Balance work of various buildings ,chain link fencing and Gate at Potato Seed Farm Gool,Ramban.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, well, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m. including getting out excavated earth and disposal of surplus excavated earth upto 50 m mtr from cutting edge. All kinds of soil.

Provinding and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering -All work upto plinth level. 1:5:10 (1 cement :5 coarse sand:10 graded stone aggregate 40 mm nomianl size) (Including all carriages and leads)

Provinding and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering -All work upto plinth level. 1:3:6 (1 cement :3 coarse sand:6 graded stone aggregate 20 mm nomianl size) (Including all carriages and leads)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering , shuttering , finishing and reinforcement. All works upto plinth level. 1:1½:3 ( 1 cement :1½coarse sand:3 graded stone aggregate 20 mm nominal size) (Including all carriages and leads)

Reinforced cement concrete work in walls ( any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pllars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) (Including all carriages and leads)

Steel reinforcement for R.C.C.work including straightening , cutting, bending, placing in position and binding all complete . Thermo- Mechanicallytreated bars grade Fe-500D or more.

Centering and shuttering including strutting , propping etc. and removal of form far:-

In foundations, Footings, bases of columns etc. for mass concrete.

Columns, pillars ,piers, Abutments , posts and struts.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: cement motar 1:6 ( 1 cement:6 coarse sand) (Including all carriages and leads)

Extra for brick work with common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor five level.

12 mm cement plaster of mix :1:6( 1 cement : 6 fine sand)(Including all carriages and leads)

Structural steel work welded in built up sections of trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer.

Steel work welded in built up section/framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder, railing, brackets, gates and similar works.

Steel work in built up tubular (round, square or rectangular hollow rubes etc.) trusses etc. including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer , including welding and bolted with special washers tubes. Hot finished welded type tubes.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. Wire of dia 4 mm.

Drilling of Holes in Angle & flat including hire charges of Generoter & c/o welding rods all complete.

Finishing walls with water proofing cement paint of required shade on New work ( two or more coats applied @3.84 kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Finishing walls with water proofing cement paint of required shade :Old work ( one or more coats applied @ 2.20 kg/10sqm) complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade , one or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required, colour to give an even shade, one or more coats on old work.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device ( handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making food the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I.brackets 15mm C.P brass pillar taps, 32 mmC.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing Stainless steel A ISI 304(18/8)Kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm , including painting of fittings and brackets, cutting and making good the walls wherever required: 470x420mm bowl depth 178mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: 40 mm dia

Providing and fixing mirror of superior glass ( of approved quality) and of required shape and sieze with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Oval shape 450x350 mm ( outer dimensions)

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS: standards and weighing not less than 810 gms.

Providing and placing on terrace ( at all floor levels) polyethylence water storage tank ISI: 12701 marked, with cover and suitable locking arrangements and making nessary holes for inlet, outlet and overfolw pipes but without fittings and the base support for tank.(4x1000 Ltr)

Providing and fixing 15 mm nominal bore C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing PTMT soap dish holder having length of 138mm. Breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass scres with concealed fittings arrangement of approved quality and colour;18.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, erighing not less than 170 gms,

Providing and fixing G.I. pipes complete with G.I.fittings excluding trenching and refilling etc ( external work) 20mm dia. Nominal bore (medium).

Providing and fixing of Geyser 35 Lt. capacity alongwith fittings complete job. Havells/ Cromton /Venus.

Providing and fixing water lift pump 1 H.P with all fittings complete . Havells/ Crompton/Kirloskar.

Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40 gms.

zakir hussain

Mohd Amin Shan