Loading…
Loading…
Tender Value
₹8.3 Cr
EMD Value
₹16.6 L
Closing Date
2 Sept 2026, 3:00 pm
Yes (up to 3 members)
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Station Development
Above/Below/Par
GATISHAKTI
30 conditions · 2 needing a document upload
The tenderer must have a minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case the balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure specified in Tender Document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Standard technical criteria are as follows:
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
Three similar works, each costing not less than the amount equal to 30% of advertised value of the tender, Or
Two similar works, each costing not less than the amount equal to 40% of advertised value of the tender, Or
One similar work costing not less than the amount equal to 60% of advertised value of the tender.
In case of composite works, tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
Three similar works, each costing not less than the amount equal to 30% of advertised value of each component of tender, Or
Two similar works, each costing not less than the amount equal to 40% of advertised value of each component of tender, Or
One similar work costing not less than the amount equal to 60% of advertised value of each component of tender.
Note for (1.2): Separate completed works of minimum required values 1.2.4 shall also be considered for fulfillment of technical eligibility criteria for different components.
Note: (a)The 'work' includes subletted works also, if awarded to subleting contractor with the approval of main client. The work experience certificate of subletted work should be issued by the main client only, to be eligible for consideration. To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised,legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. (b)Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been 1.3.1 made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials.
If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials.
In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the 1.5.1 completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work.
If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 1.2.4 & 1.3, the same shall be considered for the purpose of fulfillment of credentials
In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility.
Definition Of Similar Work : - Any Civil Engineering Work
76 conditions · 13 needing a document upload
" No post tender correspondence will be done with the participant tenderer(s) for deficient credentials noted during scrutiny of tender/offer nor any credential will be accepted after opening of the tender and the offer shall be decided on the basis of submitted/Credentials downloaded with offer only"
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society/HUF etc. shall be neither asked nor considered, if submitted.Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted
The tenderer/s shall submit a duly filled Tender form as per "ANNEXURE-I" OF STANDARD TENDER DOCUMENT"
BID Security (Bank Guarantee Bond from)-Annexure-VI A, The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted a longwith bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure V , in case of other than Company/Proprietary firm, Annexure-V shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above Certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
The following documents should be specified for submission along with tender:
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work.
B. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
C. The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
D. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
Bid Security: (a)Subject to exemptions provided under para 4(iv)) of this document, the tender must be accompanied by a Bid Security as mentioned in tender documents, failing which the tender shall be summarily rejected. (b)The Tenderer(s) shall keep the offer open for a minimum period of 60 days (in case of two packet system of tendering 90days) from the date of closing of the Tender. It is understood that the tender documents have been issued to the Tenderer(s) and the Tenderer(s), is / are permitted to tender in consideration of the stipulation on his / their part that after submitting his / Their tender subject to the period being extended further, if required by mutual agreement from time to time, he will not resile from his offer or modify the terms and conditions thereof in a manner not acceptable to North East Frontier Railway. Should the tenderer fail to observe or comply with the foregoing stipulation, the amount deposited or Bank guarantee bond submitted as Bid Security for the due performance of the above stipulation, shall be forfeited to the Railway. (c)If his tender is accepted, (i)the Bid Security mentioned in sub para(a) above deposited in cash through e- payment gateway will be retained as part security for the due and faithful fulfillment of the contract in terms of Clause 16 of the Standard General Conditions of Contract; (ii)the Bid Security mentioned in sub para(a) above submitted as Bank guarantee bond, will be encashed as part security for the due and faithful fulfillment of the contract in terms of Clause 16 of the Standard General Conditions of Contract. The Bid Security of other Tenderers shall, save as herein before provided, be returned to them, but the Railway shall not be responsible for any loss or depreciation to the Bid Security that may happen thereto while in their possession, nor be liable to pay interest thereon. (d)In case Contractor submits the Term Deposit Receipt/Bank Guarantee Bond towards either the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security so retained as per sub para(c) above, to the Contractor.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please provide your bank details to facilitate payment through ECS.
Please give full details of the Constitution of the Firm/JV/Company/Society etc. and also submit relevant documents as applicable, by uploading the relevant documents in accordance with clause 2.2.6 of Instructions to Tenderers. Non-submission of these documents shall render the offer liable to be rejected.
Provision of new station building at MZS, SPTR & DMC under ABSS.
CPM-GS-MLG-TSK-2026-03~NFR
CPM-GS-MLG-TSK-2026-03
Special Limited
Works - General
3 Months
Kamrup, Assam
₹0
₹16.6 L
12 Aug 2026
12 Aug 2026
19 Aug 2026
112 items across 4 schedules · ₹5,73,57,474.45 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 240 | 260.3 | 62,472 |
| 2 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 235 | 7,780.3 | 18,28,370.5 |
| 3 | Foundations, footings, bases for columns | Sqm | 820 | 392.15 | 3,21,563 |
| 4 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 105 | 392.15 | 41,175.75 |
| 5 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 945 | 927.25 | 8,76,251.25 |
| 6 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 1125 | 736.4 | 8,28,450 |
| 7 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1230 | 961.3 | 11,82,399 |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 8300 | 107.85 | 8,95,155 |
| 9 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 35700 | 107.85 | 38,50,245 |
| 10 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 78 | 9,504.75 | 7,41,370.5 |
| 11 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 298 | 9,860.4 | 29,38,399.2 |
| 12 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 138 | 733.5 | 1,01,223 |
| 13 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 675 | 7,370.65 | 49,75,188.75 |
| 14 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 108 | 9,344.35 | 10,09,189.8 |
| 15 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 480 | 1,123.8 | 5,39,424 |
| 16 | Area of slab upto 0.50 sqm | Sqm | 90 | 5,413.5 | 4,87,215 |
| 17 | Area of slab over 0.50 sqm | Sqm | 60 | 5,136.3 | 3,08,178 |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 255 | 1,267.95 | 3,23,327.25 |
| 19 | 18 mm thick | Sqm | 12 | 1,020.95 | 12,251.4 |
| 20 | 25 mm dia | Metre | 90 | 525.55 | 47,299.5 |
| 21 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 72 | 228.85 | 16,477.2 |
| 22 | 300x16 mm | Each | 432 | 216.55 | 93,549.6 |
| 23 | 250x10 mm | Each | 60 | 441.6 | 26,496 |
| 24 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 6 | 854.65 | 5,127.9 |
| 25 | 50 mm | Each | 6 | 356.75 | 2,140.5 |
| 26 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 36 | 121.65 | 4,379.4 |
| 27 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 36 | 1,124.85 | 40,494.6 |
| 28 | 200x10 mm | Each | 36 | 99.7 | 3,589.2 |
| 29 | 1.0 mm thick | Sqm | 84 | 897.3 | 75,373.2 |
| 30 | With decorative veneering on one side and commercial veneering on other side | Sqm | 36 | 1,927.5 | 69,390 |
| 31 | Providing and fixing aluminium U beading of required size to Pre-laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge. | Kg | 45 | 596.15 | 26,826.75 |
| 32 | 125 mm | Each | 36 | 119.2 | 4,291.2 |
| 33 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 2550 | 117.35 | 2,99,242.5 |
| 34 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1950 | 133.7 | 2,60,715 |
| 35 | Hot finished seamless type tubes | Kg | 20700 | 206.35 | 42,71,445 |
| 36 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 460 | 8,595.15 | 39,53,769 |
| 37 | Light shade pigment using white cement | Sqm | 114 | 1,402 | 1,59,828 |
| 38 | Size of Tile 1200 x 1200 mm | Sqm | 1140 | 2,838.5 | 32,35,890 |
| 39 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 1070 | 738.65 | 7,90,355.5 |
| 40 | Ridges plain (500 - 600mm) | Metre | 139 | 532.35 | 73,996.65 |
| 41 | Gutter (600 mm over all girth) | Metre | 70 | 1,313.7 | 91,959 |
| 42 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | Sqm | 950 | 2,215.15 | 21,04,392.5 |
| 43 | 1:4 (1 cement: 4 fine sand) | Sqm | 294 | 425.55 | 1,25,111.7 |
| 44 | 1:4 (1 cement: 4 fine sand) | Sqm | 294 | 477.9 | 1,40,502.6 |
| 45 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 2750 | 262.7 | 7,22,425 |
| 46 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 2550 | 185.65 | 4,73,407.5 |
| 47 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 2170 | 116.9 | 2,53,673 |
| 48 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 4950 | 193.7 | 9,58,815 |
| 49 | 90 mm to 45 mm size stone aggregate | cum | 1620 | 2,098.4 | 33,99,408 |
| 50 | 63 mm to 45 mm size stone aggregate | cum | 1620 | 1,636.05 | 26,50,401 |
| 51 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 3600 | 972 | 34,99,200 |
| 52 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 255 | 2,017.6 | 5,14,488 |
| 53 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 12 | 6,258.75 | 75,105 |
| 54 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Each | 6 | 9,256.45 | 55,538.7 |
| 55 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 18 | 3,960.55 | 71,289.9 |
| 56 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. | Each | 6 | 142.85 | 857.1 |
| 57 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 12 | 6,940.75 | 83,289 |
| 58 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 24 | 14,999.15 | 3,59,979.6 |
| 59 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 90 | 272 | 24,480 |
| 60 | PN - 16 Pipe, 40mm OD (SDR-7.4) | Metre | 90 | 545.75 | 49,117.5 |
| 61 | PN - 16 Pipe, 40 mm OD (SDR-7.4) | Metre | 240 | 415.1 | 99,624 |
| 62 | PN - 10 Pipe, 110 mm OD (SDR-11) | Metre | 120 | 1,301.35 | 1,56,162 |
| 63 | PN - 10 Pipe, 160 mm OD (SDR-11) | Metre | 150 | 2,746.85 | 4,12,027.5 |
| 64 | 15 mm nominal dia Pipes | Metre | 120 | 497.8 | 59,736 |
| 65 | 20 mm nominal dia Pipes | Metre | 90 | 537.6 | 48,384 |
| 66 | 25 mm nominal dia Pipes | Metre | 60 | 627.25 | 37,635 |
| 67 | 25 mm nominal dia Pipes | Metre | 180 | 355.4 | 63,972 |
| 68 | 40 mm nominal dia Pipes | Metre | 120 | 563.05 | 67,566 |
| 69 | 150 mm diameter | Each | 12 | 222.35 | 2,668.2 |
| 70 | 15mm nominal bore | Each | 6 | 574.3 | 3,445.8 |
| 71 | 15 mm nominal bore, 165 mm long, weighing not less than 110 gms | Each | 27 | 176.85 | 4,774.95 |
| 72 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc. to paid separately) | Sqm | 90 | 5,325.9 | 4,79,331 |
| 73 | Erection of GFRG Panels in walls in all floors using suitable crane as per instructions of Engineer-in-Charge, as per cutting drawings and structural drawings, in perfect line and plumb, above RCC plinth beam/ GFRG panel below and provide necessary lateral/ slanting support to keep the wall panel in safe position, providing & tieing of Reinforcement as per structural drawings and applying a coat of water repellent coating Zycosil/ equivalent or equivalent product (1 Zycosil/equivalent compound:10 water ) to saturation level over RCC plinth beam to provide water proofing treatment to joint between wall panel & plinth beam as per the guide lines / instruction by the engineer in charge. (Cost of reinforcement, water proofing of walls and plinth beam/ GFRG panel below joints and installation of door/ window frames before filling of concrete shall be paid separately). The rate quoted shall include making provision for laying of lintels, beams, sunshades, staircase beams, lofts, plumbing work, electrical conduits and any structural insertion etc., as per the drawing and direction of the engineer in charge. The payment shall be made based on the actual exposed area (one side only) of the panel. The work shall be carried out as per the Special Conditions For Glass Fibre Reinforced Gypsum (GFRG) Structures mentioned in NIT. | Sqm | 405 | 283.25 | 1,14,716.25 |
| 74 | After erection of GFRG wall panels, seal all GFRG wall joints with paper tape temporarily. Water proofing treatment of vertical joints with Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) with 50 ml syringe till the gap and in filled concrete is completely saturated. After removing the paper seal, seal off the vertical joints with water proofing material "Grout RW/equivalent" (Sealing cost excluded.) | Metre | 90 | 92.45 | 8,320.5 |
| 75 | Frame size 45 x 85 mm | Metre | 270 | 926.35 | 2,50,114.5 |
| 76 | 35 mm thick | Sqm | 219 | 5,015.35 | 10,98,361.65 |
| 77 | Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. | Sqm | 360 | 3,437.15 | 12,37,374 |
| Schedule total | ₹5,45,80,178.55 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
MZS-SPTRDMCunderABSS-Copy.pdf
ATTACHMENT
GCCAPRIL2022_ACS10_UPDATED1.pdf GCC 2022 updated upto CS 10
ATTACHMENT
ACS11GCC_compressed.pdf
ATTACHMENT
GCCAPRIL2022_ACS10_UPDATED1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].