REPAIRS TO JOINERY, ROOF SHEETS, GI AND SANITARY FITTINGS AND MISC B/R WORKS OF CERTAIN UNITS OF NAGPUR AREA UNDER GE KAMPTEE

Amount

Taking down chowkat with shutter (without taking off shutter from frame) area exc 1.50 Sqm but nexc 4.00 Sqm each complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from frame) area not exc 1.50 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

Taking down shutter of any description not exc 1.00 Sqm each complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, partition etc complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq cm in section frame work in any position complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, block or similar work and finished the surface with existing and including form work complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats & frame, wrought framed on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0 complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making hold fast and fixing in concrete 1:3:6 type C-1 including tie bars of 10mm dia and hold fast of flat iron confirming to Fe 290 (Gde E-165) complete all as specified and directed.

S&F 35mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12mm thick veneered particle board or 9mm thick plywood with commercial veneering on both faces, the size of rail and style as per IS 1083 (part-I) kiln seasoned and chemically pressure treated of any number of panel complete all as specified and directed.

S&F 2nd class hard wood, 35mm thick glazed skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction with block board and plywood face panels, commercial type both side complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified on drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame, made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat moulded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail, lock rail & bottom rail on either side complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, with glazing bars dovetailed or welded complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F sheet glass, ordinary quality, 3mm thick with oil putty in sequence not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F mild steel, medium weight, cold rolled 100mm size butt hinges complete all as specified and directed.

S&F mild steel, medium weight, cold rolled 75mm size butt hinges complete all as specified and directed.

S&F mild steel, medium weight, cold rolled 50mm size butt hinges complete all as specified and directed.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F 150mm long aluminum handles, cast type, anodized complete all as specified and directed.

S&F 100mm long aluminium handles, cast type, polished bright complete all as specified and directed.

S&F in repairs hasp and staple, aluminum anodized, 75mm long including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for second class hard-wood plain fillets, square, rectangular or triangular in section exc 13cm and not exc 25 sqcm sectional area, clean sawn, secured with nails or brads in cupboard and similar work etc complete all as specified and directed.

M&L for 12mm thick plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed.

M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or brads, sectional area not exc 3 Sqcm complete all as specified and directed.

S&F anodised aluminium frame for door, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles - 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung type/ sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for 9mm thick prelaminated particle board, exterior grade, pre-laminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified and directed.

S&F 4.8mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed.

S&F grills and gratings etc framed angle iron and ms sheets etc and guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 290 Gde E165 complete all as specified and directed.

S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets etc complete all as specified and directed.

S&F in repairs braket, brass, chromium plated for fixing of Harrison rails complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

M&L for 6mm thick non asbestos cement corrugated or semi- corrugated sheets in roof, walls including fixed with L type or J type or cranked hook bolts complete all as specified and directed.

M&L for 6mm thick non asbestos cement one piece plain angular ridge including fixed with L type or J type or cranked hook bolts complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.30mm thick of size 24x24mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.3mm thick with height 32mm and cross Tee 0.3mm thick with height 28mm suspended from soffit at approx 1200mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 2mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations complete all as specified and directed. Notes:- (i) Ceiling boards shall be measured separately. (ii) The grid system shall be as per specifications of make as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595 x 595 x 4mm fixed or laid/inserted to GI frame work with screws/ clips as in ceiling laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

Dismantling of wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to IS 1161-1979 grade Fe 290 (Gde E-165) complete all as specified and directed.

Removing existing water proofing treatment on roof including screed bed and scrubbing down with water etc and removing the same beyond premises of MD land complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on mineral/slate finished membrance over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane having non woven polyster film reinforcement with 3mm thick and weight not less than 3.00 kg/sqm and finished on top with mineral/slate finished torch on system laid with 100mm & 150mm over lap on side & end laps resepectely all as per manufacturers instructions over and including rendering 15mm thick in cement mortar 1:3 on concrete surfaces complete all as specified and directed.

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) finished the surface fair & even complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparing new plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for removal of rubbish/debris MD land complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for moorum/sand /stone dust filling in floors or pavings, laid in layers not exc 15cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry and pointed in coloured pigment to match the shade of tiles over & including 15mm thick cement screed bed in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40mm thick for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate)in floors finish concrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in mortar complete all as specified and directed.

M&L for 18-20mm thick pre-polished granite (of any type) work (table rubbed and polished) in steps, jams, pillars; cooking platforms and likes in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite including necessary notching, chamfering the edges complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Dismantling of unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square or rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles over & including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square or rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm in vertical surface etc, set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles over & including 10mm thick cement screed layer in cement mortar 1:4 complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles over & including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles over and including 10mm thick screed layer in cement mortar (1:4) etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for colored glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm /300x 450x 7mm thick set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of tiles over & including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for removal of rubbish/ debris outside of MD land complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with mild steel (annealed) wire not less than 0.90mm dia complete all as specified and directed.

M&L for TMT bars of 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape as required, including cranking, bending spirally etc. and binding with and including MS (annealed )wire not less than 0.9mm dia complete all as specified and directed.

M&L for providing RCC 1:11/2:3 type A-1 (nominal mix) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slury 1:3 complete all as specified and directed.

M&L for 25mm (avg) thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement using water proofing liquid @ 200 ml/50 kg of cement complete all as specified and directed. Note:- Water proofing liquid will be measured & paid separately.

Supply only liquid water proofing admixture of Make:- Pidilite or equivalent complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs plastic water closet seat, black/ white closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern of size 580 x 440mm with integral foot rest, S or P trap including connection to trap and to flushing pipe etc including making good to floor complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including bracket etc complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm, white including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F in repairs sinks made of stainless steel, 1mm thick in kitchen or laboratory with pIugs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size 900 x 600mm complete with fixing arrangement complete all as specified and directed.

S&F 32mm long waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 40mm long waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 15mm bore GI water tubing, medium grade, galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down existing steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20mm bore GI water tubing, medium grade, galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down existing steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F in repairs 32mm bore low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm complete all as specified and directed.

S&F in repairs 40mm bore low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm complete all as specified and directed.

S&F in repairs 15mm bore chromium plated bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar tap, brass CP, fancy type complete all as specified and directed.

S&F in repairs 15mm dia brass CP, fancy type, stop valves/ angle cock with fixing arrangements complete all as specified and directed.

S&F PVC connections of 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 125mm size shower rose, brass chromium plated complete all as specified and directed.

S&F in repair 15 mm dia bib tap standard of PTMT of any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position and including dismantling of existing water tank and removing from site complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position and including dismantling of existing water tank and removing from site complete all as specified and directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms) complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms) complete all as specified and directed.

S&F in repairs brass CP tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed.

S&F in repairs grating dome 100mm dia of PTMT (Min weight 25 gms) complete all as specified and directed.

S&F cast iron floor trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/ from walls including fittings as bands, branch pieces, traps etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal, 75mm dia complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal, 100mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

S&F PVC (SWR) 'S/P' trap 100/110mm bore complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed in floor/wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.51,245.00]

M/s Earth Technology and Construction

Bidder Name

khushal constructions

M/s Earth Technology and Construction