SMART PERIODICAL SERVICES TO BLDGS UNDER AGE BR II AT AMRITSAR CANTT

Amount

Note for item No. 1 to 16 :- A standing board of officers shall be convened by GE to inspect paint buckets brought by the contractor in sealed condition and to make note of Barcodes/QRcodes. Prior to each RAR board shall verify all empty containers alongwith Barcodes/QRcodes. Responsibility of presenting all paint buckets with Barcodes/QRcodes in verifiable condition shall rest with contractor. Material and labour for complete removal of existing treatment from wall Old plastered/unplastered surface, Complete all as specified and directed.

Material and labour for applying one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed.

Material and labour for applying one coat of acrylic waterbased exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed.

Material and labour for applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat with fully automatic airless spray machine having a minimum pressure of 3000 PSI +/- 20%. Complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for Finishing walls with water based anti-algal 100% acrylic smooth exterior emulsion having silicon additives in two coats @ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine having a minimum pressure of 3000 PSI +/- 20%. Complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc., Complete all as specified and directed.

Material and Labour for 15mm thick cement plastering in cement mortar 1:6 on brick or concrete surfaces on other than fair surface, finishing the surfaces even and fair without using extra cement, Complete all as specified and directed.

Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) including WPC @ 200 ml per 50kg cement Bag or as per manufacture instructions, Complete all as specified and directed. Note : WPC will be measured and paid separately under appropriate items.

Supply only liquid water proofing compound, ISI marked, Complete all as specified and directed.

Material and labour for preparation of newly plastered surface applying one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed.

Material and labour for preparation of newly plastered surface applying one coat of acrylic waterbased exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Graco or equivalent having an electric motor of min. 1/2 HP with a minimum flow speed of 1.4 ltr per minute having a pressure of 3000 PSI Allow 6-8 hrs to dry the surface for painting of subbsequent quotes on walls surfaces, Complete all as specified and directed.

Material and labour for preparation of newly plastered surface applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat with fully automatic airless spray machine having a minimum pressure of 3000 PSI +/- 20%. Complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for preparation of newly plastered surface Finishing walls with water based anti-algal 100% acrylic smooth exterior emulsion having silicon additives in two coats @ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine having a minimum pressure of 3000 PSI +/- 20%. Complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hrs.

Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grith and applying one coat of synthetic enamel paint complete all as specifed and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, with chicken wire mesh and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape complete all as specified and directed.

M/S MAHAJAN CONSTRUCTION CO (BID ID -3500636)

RAJ KAMAL BUILDERS (BID ID -3500181)

JOGRAJ CONSTRUCTION COMPANY (BID ID -3500686)