Provn of certain sanctioned E/M works at Kapurthala Mil Stn under GE Kapurthala

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out including trimming of sides complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus spoil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.

Material and labour for brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable all as specified and directed.

Supply, laying jointing and testing under ground XLPE armoured cable insulated and PVC seathed LT 1100 volt grade (heavy duty) with stranded aluminum conductor of size 50 Sqm 3.5 core confirming to IS laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed by the Engineer-in-Charge.

(i) M&L for High mast steel tubuler structure 15 metre long with Grade S-355 as per BS EN 10025 for shaft and gussets and grade FE-410 WA as per IS-2062 for 9 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, LED dome aviation obstruction light with LED lamp, lightning arrester spike flange and door stiffness construction in two section longitudinal and welded in one section with thickness of sheet 3mm top and 4mm bottom and final including necessary excavation returning filling removal of soil from site all and PCC/RCC foundation of high mast light as per manufacturer design as spcified and comprising the following dimensions with the following accessories :- (Make :- Bajaj electrical Ltd/Philips/Crompton Greavers

(a) Length of bottom section - 8.250 Mtrs (b) Length of top section -8.250 Mtrs (c) Base dia - 360 mm (approx) (d) Top dia -150 mm (approx) (e) Size of opening and door at base -1200x250 (close fitting door with suitable reinforcement to avoid Buckling at base of mast) (f)Lighting protection finial -G. single spike of length 1200 mm (g) Foundation depth - 1.5 Mtr below G.I (h) Nos of foundation bolts-08 Nos (i) PCD of foundation bolts - 460 mm (j) Diameter of foundation bolts - 30 mm (k) Length of foundation bolts - 850 mm

(ii) size of base plate 520mm thick 25 mm dia complete all as specfied each set-01 Nos

(iii) Lantern Carriage:- Lantern carriage ring with class BMS pipe/tube having sleeve on carriage ring 535 mm (ID) dia suitable to mount 09 Nos of lentern fitting symetrically -01 Nos.

(iv) Winch :- Winch double drum type having operating speed 180 RPM and gear ratio 53 : 1 working operating manually/electrically with stainless steel wire rope 6mm dia too point suspension system including timble copper Talurit capacity 500 Kgs (per Drum) make lubrication arrangement self lubricant in permanent oil both bath type SAE-90/140 or equivalent each Job -01 No.

(v) Stainless steel wire rope:- Diameter of SS rope 6 mm, AISI 304 grade, construction of SS rope 7/19 , stainless steel of centre core material DIN 3060, 3 Nos rope of 6 mm for Lantern Carriage, 2 Nos of 6 mm for Double drum Winch, breaking load capcity of SS wire rope are 2350 Kgs per SS rope.

(vi) Trailing Cable :- Copper conductor cable PVC sheathed 1100 volt grade of size 4.00 Sq mm PVC insulataed from electrical box to street light fittings separately for nine fittings each Job -01 No.

(vii) Push button control 415 Volt 3 phase 50HZ 1440 RPM single speed 1100 watt torque lifting capacity 750 Kgs adjustable mechanically tripping device complete all as specified.

(viii) Power Tool:_ 1 HP integral model, single speed, reversible 415 volts/240 Volts with mechanical tripping facility.

M & L for earthing with galvanized iron earth plate electrode 600mm x 600mm, 6mm thick buried directly in ground vertically in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI strip 32x6mm by means of GI bolts, nuts, check nuts and washers (earth plate covered with alternate layers of charcoal dust and common salt 15cm thick), GI strip 32x6mm protected by GI pipe medium grade 40 mm dia upto switch board and connected to main switch board including provision of GI pipe 20 mm dia medium grade watering pipe with funnel and wire mesh, all as shown in Electrical Plate No. 3 of SSR Part-I, including PCC chamber (1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed by Engineer-in-charge

Supply and fixing LED flood light fitting 170 watt for high mast with prssure die cast housing IP 66 protection, Efficient high output emitter LED for better distribution including clamp on bracket suitable for fixing of LED flood light fitting including necessary connection complete all as directed by Engr-in-Charge. Make Crompton/ Bajab/ Havells.

Supply,install test and comprising of factory made powder coated cubical outdoor LT feeder pillar box of size 900 x 750 x 300 mm confirming to IP-65, CPRI approved complete weather proof and vermin proof and the shell of 3.15 mm thick MS sheet with partitions and switch enclosure doors of 2 mm MS sheet with minimum clearance of 750 mm and canopy made out of 3.15 mm thick MS sheet all as per IS shall be available inside for easy access and working condition fixed on angle iron frame 50 x 50 x 6mm. Mounted on brick masonry pillars with a clearance of atleast 0.45 mtrs above GL on 100mm thick appron of PCC 1;4;8 type D-2 provided 1.0 mtr all around with a slight outward slope to avoid stagnation of water, marking to indentify incoming and outgoing circuits and earthing pillar box at two points out door feeder pillar box comprising of following :-

(a) MCCB 63 Amp,4 pole 25 KA ,415 volt ICU 100% ICS with thermal based release = 02 Nos (01 Incomer, 01 spare) (b) Timer switch Analog outdoor type factory made powder coated all along internal and external surfaces, weather proof, dust and water proof with I P 55 protection, consisting of 01 No AC contactor 3 pahse 16 Amp capacity 10 KA, one digital Timer switch with 16 Amp three Nos MCB SP 10 Amp 10 KA having both auto manual and by pass system - 01 No mounted on existing panel with suitbale size clamps complete all as specified and directed. Make : Indoasian Model Time lite 16 Amp 3 pole Cat Part No TLO16ABO or equivalent CAT Part of make Scheneider/Legrand/ Standard/Havell's.(c) Reversing starter Capacity 2 HP/1.5 KW with contractor size 18, overload relay range 2.5-4 Amp Cat part No IHPREVHB* of Make Havells or equivalent in L&T/Standard

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate for fdn of poles, stay etc.

Supply & fixing GI pipe light grade 80 mm bore for cable protection fixed to pole/along wall/floor/under road etc complete all as specified and directed. Note : Clamps nuts & bolts etc shall be measured and paid for separately under appropriate items of sch 'A'

Supply , install , commissioning and testing Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 01 TR

Supply , install , commissioning and testing Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR

Supply , install , commissioning and testing Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2.of capacity 02 TR

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enlosure single pole and neutral with two pin socket and earth plug complete with one MCB single pole 240 volts 20 amps complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of 6.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.)

Supply & installed Voltage stabilizer for automation operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of + 2.5% and capacity 5 KVA.

Supply & installed Voltage stabilizer for automation operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of + 2.5% and capacity 3 KVA.

S & F in Repair sheet metal enclosure for MCB DB single door single pole & Neutral 4 way with 200 Amps rated bus bar Make ; Legrand/L&T /Havells/C & S Electrical

S & F in Repair sheet metal enclosure for MCB DB single door single pole & Neutral 8 way with 200 Amps rated bus bar.Make ; Legrand/L&T /Havells/C & S Electrical

S&F MCB, 20 to 32 Amp, SP, 240 Volt Make : Indoasian/Legrand /Schneider/Siemens/C&S

S&F MCB, 40 to 63 Amp, SPN, 240 Volt Make : Indoasian/Legrand /Schneider/Siemens/C&S

Supply & fixing energy saving LED street light 60 watt with PDC aluminium body and toughened glass visor fitted in frame, secondery optical lens for superior light distribution efficiency>90 Lm/W with CCT 5700K, IP 65 Make Havells Cat part No EDURAPEARLNEOSL60WLED 75PASYTOPC complete with 3 core 2.5 sqmm PVC insulated aluminium cable including suitable size of GI pipe 1.50 Mtr long with 02 No's clamp for fixing of GI pipe on pole complete all as specified and directed by Engr-in-Charge. Make: Bajaj electrical Ltd/Philips/Crompton Greavers/Havells

Supply & fixing Timelite Distribution board 40 Amps 230 V analog time switch Cat part No TLO40ABO and Timelite DB Cat part No TA926453 of make IndoAsian Make: IndoAsian/HANSAL/Havells

Supply and lay cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core.

Supply and install in replacement of steel tubular swaged poles type 410 SP-37 (9.0 mtr long) complete with CI base plate and finial taper plug,bolts, nuts and screws as specified all as directed by Engr-in-Charge. Note :- Excavation, earth & PCC work only will be measured separetely all other accessories and work deemed to be included in quoted rates.

M&L for PCC 1:2:4 type B1 using 20 mm graded for padestal coping incl necessary formwork finished fair using extra cement.

Supply and laying 50 mm dia GI tubing light grade complete with all fittings (ISI Marked) lain in trenches/fixed complete to wall and ceiling or laid in floors

Supply & Fix junction box factory made weather proof size 250mmx200mmx100mm made of 16 gaugesteel sheet powder coated inculded 25mmx6mm aluminium TPN bus bars & 01 MCB 2.5 Amps complete all as specifed & directred

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

ARR CONSTRUCTIONS

KULDEEP SINGH

DUGGAL CONSTRUCTION CO

J.K & Company

UNITED ENGINEERING CORPORATION

KAMAL AGGARWAL

M/S BALWINDER SINGH