JBP/1/K/MUS/TEND/2025-26C-II

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should ave Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. (With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100 specifications )

1.5 sqmm Copper Wire

2.5 sqmm Copper wire

PVC conduit pipe 25 mm

cPVC pipe 25 mm

Junctiopn Box (2/4 way)

Elbow

Reducer (40 mm to 20 mm)

PVC cement solvent

Bending Spring

Flexible Pipe

LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt ) (12-15 watt)

LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt ) (18 watt)

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) (40 Watt)

Electric Panel Board

Electric Plate

Switches (6 Amp)

Switches (16 Amp)

3 pin Socket 5/6 A

6 pin Socket 15/16 A

8 way, SPN, double door, MCB DB

Iron screws, 35 mm X 6 mm

PVC clip for fixing cable

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.

Stainless steel Valve Connector for 28.58 mm outer dia X 25 mm nominal dia threaded

Fiber Glass 50 cm x 50 cm in ventilators with ruber casket and fabrication charges

Please Enable Macros to View BoQ information