Electrification to the PHC (Ground Floor) at Doodasan Thanamandi Rajouri. (4th Call)

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire

2 x 2.5 sq mm + 1 x 2.5 sq. mm earth wire

2 x 6 sq.mm + 1 x 6 sq.mm earth wire

2 X 10sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

4 X 6sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

100 mm X 100 mm X 60 mm deep

200 mm X 250 mm X 100 mm deep

250 mm X 300 mm X 100 mm deep

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 Amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutralbus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Single Pole and Neutral

Triple pole and neutral

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supply, installation, testing & commissioning CPRI Approved of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly and having ROHS certification GI Electrode Earthing should be maintinance free and does not require regular manual addition of water GI Electrode shall be tested from CPRI. The earthing pit should be covered with PVC cover. along with providing and laying of 25 x 5 mm G.I strip from G.I rod upto the main panel.

Supply, installation, testing & commissioning of CPRI Approved maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water.The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly and having ROHS certification. The earthing pit should be covered with PVC cover. along with providing and laying of 25 x 3 mm copper strip from copper rod upto the main panel.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required

50 mm dia

100 mm dia

Design,Fabrication, supplying, installation testing and commissioning of cubical type prewired LT panel suitable for 3 phase 4 wire,50 Hz AC supply system floor/wall mounted fabricated in compartmentalized designfrom CRCAsteel 2mm thick for frame work and covers, 3mm thick gland plates including cleaning and finishing,powder coated dust and vermin proof complete with extensible type TPN Aluminium alloy bus bar of high conductivity with base frame of M.S.Chanel section not less than 75mmx50mmx5mm thick,copperearth bar of size 25mmx5mm at the rear end with 2 No earth studs complete with control wire,cable alleys,cable gland plates, with suitable size of angle iron legs for grouting in the ground, and lockable type hinged doors with provision for fixing of 1 no incomer MCCB, outgoing MCB's,MCCB'S MCCB type change over switch's, required number of sets of Aluminium Bus Bar, providing & fixing . strips for housing MCB's and other allied accessories etc. as required. (Make as per annexure). ( The Manufacturer shall have CPRI/NABL accredited laboraties certification for similar panels) Main Panel = 16Cft.(APPROX)

Supplying and fixing of following rating 240 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning (Make as per annexure enclosed).

Single Pole and Neutral 40 Amp.

Single Pole and Neutral 63 Amp.

Triple Pole and neutral 40 Amp.

Triple Pole and neutral 63 Amp.

Supplying and fixing of Following light fitting with lamps on ceiling/ wall with necessary connection from ceiling rose to fitting by twin core flexible copper wire etc as required.

Supplying and fixing of surface mounted 18 watt batten LED tube fiiting 4 feet long including connections etc as required.

Supplying and fixing of surface 15 watt LED type. Ceiling light including connections etc as required.

Supplying and fixing of surface 15 watt LED type highly efficient downlight with efficacy of 100 lm/W including connections etc as required.

Supplying and fixing of 7 watt LED type downlighter. Ceiling light including connections etc as required.

Supplying and fixing of 7 watt LED surface type . Ceiling light including connections etc as required.

Supplying and fixing of Angle/Baten Holder(metal ring) with 9 watt LED Lamp polycarbonate including making complete connnections etc as required. (Make as per annexure enclosed)

Supplying and Laying of PVC insulated and PVC sheathed XLPE Power Cable of following rating direct in ground including excavation and refiling the trench etc as required including carriage upto site of work.The laying of cable in ground should be in the suitable size PVC pipe and suitable size G.I Pipe under flooring/ road crossing.

10 Sq.mm x 4 Core Armoured

70 Sq.mm x 3.5 Core Armoured

120 Sq.mm x 3.5 Core Armoured

Supplying and fixing of following electrical items.

15 Amp. Plug Top

5 Amp. Plug Top

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.

Ceiling fan 1200 mm sweep(5 star) alongwith 1"-6" long fan rod. Prefered make as per list of approved make.

Supplying & fixing 70 watt LED street light fitting with 10KV Built-in SPD complete with the suitable size of GI pipe bracket duly embedded in the wall/parapet including connections etc as required.

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.in main panel.

MCCB FP 250Amp. 36 KA FP ICU=ICS=100%

MCCB FP 125 Amp. 18KA

Change Over Switch FP 100 Amp. MCCB type

High conductivity electrolytic grade Aluminium Bus Bar(E91) suitable for 500 Amp. TPN duly colour coded with heat shrinkable sleeves

CT Set of suitable rating

Indicating Lamp

Voltmeter (0-500) Volts Digital type

Ammeter (0-500) Amps. Digital type

MCB Strip for 8 Nos. MCB's

High conductivity electrolytic grade Aluminium Bus Bar(E91) suitable for 300 Amp. TPN duly colour coded with heat shrinkable sleeves

Supplying and fixing following size/ modules, GI box on surface or in recess alongwith modular base & cover plate for modular switches in recess etc as required.

3 Module

6 Module

8 Module(horizontal)

12 Module

1 or 2 Module (75 mmX75 mm)

Supplying and drawing 1x 1.5 sqmm FRLS PVC insulated copper conductor single core cable in th existing surface/ recess PVC conduit for invertor wiring as required

1X1.5 SQMM INVERTOR WIRING

Supplying installation testing and commissioning of 1650 VA sinewave invertor complete with Tabular batteries of rating 150AH and Trolly.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in partially laid surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

abdul qayoom