SPL REPAIR OF OR MESS BLDG NO NP 05 OF HQ 1 1EW BDE CAMP AND ADDN ALTN OF COMD LIBRARY BLDG NO P16 OF HQ NORTHERN COMD AND PROVN OF HOT WATER SUPPLY AT OR LINE OF NCSR AND PROVN OF 01 X INCINERATOR FOR OFFICE AREA AT 9 I RO FLT UNDER GE S UDHAMPUR

Surface excavation in any type of soil, not exceeding 30cm deep and averaging 15cm deep and getting out of any type of soil complete all as specified and as directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in any type of soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil, complete all as specified and as directed.

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge/GE.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt),complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.),complete all as specified and as directed.

Taking down cement plaster of any descreption on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Dismantling structural steel work including doors, gates including framed truss etc. complete all as specified.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

Dismantling Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified and as directed.

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping, benching and similar work etc including necessary form work complete all as spcified and directed.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed.

M&L for 75mm thick Plain cement concrete type B-2, 1:3:6 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc ,complete all as specified and as directed.

M & L for providing Precast RCC 1:2:4 type B1 using 20mm graded aggregate as in landings, cover slabs (for manholes etc.),chajjas, shelves and similar articles with plain faces set in CM 1:4 complete plain fair faces, including chamfers, weathering, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and as directed.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and as directed by the Engineer-in-Charge

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) as in manholes,Septic Tank,Wall,Drain etc complete all as specified and directed

M & L for hardcore of broken bricks n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement,complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for Non skid Ceramic coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc incl 15mm thick screed bed in cement mortar 1:6 for laying floor finishes under floo etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface,complete all as specified and as directed.

M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for machine cut Kota stone slab flooring 18-20mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm or 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

S&F Vitrified Dura stone tiles of size n exc 0.36Sqm of 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:6, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed

M&L for rolled section as in main and cross beams, purlins, rafters, posts where connected to common rafter and running rails, frame work of eves board, tank staging work etc conforming to Fe- 410-W complete all as specified and as directed.

M&L for vitrified tiles (double charge glossy finish), area of each tile exc 0.42sqm but not exc 1.00 Sqm, 8-10mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified (double charge glossy finish), area of each tile exc 0.42sqm but not exc 1.00 Sqm, 8-10mm thick (square or rectangular) as in skirting/dado of wall surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, complete all as specified and as directed.

Providing and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made,complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 28 to 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Butt hinges and necessary S.S screws shall be paid separately),complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type wire mesh door shutter of size 28 to 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made uPVC white/coloured sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white/coloured fixed glazed window/ventilator/Partition walls made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

All as per item No 42 above but without glazing bar complete all as specified and as directed.

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay;complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde E-165. complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane,complete all as specified and as directed.

S&F 4mm thick sheet glass frosted ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane,complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple,complete all as specified and as directed.

S&F 4 mm dia galvanised steel wire 50 mm x 50 mm mesh made up in to matresses or cages to water tank etc complete all as specified and as directed.

S&F aluminium barrel tower bolts, Cast type anodised, with bright bolt 200mm long complete all as specified and as directed.

S&F butt hinge 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) of size 250mm,and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed.

S&F in repair curtain/Harrison rails of stainless steel, chromium plated with fixing brackets, stops, end bulbs, rollers etc complete all as specified and directed.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge.

M&L for one layer wall care putty on wall complete all as specified and as directed

M&L for preparation of newly plastered surfaces on wall/roof projection including facia, cornices etc and applying exterior water proof wall care putty @ 1 Kg (undiluted) per sqm of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces, on e or more coats and grinding the puttied surface with mechanical grinder for make the surface even and smooth for receiving primer and applying two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives & colour stay technology, excellent primer applied @0.9 litre (undiluted)/10 Sqm diluted with water as per manufacture instructions over and including priming coat of exterior primer applied @ 1.79 litre/10 Sqm diluted with water as per manufacturer instruction over and including priming coat of paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of opening single spray gun with a mix material hose length of 30 mtr the spray machine should be reputed.

Note :- The work for periodical services shall included the following and the rates quoted by the bidder shall included the same : (a) The work pertains to periodical services shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc approval by the GE. (b) The Contractor shall submit the documents under cover I "Memorandum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract. (c) Use of scaffolding, trestle, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of nails, making good holes, cracks etc. (e) Work in patches and in narrow/width, bands, cornices, pilasters etc and cutting in edge of line where necessary.

Note :- (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floor, cleaning glass, joinery, electric fittings, wiring etc, drops and splashes of paint be cleaned to the ensure satisfaction of Engr in Charge. (h) Sample patch of 10 Sqm be repaired considering all the items of periodical and shall be got approved from GE prior to carrying out further work. (j) The work shall be carried out op to 4 storey. (k) Incl removal of vegetation on walls incl roots on wall surfaces.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S & F in repair 15mm bore bib tap of cast copper alloy fency type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repair WHB coloured 550 mm x 480 mm with Pedestal in repair as approved and complete all as specified and directed by Engr-in-Charge. Make :CERA Cat Part No (S2040115 & S2090111).

S & F 15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed.

S & F 20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed.

M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and PTMT ball valve 20mm dia including taking down of old tank and removing from site complete all as specified and as directed.

S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and directed

M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm, complete all as specified and as directed.

S&F in repair 15 mm dia Angle valves/ stop cock ,fancy type and chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera/Parryware

S&F 10-12 mm thick gypsum boards seamless false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed. Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer

S&F 0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, complete all as specified and as directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550 Mpa as in roof covering, wall cladding with self tapping screws or 'L' type or 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, complete all as specified and as directed.

S&F Anodised aluminium door shutters with frame powder coating of any colour (Thickness or powder coating not less than 50 micron ) , aluminium section weighing 0.55 kg/m including with suitable locking arrangement with lock (Make: Godrej) 4 lever, 5.5mm thick tinted glass, 5mm thick aluminium push plate, hydrolic door closer-01 No, pivet with standard floor spring and pivot on top frame, aluminium tower bolts 300 mm long-01 No, glazing clips, rubber packing for locking purpose with aluminium snap beading screws, handles 2 Nos in each door, hinges, etc. complete all as specified and as directed.

M&L for kitchen cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet all reqrired brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edbes shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawing with locking arragement approved by Engr-in-Charge. Colour as approved by GE. (Make: Rajshree/Sintex or equilent) complete all as specified and as directed.

S&F PVC steel catcher of superior quality all as specified and directed by Engr in charge

S & F Hetich softcloser hinges of stainless steel premium quality complete all as specified and as directed.

Fancy type Brass handles 100mm size fixed with screws, complete all as specified and as directed.

S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6. complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick woodgrain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

S&F 16.5 thick laminated toughned glass consiting of 8mm toughened + 0.5mm PVB + 8 mm toughened (Total 16.5mm) as in ceiling and similar work including cutting to shape, drilling holes, stainless steel clips, joint filling compound/silicon etc connected premium accessories as required complete all as specified and as directed. Anti-slip coatings or fritted patterns to be provided to the top surface to prevent slipping during cleaning.

S&F 20mm dia stainless steel powder coated fancy type tubular curtain rail with brackets and end bulb as per requirement. all as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/Metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall / ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white/ colour wash complete all as directed.

All as per item no 87 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board.

All as per item no 87 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch.

All as per Srl item No 87 but for 3/5 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.

All as per Srl item No 87 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4 Sq mm including copper PVC insulated PVC unsheathed suitable earth wire standard and connected to earth dolly.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed.

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge.

S&F Sheet metal enclosure double door type for MCCB VTPN DB upto 160 Amps, 4 way vertical type 415 volts with suitable rated busbar and neutral link including MCCB 125 Amps , chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F sheet metal enclosure MCB distribution board triple pole& neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link,fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed .

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of four poles and current carrying capacity of 63 Amp in the DB complete with connection testing and commissioning all as specified and Directed by Engr-In-Charge.

S & F in replacement MCB Single pole and neutral 240 volt any rating from 40/63 amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable .

S & F in replacement MCB single pole 240 volt any rating from 6 to 32 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable .

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 10 Sq mm as earth lead all as specified. Including taking down old sub main wire.

M&L for sub main wiring with PVC insulated 1100V grade FRLSH single core multi stranded copper conductor cable of size 2x6 sqmm + 1x6 sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Make- Finolex/Havells/Polycab Note - Two runs of 6 sqmm & one run of 6 sqmm including PVC conduit shall be measured as unit length.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

S & F wall lamp with holder, PVC/Polycarbonate type with cord grip cap suitable for light fittings.

Supply and fixing LEDBulb 15W, 230V,AC suitable for Angular Lamp holder complete all as specified and directed.

Supply and fixing replacement LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F replacement LED light fitting 1X9W/10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize complete all as specified and as directed.

Supply and fixing replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 4 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately.

S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified and as directed.

Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.

Supply and fix electric water heater,storage with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers.

Supply and fixing 240V,10 KA 'C' curve miniature circuit breaker (MCB) SP having current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning all as directed and specified.

S & F Switch socket combination 2 in 1, 3/5 pin, 6 and 16 Amp flush type universal 230V, 50 Hz complete all as specified and directed

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm(Set of two) complete all as specified and directed.

S & F fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm dia complete all as specified and as directed.

Supply and fixing in repair LED building security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply, laying and testing service connection cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core