Loading
Loading…
Loading…
Tender Value
₹90.0 L
EMD Value
₹1.8 L
Closing Date
26 May 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECT.G
17 conditions · 5 needing a document upload
Financial Eligibility Criteria: (Ref: RB letter No. 2022/CE- I/CT/GCC2022/POLICY : Advance Correction Slip No.-1 dt 14.07.2022) The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The intending tenderers should possess a valid electrical contractor license at the time of opening of tender, issued by any state government & same should be submitted along with tender documents by all bidders including working contractors of this unit otherwise offer shall be summarily rejected....... IT SHOULD BE NOTED BY THE TENDERER THAT ELECTRICAL LICENSE UNDER RENEWAL AT THE TIME OF TENDER OPENING WILL NOT BE CONSIDERED AND OFFER WILL BE SUMMARILY REJECTED. IT IS THE RESPONSIBILITY OF TENDERER TO UPLOAD VALID ELECTRICAL CONTRACTOR LICENSE ON THE DATE OF TENDER OPENING.
All requisite documents mentioned in clause 3.7 of the tender document attached pertaining to constitution of firm/concern. (As applicable).
36 conditions · 4 needing a document upload
The rate to be quoted by tenderer shall be inclusive of all state/central taxes including GST. THE TENDERER SHOULD UPLOAD VALID GST REGISTRATION CERTIFICATE ALONG WITH THE OFFER.
The tender shall comply with General Condition of contract (GCC),2022 of Indian Railways (file attached). and its latest amendment, if any. The tenderer shall submit the offer after duly satisfying himself/herself with the GCC,2022 in general.
Tenderers are required to upload the Bank details as per Annexure-XII (Real Time Gross Saving (RTGS)/National Electronic Fund Transfer (NEFT) Model Mandate Form)of tender document.
Tenderers are required to upload requisite details as per Annexure-VIIB (DETAILS OF CONTRACTUAL PAYMENT RECEIVED IN LAST THREE FINANCIAL YEARS AND CURRENT FINANCIAL YEAR) without which the offer is liable to be rejected.
Tenderers are compulsorily required to upload Affidavit as per Annexure-XXIV along with tender document, without which the offer will be considered incomplete and will be rejected summarily.
All requisite documents/credentials mentioned in clause 3.5 of the tender document attached pertaining to his/their technical and financial eligibility. (As applicable).
All requisite documents mentioned in clause 3.7 of the tender document attached pertaining to constitution of firm/concern. (As applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenderer/s shall be treated as Null & Void.
Defective parts shall only be replaced with OEM's spares. Proper invoices/delivery challan /warranty certificate etc. shall be provided by the firm to prove genuineness of spare parts.
This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017.
IF ANY DISCREPANCY IS FOUND IN THE TENDER DOCUMENT, NAMELY SOR ITEM DESCRIPTION, SPECIAL TENDER CONDITION ETC., CLARIFICATION CAN BE SOUGHT FROM THE OFFICE OF SRDEE/G/DLI, DRM OFFICE, STATE ENTRY ROAD, NEW DELHI.
This tender complies with Railway Board instructions for Startups (recognized by Department of Industrial Policy and Promotion, Ministry of Commerce and Industry) for exemption from payment of Bid Security as detailed in GCC 2022 as amended from time to time. Such Startup firms may note that no other exemption is applicable to them in this particular tender.
On account payment, contractor shall submitted indemnity bond with validity up to the completion/extended period in the prescribed format (please refer Annexure-XXVIII) at the contractor's cost, vesting the ownership of such material with the railways.
This tender shall also complies with "Indian Railways Standard General Conditions of Contract, April 2022 (Advance Correction Slip No. 11)" vide Railway Board letter No. 2022/CE-I/CT/GCC- 2022/POLICY/Pt.I (E-3320424), dated: 13.03.2026 (attached)
All disputes or differences of any kind whatsoever arising out of or in connection with this contract, whether during its execution or after completion, termination, or breach thereof, shall be subject to the exclusive jurisdiction of the competent courts at New Delhi only.
The issues not covered under this tender document shall be governed by General conditions of Contract (GCC) 2022 or its latest amendments if any during entire period of contract. If any contradiction in Tender Document and GCC is observed then GCC shall prevail.
Electrical work in connection with (i) Improvement to damaged flooring, walls, rooms, halls, staircase of Accounts Building Annexe-II at Baroda House New Delhi ii) Improvement of General Admin Section of G branch, GM's Conference hall at main building at Ground Floor & first floor at Annex-I at Baroda House iii) Improvement of halls, rooms of store department in Annexe-I at Baroda House
78-SRDEE-G-DLI-2026-27
78-SRDEE-G-DLI-2026-27
Open
Works - General
9 Months
Delhi, Delhi
₹0
₹1.8 L
26 May 2026
4 May 2026
12 May 2026
57 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Above/ 8997820.00 Below/P | ||
| — | 1330.00 | — | — | ||
| Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core etc. as required and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 and conforming to IS 732:2024 or latest & as per explanatory note. Group C | — | — | — | 18,75,300 | |
| — | 5200.00 | — | — | ||
| Supply and recessing/fixing of PVC conduit pipe of 25mm size conforming to IS 9537 Part-III: 1987 (or Latest version) with accessories junction box, bends etc. including making chase, plastering/clamping etc. as per site requirement conforming to IS 9537 (Part 3) latest & as per explanatory note. | — | — | — | 1,61,200 | |
| — | 15600.00 | — | — | ||
| Supply, Fixing, testing & commissioning of following sizes FRLSH PVC insulated multi stranded copper (annealed) conductor single core cable conforming to IS 694 (or Latest Version) , and drawing in Laid (recessed /surface) PVC conduit pipe for wiring of point wiring / circuit wiring / sub main / main including connections, testing and commissioning & as per explanatory note. 1x2.5 sq.mm | — | — | — | 6,24,000 | |
| — | 6000.00 | — | — | ||
| Supply, Fixing, testing & commissioning of following sizes FRLSH PVC insulated multi stranded copper (annealed) conductor single core cable conforming to IS 694 (or Latest Version) , and drawing in Laid (recessed /surface) PVC conduit pipe for wiring of point wiring / circuit wiring / sub main / main including connections, testing and commissioning & as per explanatory note. 1x4.0 sq.mm | — | — | — | 3,18,000 | |
| — | 1800.00 | — | — | ||
| Supply, Fixing, testing & commissioning of following sizes FRLSH PVC insulated multi stranded copper (annealed) conductor single core cable conforming to IS 694 (or Latest Version) , and drawing in Laid (recessed /surface) PVC conduit pipe for wiring of point wiring / circuit wiring / sub main / main including connections, testing and commissioning & as per explanatory note. 1x10.0 sq.mm | — | — | — | 2,43,000 | |
| — | 400.00 | — | — | ||
| Supply, fixing, testing and commissioning of following modules, GI box alongwith modular base and cover plate for modular switches/ sockets in recess etc. as required as per IS, IE rules and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 conforming to IS 3854 latest version & as per explanatory note. Size= 8 Module | — | — | — | 49,600 | |
| — | 800.00 | — | — | ||
| Supplying and fixing following modular switch /socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required conforming to IS 3854 2023 or latest and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 conforming to latest relevant IS & as per explanatory note. 6 Amp Switch | — | — | — | 42,400 | |
| — | 1200.00 | — | — | ||
| Supplying and fixing following modular switch /socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required conforming to IS 3854 2023 or latest and site requirement complete and conforming to CPWD General Specifications for Electrical Works Part-I Internal - 2023 conforming to latest relevant IS & as per explanatory note. 3 pin 5/6 A Socket outlet | — | — | — | 1,20,000 | |
| — | 400.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required and conforming to IS 3854:2023 or latest & CPWD General Specifications for Electrical Works Part-I Internal - 2023 & as per explanatory note. | — | — | — | 1,77,600 | |
| — | 260.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required and conforming to IS 3854:2023 or latest & CPWD General Specifications for Electrical Works Part-I Internal - 2023 & as per explanatory note. | — | — | — | 1,44,820 | |
| — | 49.00 | — | — | ||
| Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required confirming to CPWD DSR (E&M) 2022 & as per explanatory note. | — | — | — | 33,075 | |
| — | 100.00 | — | — | ||
| Provision of energy efficient 230V, 50Hz a.c. ceiling fan with BLDC motor of size 1400mm sweep having wattage of 35W, 5 star, speed regulator operation: Using Remote Control, 36 months warranty complete as per IS :374:2019 or latest, IE rules & site requirement. It shall also include the scope of supply and installation of safety cord of SS as per IS:302 Part 2 Sec-80. Dia & length of such cord shall be as per recommendation of OEM of fan and same shall be approved by railways & as per explanatory note. | — | — | — | 3,65,000 | |
| — | 110.00 | — | — | ||
| Supply, fixing, testing and commissioning of 400mm sweep wall mounted fan complete conforming to latest relevant IS/IEC specifications & as per explanatory note. | — | — | — | 2,35,620 | |
| — | 25.00 | — | — | ||
| Supply, fixing, testing and commissioning of 200mm sweep fresh air fan complete conforming to IS 2312 or latest & as per explanatory note. | — | — | — | 43,450 | |
| — | 220.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED light luminaire, having system wattage 1x18 watt. LED tube and inbuilt LED driver, CRCA body powder coated, complete with all mounting arrangement, accessories. The LED based 4 ft. tube light (lamp) shall be conforming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest at Tech Spec-I attached & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') at Tech Spec-II attached or latest & as per explanatory note. | — | — | — | 1,41,460 | |
| — | 220.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED light luminaire, having system wattage 2x18 watt. LED tube and inbuilt LED driver, CRCA body powder coated, complete with all mounting arrangement, accessories. The LED based 4 ft. tube light (lamp) shall be confirming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest at Tech Spec-I attached & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') at Tech Spec-II attached or latest & as per explanatory note. | — | — | — | 2,39,360 | |
| — | 100.00 | — | — | ||
| Supply of LED light luminaries 300x300mm size (1x1), having system wattage less than or equal to 15W (approx.), CRCA body powder coated, high efficiency milky white PMMA diffuser with no bright spot visible complete confirming to CEE/NR's spec. No. CEE/NR/121- Elect/PS/2018 (Rev- '3') or latest at Tech Spec-I attached & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') at Tech Spec-II attached or latest & as per explanatory note. | — | — | — | 1,23,600 | |
| — | 350.00 | — | — | ||
| Design, Supply, Fixing, testing and commissioning of Recessed luminaire with LED (Light Emitting Diode) system power: 32 W, Luminous flux of luminaire 3840 lm, 120 Lm/w, Colour temperature 3000 K/4000 K/5700 K/ 6500 K (As per ANSI Bin),, CRI > 80, R9>20, THD<10%, P.F>0.95, Driver Efficiency>85%, SDCM<3, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, 1.4 mm thick extruded aluminium profile with Polyester powder white colored coat applied over a 5- stage pre-treatment, Protruded Prismatic diffuser for glare-free uniform illumination, UGR<16, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class I, IP 40, L = 595 mm, B = 595 mm, H = 75 mm, A = 14 mm. & confirming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest at Tech Spec-I attached & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') at Tech Spec-II attached or latest & as per explanatory note. | — | — | — | 15,05,000 | |
| — | 175.00 | — | — | ||
| Design, Supply, Fixing, testing and commissioning of LED recess mounted luminaire with LED (Light Emitting Diode) system power: 25W, Luminous flux of luminaire 3500 lm, 110 Lm/w, color temperature of 3000 K/4000 K/5700 K/ 6500 K (As per ANSI Bin), 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI>80, R9>20, THD<10%, P.F>0.95, Driver Efficiency>85%, SDCM<3, electronic control gear, direct light emission, sheet metal CRCA housing, polyester white powder coat applied over a 5-stage pre-treatment, Prismatic diffuser for glare-free uniform light distribution, UGR<19, Protection class I, IP40, surge protection of 2.5kV, L = 1195mm, B = 295mm, H = 70mm & conforming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest at Tech Spec-I attached & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') at Tech Spec-II attached or latest & as per explanatory note | — | — | — | 7,98,000 | |
| — | 480.00 | — | — | ||
| Design, Supply, Fixing, testing and commissioning of Deep Recessed downlight luminaire Blaire with HPE (High-Performance Efficiency) LED (Light Emitting Diode) system power: 15 W, Luminous flux of luminaire 1650 lm, 110 Lm/w, Colour temperature of 3000 K/4000 K/5700 K/ 6500 K (As per ANSI Bin) CRI > 80, R9>20, THD<10%, P.F>0.95, Driver Efficiency>85%, SDCM<3, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser for homogenous light distribution, UGR<19, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear, Protection class II, IP 20 Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm. & confirming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest at Tech Spec-I attached & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') at Tech Spec-II attached or latest & as per explanatory note. | — | — | — | 8,88,000 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing & commissioning of inline fan size 10" dia. complete conforming to latest relevant IS/IEC standards as per site Requirement & as per explanatory note. | — | — | — | 1,63,050 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing & commissioning of inline fan size 8" dia. complete conforming to latest relevant IS/IEC standards as per site requirement & as per explanatory note. | — | — | — | 90,380 | |
| — | 700.00 | — | — | ||
| Supply of PVC insulated flexible Copper cable 3C x 2.5 sq mm complete as per latest IS and IE rules & as per explanatory note. | — | — | — | 72,100 | |
| — | 400.00 | — | — | ||
| Supply, installation, testing & commissioning of uPVC pipe, complete with fittings, supports, U-trap arrangement, Clean Plug and accessories for AHU/IDU as per site requirement & as per explanatory note. 32 mm dia ( with 9 mm Nitrile) | — | — | — | 87,200 | |
| — | 5.00 | — | — | ||
| Supplying & fixing powder coated extruded aluminium supply Air grills with aluminium volume control dampers as per specification & as per explanatory note. | — | — | — | 48,115 | |
| — | 550.00 | — | — | ||
| Fabrication of MS stand/cabinets or any other MS structure of approved drawing for precooling points/battery charger/ covering of electrical structure. The work includes cutting, welding , riveting, nut bolts of the MS structure including applying a primary coat of steel primer and one coat of paint of approved shade & as per explanatory note. | — | — | — | 64,350 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing & commissioning of Pop up Box of conference hall table including installation kit 2 switch 6 A and 2 socket 6 A and 1 RJ 11 and 1 RJ 4S as per site requirement conforming to latest IS & IEC rules & as per explanatory note. | — | — | — | 23,000 | |
| — | 20.00 | — | — | ||
| Provision of 190 Liter 5 star frost free single door 190 liters Refrigerator conforming to IS 17550 or latest & as per explanatory note. | — | — | — | 3,21,140 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NewSpecialConditions-BH.pdf
ATTACHMENT
ExplanatoryNote-BH.pdf
ATTACHMENT
TenderDocument-BH.pdf
ATTACHMENT
GCC-2022-ACS10_merged.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo.11.pdf GCC ACS No 11
ATTACHMENT
TECHSPEC-I.pdf
ATTACHMENT
TECHSPEC-II.pdf
ATTACHMENT
TECHSPEC-IIIAC.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo.11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .