Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC | ₹1.2 L | L1 | Accepted-AOC ACCEPTED |
| 2 | L2₹1.5 L+₹30,670 (25.2%)Rejected-Finance | ₹1.5 L+₹30,670 (25.2%) | L2 | Rejected-Finance satisffied |
Tender Value
₹20 L
EMD Value
₹20,000
Closing Date
20 Oct 2023, 3:00 pmClosed
Commissioner, Tambaram Corporation
no,1. Muthurangam Street, West Tambaram, Ch-45
Repair and Maintance of Mini Power Pump and Hand Pump in Ward No 55, 56, 57 and 58 in Zone-4
2023_MAWS_379778_6
138/2023/e1(z4)
Open Tender
Maintenance Works
Works
365 days
TCMC Zone 4
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹20,000
Yes
10 Dec 2024
17 Oct 2023
20 Oct 2023
17 Oct 2023
20 Oct 2023
17 Oct 2023
Amount
Attending repairs to the submersible pumpset including cost and conveyance of all materials, and all other labour charges etc.complete
Removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs including all labour charges etc complete as per standard specification.
Re-erection of centrifugal pumpsets, jet pumpsets and its accessories into the borewell/ openwell after attending the repairs including all labour charges etc complete as per standard specification.
Rewinding of burnt of submersible pump set the work including removal of materials to be deducted including the cost of winding wires, sleeves, connection wires and other requirement (guarantee period for six months form completion of work
1.00HP to 1.50HP Submersible Motor
2.00HP to 3HP submersible Motor
Supply of the follwing spare parts each for attending repairs to the submersible pumpset including cost and conveyance of all materials, and all other labour charges etc.complete
Motor Top bearing houshing
Motor Top bearing bush
Motor Top bearing Sleeve
Motor bottom bearing housing
Motor bottom bearing Sleeve
Carbon segment
Carbon segment Top disc.
Trust bearing Top
Trust bearing bottom
Pump Top bearing bush
Pump Top bearing Sleeve
Pump Top Bearing Housing
Impeller (G.M)
Pump Bowl (C.I)
Impeller Bush G.M
Impeller Bush S.S
Motor Upper bearing
Motor Lower bearing
Pump bowl ring
Upper Sleeve for Oil seal
Lower Sleeve for Oil seal
Transporting charges for the pumpset
Servicing Commissioning and Testing of submersible Pumpset
supply and delivery of follwing PVC insulated and sheathed 3core flat type copper cable conforming to IS 694/1990 including all the cost and conveyance of materials etc complete
1.50Sq.mm Cable
2.50Sq.mm Cable
7/16 PVC Copper Wire
32 Amps Fuse Unit
63 Amps Fuse Unit
Supply and delivery of following PVC,HDPE,GI pipes and specials etc completed
Nylon Rope
32mm dia GI Pipe
65mm dia GI Pipe
2" dia GI coupling
Starter Oil
Contact Point Kit
No Volt Coil
Service to 1HP starter
Service to 1.50HP oil Starter
Service to 2HP to 3HP oil Starter
Condenser Stating
Condenser Running
Supply delivery and fixing of single phase panel Board with two level guard with Auto start for single phase submersible pumpset inlcuding cost and conveyance of material and labour charges etc., complete as per standard specification
1HP Auto Start
1.50HP Auto Start
2HP Auto Start
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
500 litres
1000 litres
2000 litres
Removal of deep well handpumps for borewells inclusive of removal of G.I pipes,plunger rods ,cylinder etc complete
Up to 40m
Above 30 M
Attending repairs to deep well handpumps for borewells inclusive of removal of G.I pipes,plunger rods ,cylinder and re-erection of hand pumps inclusive of lowering the G.i pipes Plunger rods cylinder,jointing etc complete
Up to 30m
Above 30 M
Attending the repairs to the public fountain in various places of municipal limit including cost and conveyance of material and labour charges for earth work excavation, replaced rust GI pipe and providing new GI Pipe and specials to making the original condition etc., as per directed by department officers
Major Repair
Minor Repair
Supply, delivery and fixing of GI, PVC Pipe and Speciles including cost and conveyances of all charges etc completed as per standard specifications
15mm dia PVC Tap
20mm dia PVC Tap
15mm dia GI Tap
20mm dia GI Tap
Construction of brick work pedestal for HDPE Tank using country bricks in cm 1:5 mix,size of 1.50mx1.50x1.40m height ,including necessary earth work filling sand, PCC 1:4:8 using 40mm HBG metal,plastering with cement mortar 1;5 mix to 12mm thick and painting two coats over one coat of white washing fixing HDPE Tank boxover the pedestal etc completed as per standard specification
JD ELECTRICAL WORKS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .