Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹7.7 L
Closing Date
9 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S&T work in connection with provision of track machine stabling lines including various track renewal works at various stations across Danapur Division.
DNRSnTSig2026-13~ECR
DNRSnTSig2026-13
Open
Works - General
18 Months
Patna, Bihar
₹0
₹7.7 L
17 Aug 2026
17 Aug 2026
26 Aug 2026
132 items across 11 schedules · ₹2,74,93,921.34 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Modification/Alteration i n existing E I (Electronic Interlocking) a s p e r l a t e s t RDSO guidelines/TAN. I t includes: Design a n d modification i n existing Interface and Interlocking circuits and logic o f E I system including modification i n the VDU (Video D i s p l a y U n it ) / L C P ( L o c a l C o n t r o l panel)/CCIP (Control c u m Indication Panel), Maintenance terminal (MPC), Data Logger, Relay rack wiring. The complete work should comply with the latest RDSO specifications and guidelines and as per approved SIP and circuit diagrams. All the material (Interface cards/ relays/ wiring material/ connectors/ fuses/ communication devices etc.) shall be provided by the contractor. The work also includes the supply of modified Selection table, Interface Circuits, VDU/LCP/CCIP diagram etc. to suit the modified SIP. It also includes the carrying out of FAT, SAT (as applicable) jointly with Railways a n d satisfactory commissioning. A l l plans/drawings/ circuits etc. should be prepared on AUTOCAD, soft copy to be supplied on Pen Drive and 06 sets of hard copies also to be supplied. (Alteration in RCC to be considered)- Alteration involving modification in up to10 routes. Alteration involving modification from 11 upto 20 routes. | Per Alteration | 3.00 | 30,03,080.85 | 90,09,242.55 |
| 2 | "Designing and Plotting of Signalling Interlocking Plan (SIP) in AUTOCAD. Two copies of prints with soft copy will be submitted to Railway for checking. If alterations are suggested /propose by Railways, then again two copies of prints will be submitted for advance approval after carrying out all the alterations as suggested/proposed by the Railways. Tracings will be submitted for all the diagrams mentioned above for the purpose of approval by Railway prior to commissioning ofstation. The approved SIP shall be finally supplied in 02 nos. Pen drives of 128GB each for each station. SIPs may be station SIP/ABS/IBH etc. Up to 4 lines" | Per SIP | 2.00 | 34,218.73 | 68,437.46 |
| 3 | "Designing and Plotting of Signalling Interlocking Plan (SIP) in AUTOCAD. Two copies of prints with soft copy will be submitted to Railway for checking. If alterations are suggested /propose by Railways, then again two copies of prints will be submitted for advance approval after carrying out all the alterations as suggested/proposed by the Railways. Tracings will be submitted for all the diagrams mentioned above for the purpose of approval by Railway prior to commissioning ofstation. The approved SIP shall be finally supplied in 02 nos. Pen drives of 128GB each for each station. SIPs may be station SIP/ABS/IBH etc. 5 Lines to 8 lines station" | Per SIP | 1.00 | 42,750 | 42,750 |
| 4 | "Preparation, printing and Alteration of Route Control Chart (TOC/RCC) based on approved SIP as per the extant practice being followed in E. C. Railway. Contractor shall supply two print of the TOC/RCC (paper print Size as required) as draft forapproval and comments. Once the approval is given shall tracing of the TOC/RCC on good quality flim paper of thickness not less than 75 micorns for signature of all officials. On approval, the contractor shall supply 12 copy blue print of the tracing. The approved TOC/RCC shall be finally supplied in 02 nos. Pen drives of 128GB each for each station.Up to 100 Routes." | Station | 2.00 | 16,450 | 32,900 |
| 5 | Preparation, printing and Alteration of Route Control Chart (TOC/RCC) based on approved SIP as per the extant practice being followed in E. C. Railway. Contractor shall supply two print of the TOC/RCC (paper print Size as required) as draft forapproval and comments. Once the approval is given shall tracing of the TOC/RCC on good quality flim paper of thickness not less than 75 micorns for signature of all officials. On approval, the contractor shall supply 12 copy blue print of thetracing. The approved TOC/RCC shall be finally supplied in 02 nos. Pen drives of 128GB each for each station. From 101 Route to 300 Routes. | Station | 1.00 | 23,500 | 23,500 |
| 6 | "Supply and installation of Class ""A"" Early streamer Emission lighting conductor (ESELC) fully autonomous having lower series o f energy collecting electrodes upper series o f spark - generating electrodes, as in built micro controller for detection of lightning down ward leader and releasing upward ladder at that very precise moment to ensure nuisance free , fail safe ,real need based operation any and every time ,sealed in a stainless - steel housing fixed at the center of its central rod which has full electrical connectivity direct up to earth point ,gain in triggering time of 25 micro sec giving 7 5 meters radius, level I high protection, real life & high voltage laboratory tested, CPRI tested.Inspection - RITES" | Station | 3.00 | 3,61,468.98 | 10,84,406.94 |
| 7 | Supply and erection of Class "A" mast/high mast suitable for ESE Technology based lighting protection installation ,mechanically robust good corrosion and fire resistance 5 meter ( including 2 meter FRP) long GI/MS painted, along with guying kit foundation and other accessories required for installation of the mast. Inspection - RITES | Station | 3.00 | 7,769.24 | 23,307.72 |
| 8 | Supply and laying of 70 sq. mm. PVC insulated flexible tinned electrolytic copper down conductor placed i n a metallic/PVC protective covering wherever exposed t o human intervention including saddles and all accessories etc. as required. Inspection - RITES | Metre | 2.00 | 1,361.21 | 2,722.42 |
| 9 | Supply & installation of resettable 6 dight LCD lighting stock recorder /transient event counter with 10 year long life lithium battery in an all whether proof box of IP67 grade protection along with clamps etc. as required. Inspection - RITES | Numbers | 3.00 | 60,478.96 | 1,81,436.88 |
| 10 | Supply and fixing of Equipotential Earth Bonding unit between electrical & equipment earthing i n a explosion proof IP68 ensoure with inspection chamber f o r equipotential bonding during a surge. Inspection - RITES | Station | 3.00 | 46,929 | 1,40,787 |
| 11 | "Supply and laying of 25 x 3 mm. pure electrolytic copper tape through suitable 'Class B' G.I pipe for loop earthing and bonding as per siterequirement.Inspection - RITES" | Metre | 20.00 | 1,279.06 | 25,581.2 |
| Schedule total | ₹1,06,35,072.17 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DocSig2026-13.pdf
ATTACHMENT
ACSGCC20221to11.pdf
ATTACHMENT
ECRJPOregardingprocedureforundertakingearthworkdiggingworktrenchingworkinthevivinityofsignallingtelecomandelectricalcables.pdf
ATTACHMENT
GCC_April-2022_2022__GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].