Supply of Hostel Furniture

Amount

Visitor Chair: is Over all Dimensions: W 535 x D 595 x H 820 mm Seat height 460mm. Seat size: 420 x 420 mm approx. Back size: 420 (W) x 270 mm (H) approx. Material: The seat and back shall be made up of l0 mm thick hot pressed water commercial plywood, upholstered with fabric and moulded polyurethane foam (40 mm thick with density 40-50). Tubular Frame: The main frame shall be cantilever type reinforced at the bends to give cushioning effect and added strength and made of dia 25mm x 14 gauge MS tube. Tubular Armrest Shall be made single piece PU foam reinforced with MS plate. Finish: All steel components shall be Epoxy powder coated; pre-treatment of surface. (Overall appearance of the product shall be as per photograph No.1).

M.S. PIPE COTS: Supply of powder coated cots of Size-6’x3’ H-16” frame in 1.5”x 1” pipe of 18 gauge , legs and head & leg foot rest 1.5” dia pipe of 18 gauge, vertical head & leg support pipe 6 Nos of 0.75” dia of 20 gauge, frame support pipe 4 Nos. of 1”x1” of 20 gauge, leg support pipe 2 Nos of 1”x 1” of 20 gauge, ply 12 mm thick ISI mark water proofing and Ht of head & foot 16” & 10” respectively above ply. All steel components shall be Epoxy powder coated; pre-treatment of surface. Overall appearance of the product shall be as per photograph No.2).

Chair for Students : Frame made from 20mm 16 gauge round MS pipe welded with 18 gauge perforated sheet for seat & back. Without handle. All steel components shall be Epoxy powder coated; pre-treatment of surface. Seat ht: 18”, Back ht: 30”, Seat size: 16” x 17” (front side half round), Back size: Half round 16” x 8” (Overall appearance of the product shall be as per photograph No.3).

Wooden Conference table : Size : 3000 W x 1200 D x 750 H (mm) Work Top is made up of 36 mm thick ply with 1 mm thick laminated table top finished with 2 mm thick PVC edge bending with 02 nons. Access flap up box of 300 x 120 mm is fitted on work top. Hollow legs 150 mm wide made of 18 mm thick ply with 1 mm thick laminated finished with 2 mm thick PVC edge bending. Modestry is made 18 mm ply with 1 mm thick finished with 2 mm thick edge bending.(Overall appearance of the product shall be as per photograph No.4).

Chairs of conference table: Chair Type – Non revolving and non tilting chair with armrest. Chair Frame type: Cantilever, elliptical Pipe 15 x 33 mm of 16 gauge. Chrome platted.Seat & Back rest type – padded Seat & Back – upholestery –Latheritte i.e. 0.7 to 1.5 mm thick polyurethane foam thickness used in seat.Minimum seat height from floor – 495 mm +/- 5 mm. Minimum depth of seat - 500 mm +/- 5 mm. Minimum width of seat - 500 mm +/- 5 mm. Minimum width of backrest from seat - 560 mm +/- 5 mm. (Overall appearance of the product shall be as per photograph No.4).

Khandelwal And Khandelwal

R.K. ENTERPRISES