COMPREHENSIVE MAINT OF INTERNAL ELECTRIFICATION, CEILINGFAN, EXHAUST FAN, RE-WIRING AND ALLIED WORKS AT ZONE I AND II OF Y STN, 166 MH AND RAIPUR SATWARI UNDER GE SATWARI

Amount

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for foundation of poles, stay assembly and laying of LT/HT cable as in any type of soil and getting out, complete all as specified and directed.

Returning, filling in, including spreading,leveling watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil.

Removal of surplus excavated material hard/dense soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L Clear dry and sharp sand as in cushioning layer over and under cable laid in trenches complete all as specified and directed.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid.

"Receiving/recording complaints lodged by occupants of area 166 MH and Raipur Satwari under GE Satwari of internal electrification nature, rectification of the fault as per the complaint lodged by the user or as given by MES onward KWH meter in respect of main distribution board having switch fuses, MCB distribution board in sheet metal enclosure, point wiring, fixture for light/ Fan/bell/light or power sockets complete repairs to the extent by removing connections from the system, removing faults in wires, batten, conduit, sunk boxes, junction boxes, main switches, MCBs/DBs utility light fittings, FTL light fitting any wattage lamp, holders, AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tape, screws, nuts as required to rectify the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engineer-in-Charge/users.

NOTE: (i) The new items provided shall be measured and paid for separately under relevant items of Sch ‘A’. (ii) Rate of Other items like screws, nuts, insulation tape, copper wire of diferent size upto 01 mtr length, Modular sheet cover etc are covered under Item No. 1 (iii) If contractor fails to attend the complaints a penal recovery as mentioned in Sch'A' Notes shall be recovered from contractor.

Supply only switch piano flush button single pole one way, 6 Amps, 240 V complete all as specified and directed.Make : Anchor cat No. 14121 or equivalent in list of makes.

Supply only switch piano flush button single pole two way 6 Amps, 240 V complete all as specified and directed. Make: Anchor Cat No. 14122 or equivalent in list of makes.

Supply only bell push piano flush type 6 amps , 240 V complete all as specified and directed. Make: Anchor Cat No. 14123 or equivalent in list of makes.

Supply only buzzer door bell, AC 230 volts Single Phase complete all as specified and directed. Make Anchor cat No. 8374 or equivalent in list of makes.

Supply only socket outlet 2-in-1 5 pin, 6 Amps flush type complete all as specified and as directed. Make: Anchor Cat No. 14119 or equivalent in list of makes.

Supply only Switch socket combination 2-in-1 5 pin 6 Amps flush type complete all as specified and directed. Make : Havells Cat No. AHETOXW062 or equivalent in list of makes.

Supply only Switch piano flush button single pole one way, 20 Amps, 230/240 V complete all as specified and directed Make : Anchor Cat No. 14401 or equivalent in list of makes.

Supply only Socket outlet 2-in-1 5 pin, 10 & 20 Amps flush type complete all as specified and directed. Make : Havells Cat No. AHETOX204 or equivalent in list of makes.

Supply only Switch socket combination 5 in 1, 10A and 20 Amps flush type universal controlled by one switch complete all as specified and directed. Make: Anchor Cat No. 39998 or equivalent in list of makes.

Supply only Fan regulator socket type stepped type (electronic ) for 1200/1400mm sweep AC ceiling fan complete all as specified and directed. Make: Anchor Cat No. 38660 or equivalent in list of makes.

Supply only single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16 Amps 240 volts complete all as specified and directed.Make: Anchor cat No. 98003 or equivalent in list of makes.

Supply only MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make: Anchor Cat No. 98001 to 98006 or equivalent in list of makes.

Supply only MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, Complete all as specified and directed. Make: Anchor Cat No. 98014 or equivalent in list of makes.

Supply only MCB SPN 40 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make: Anchor Cat No. 98015 or equivalent in list of makes.

Supply only MCB SPN 25 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. . Make: Anchor Cat No. BBD2251CHH or equivalent in list of makes.

Supply only MCB SPN 63 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make: Anchor Cat No. 98016 or equivalent in list of makes.

Supply only MCB 3 pole complete 63 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make :Make: Anchor Cat No. 98032 or equivalent in list of makes.

Supply only MCB TPN complete 63 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make :Make: Anchor Cat No. 98040 or equivalent in list of makes.

Supply only 8'' x 5'' size Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size steel screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed.

Description all as per Srl item No 26 here in before but of size 5'' x 5''.

Description all as per Srl item No 26 here in before but of size 12'' x 10''.

Supply only Laminated sheet cover hylam brand ISI marked 3mm thick round sheet for fixing on junction boxes as required at site incl suitable size screws - 01 Nos complete all as specified and directed.

Supply only LED tube light Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8/T12 luminaire, 20 watt LED wattage with colour temp of 6000K 1800 lumens and with surge arrestor complete in all respect suitable for installation in existing T8 tubelight with G13 lamp holders to give glare free light 18 watt. Make : Model LHEXCEP7UN1W020 of Havells or Cat part NO LTT 8-20 of Crompton or LL13-181-650 of Wipro.

Supply only LED tube light fitting with aluminium heat sink and polycarbonate diffuser with high efficacy suitable for installation in existing T5 tube light with G5 lamp holders to give glare free light 18 watt along with LED driver. Make : Crompton cat part No LT5RT1-18-CDL or equivalent in list of makes.

Supply only LED rectangular light 10 watt 6500 K with B22 base complete all as specified and directed. Make : Wipro cat part No N11011 or equivalent in list of makes.

Supply only modular type switch, one way 6 Amps , 1 module complete all as specified and directed. Make: As per existing

Supply only modular type socket 5 pin, 6 Amps combined 2 module complete all as specified and directed. Make: As per existing

Supply only modular type socket 5 pin, 6 /16 Amps combined 2 module complete all as specified and directed. Make: As per existing

Supply only modular type switch, one way 16 Amps, 1 module complete all as specified and directed. Make: As per existing

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good disturbed surface of walls and roofs complete all as specified and directed.

M&L for One light/fan point controlled by one, one way switch 6 Amp complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm multistranded copper conductor FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into GI/pressed steel modular terminal boxes including modular switch cover IS marked for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed.

Description all as per Srl item No 38 here in before but for One 3 pin modular socket outlet 6 amp independent

Description all as per Srl item No 38 here in before but for One 3 pin modular socket outlet 6 amp on same board

Description all as per Srl item No 38 here in before but for One 3 pin 6 Amps modular socket outlet independent but below the switch board of light points in the same vertical plane,

Description all as per Srl item No 38 here in before but for One bell/ buzzer point controlled by one, complete all as specified and directed.

Description all as per Srl item No 38 here in before but for one 2 way light point controlled by two 2 way switch

Description all as per Srl item No 38 here in before but for one 3 pin modular socket outlet 15/16 Amps independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

S&F switch modular one way 06 Amp,1 module all as specified and directed. Make: Legrand Cat No. 5734 00 or equivalent in list of makes.

S&F switch modular one way 20 Amp,1 module all as specified and directed. Make: Legrand Cat No. 5734 10 or equivalent in list of makes.

S&F Modular socket 6A-2/3 Pin 2 module 230V AC all as specified and directed. Make: Legrand Cat No. 5734 70 or equivalent in list of makes.

S&F Modular socket 6A/16A-3 Pin 2 module 230V AC all as specified and directed. Make: Legrand Cat No. 5734 71 or equivalent in list of makes.

S&F modular bell push type one way 6 Amp 1 module all as specified and directed. Make: Legrand Cat No. 5734 13 or equivalent in list of makes.

S&F modular type fan regulator 2 Module all as specified and directed. Make: Legrand Cat No. 5734 69 or equivalent in list of makes.

M&L for One light/fan point controlled by one, one way switch 6 Amps complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm multi stranded copper conductor FRLS insulated drawn in existing concealed PVC/MS rigid conduit of any size terminated in exisitng CI/pressed steel terminal boxes including 3.00 mm thick hylam marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed.

Description all as per Srl item No 51 here in before but for One 3 pin socket outlet 6 amps independent

Description all as per Srl item No 51 here in before but for One 3 pin socket outlet 6 amps on same board

Description all as per Srl item No 51 here in before but for One bell/ buzzer point controlled by one complete all as specified and directed.

Description all as per Srl item No 51 here in before but for one 2 way light point controlled by two 2 way switch.

Description all as per Srl item No 51 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

S&F switch piano flush button polycarbonate single pole one way 6 Amps, 240 V. Make :Anchor cat No. 14121 or equivalent in list of makes.

S & F switch piano flush button polycarbonate single pole one way 16 Amps, 240 V. Make: Anchor cat No. 14307 or equivalent in list of makes.

S & F switch piano flush button polycarbonate single pole 2 way 6 Amps, 240 V. Make: Anchor Cat No. 14122 or equivalent in list of makes.

S & F bell push piano flush type polycarbonate 6 amps, 240 V. Make: Anchor Cat No. 14123 or equivalent in list of makes.

Supply and fixing bell Ding Dong AC 230 volts Single Phase all as specified and directed. Make: Anchor Penta or equivalent in list of makes.

S&F socket outlet 2-in-1 5 pin, 6 Amps flush type polycarbonate complete all as specified and directed. Make: Anchor Cat No. 14119 or equivalent in list of makes.

S&F socket outlet 2-in-1 5 pin, 10 & 20 Amps flush type polycarbonate complete all as specified and directed. Make: Anchor Cat No. 14307 or equivalent in list of makes.

Supply and fix Fan regulator socket type stepped type (electronic ) polycarbonate for AC ceiling fan all as specified and directed.. Make: Anchor Cat No. 14502 or equivalent in list of makes.

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing lamp holder, Polycarbonate type with back plate suitable for batten fittings incl LED bulb of capacity 9 Watt all as specified and as directed.

Supply and fixing LED tubelight fitting for 18-20 Watt LED, 230V, Batten type complete in all respect . Cat Part No DMLN1LT8-16 in Crompton or Cat Part No WIO921208 of Wipro, along with LED Tube Rod Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8-T12 luminaire, 18-20 watt LED wattage with colour temp of 6000K 1800 lumens and with surge arrestor complete in all respect Cat part NO LTT 8-20 of Crompton or LL13-181-650 of Wipro or equivalent in list of makes. Note : The LED batten and LED tube rod shall be of same make.

S&F LED wall mounted tube light fitting 10W complete Make Wipro cat part No LL20-111-XXX-65-NE or equivalent in list of makes.

S&F energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 or equivalent in list of makes.

S&F LED ceiling light fitting recess mounting 2'X2' white powder coated CRCA housing with LED's seamless front frame with flat white high transmission acrylic cover complete all as specified and directed. Make: Havells Cat No. PLUTONEO2X2PLR28WLED840S or equivalent in list of makes.

S&F MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, Complete all as specified and directed. Make: Anchor Cat No. 98014 or equivalent in list of makes.

S&F MCB SPN complete 40 Amp with rupturing capacity 10 KA 'C' series, Complete all as specified and directed. Make: Anchor Cat No. 98015 or equivalent in list of makes.

S&F MCB SPN complete 63 Amp with rupturing capacity 10 KA 'C' series, Complete all as specified and directed. . Make: Anchor Cat No. 98016 or equivalent in list of makes.

Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make: Anchor Cat No. 98001 to 98006 or equivalent in list of makes.

S&F MCB 4 pole complete 40 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make :Indo Asian Optipro oor equivalent in list of makes.

S&F in replacement of GI/Pressed steel terminal modular switch board with modular sheet cover of size 6/8 module with necessary electrical point wiring connection all as specified and directed.

S&F in replacement of GI/Pressed steel terminal modular switch board with modular sheet cover of size 3/4 module with necessary electrical point wiring connection all as specified and directed.

Supply and fixing down lighter fitting with LED light fitting 18 W LED 6000K, 230 V suitable for Recess mounted downlighter with pressure die-cast Al. heat sink & high brightness LED, with diffuser to give glare free light suitable for existing ceiling cutout Ø 160 mm complete all as specified and as directed. Make CG cat part No LSCRM-18W-CDL/NW/WW or equivalent in list of makes.

Supply and fixing down lighter fitting with LED light fitting 15 W LED 6000K, 230 V suitable for Recess mounted downlighter with pressure die-cast Al. heat sink & high brightness LED, with diffuser to give glare free light suitable for existing ceiling cutout Ø 160 mm complete all as specified and as directed. MakeCG cat part No LSCRM-15 W-CDL/NW/WW or equivalent in list of makes.

M&L for replacement of RCBO, double pole with sensitivity 100 mA of cap 63 Amp, having rupturing capacity 10 KA, 'C' series. Make: As per existing

S&F Vertical Distribution Board (TP&N) 4 way double door suitable for MCCB 3/4 pole of cap upto 125 Amp as incomer and out going MCBs SP and should be IP 43 protected with Copper Bus Bars, Neutral Links, Earthing bar all as specified and directed. Make: L&T Cat No. DBVTL004DD or equivalent in list of makes.

S&F MCCB three pole 100 Amp, 16 KA, 415 volts with adjustable thermal settings all as specified and directed. Note: TPN DB and MCCB should be of same make.

S&F Distribution Board (TP&N) 4 way fitted with Bus bars neutral links Blanking plates double door suitable for and including 4 pole Isolator as incomer and out going MCBs 4 ways complete all as specified and directed. Note:-(i) Rate includes Isolator four pole 63 Amp. (ii) TPN DB and Isolator should be of same make.

S&F Distribution Board (SPN) double door 12 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar all as specified and directed.

Description all as per Srl item No 83 here in before but for 8 Way double door

Description all as per Srl item No 83 here in before but for 4 Way double door

S&F distribution board single door two way without bus bar complete suitable for mounting MCB all as specified and directed.

S&F socket residual current device (SRCD) DBOXx in steel enclosure with MCB SPN 16 Amp and plug top 15/16 Amp complete all as specified and directed. Make Havells Cat No:DHDDCDP025201603 or equivalent in list of makes.

M&L point wiring with 4.0 Sqmm (Cross sectional area) single core PVC insulated unsheathed multistranded copper conductor FRLS in and including PVC concealed conduit and sunk type mild steel terminal switch box of any size for mounting of switches/sockets etc with 3mm thick plastic laminated sheet top cover with brass screws and cup washers and all other accessories, including 2.5 Sqmm PVC insulated unsheathed copper conductor FRLS earth wire to common earth and connected to earth dolly complete all as specified and directed. Make of Cable: Polycab, Finolex, RR kabel

S&F sub main wiring with single core cable 3 x 10 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLS insulated unheathed stranded copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and directed.

S&F sub main wiring with single core cable 2 x 10 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLS insulated unheathed stranded copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and directed.

S&F sub main wiring with single core cable 2 x 6 sq mm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x4 Sq mm FRLS insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and directed.

Description all as per Srl item No 91 here in before but of size 2 x 4 Sqmm with earth wire 1 x 2.5 Sqmm drawn through existing PVC/steel Surface/Concealed conduit complete all as specified and directed

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 6 Sqmm incl taking down old service connection and removing from the side complete all as specified and directed.

Description all as per Srl item No 94 here in before but for 10 sqmm twin core service wire.

Description all as per Srl item No 94 here in before but for 16 sqmm twin core service wire.

Supply, laying and testing cable XLPE PVC insulated,screened, PVC bedded galvanised steel strip or wire armoured electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE PVC insulated,screened, PVC bedded galvanised steel strip or wire armoured electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed.

M & L for GI pipe of size 40 mm light grade for floor, road cutting and protection of cable all as specified and directed.

Material and labour for 18W 6500 k Cool Day White Rectangular LED Batten Light of size 59.7x8x3.3 cm decorative LED luminaire including necessary connection all as specified and directed. Make: Wipro Cat No. D531865 or equivalent in list of makes.

Supply and fix in replacement of High efficacy 2x1 recess LED flat panel with high brightness LED for glare-free homogenous illumination also for POP ceilings (supplied with wedge brackets) complete with all accessories including necessary connection all as specified. Make: Havells Cat part No PLUTO2X1PLR20WLED840S or equivalent in list of makes.

Supply and fix Street light fitting LED type 35 Watt 230 V AC outdoor type with high pressure die cast alumium hosing and heat resistent complate with driver, lamp holder, lamp bracketwith impact and corrosion resistent including thermal management in multiple optics complete with IP 66 protection complete with GI pipe bracket of reqd length and dia, MS Clamp, Nuts, Bolts & washer) with high power pressure die cast aluminium housing complete with all accessories. Make: Wipro cat No. LR02-391-XXX-57-XX or equivalent in list of makes.

Supply and fixing building flood light LED type 70/80 watt, IP66 with high power LED floodlight with pressure die cast aluminium housing complete with all accessories. Make: Wipro Cat No. LF19-931-060-570XX or equivalent in list of makes.

Taking down carefully AC ceiling fan 1200/1400mm sweep complete in situ at site for servicing such as removing dust & dirt brushing, rubbing with cotton waste, , washing with detergent powder to fan blades, greasing bearing with ball bearing grease & washer packing, checking of bolts/nuts, washer check nuts split pin rubber packing and rubber seal etc and including providing and replacing any item found damaged/unserviceable i,e split pin screw for blades, body & reel capacitor of appropriate capacity, PVC connector, MS galvanised check nut, rubber pads, steel strip clamps, etc to put the fan for smooth and satisfactory working, refixing the fan, motor after executing necessary servicing to their positions, connecting to electric system and testing complete all as specified and as directed by Engr-in-Charge. (Note: Capacitor, PVC connector, MS galvanised check nut, rubber pads, steel strip/PVC condencer clamps if any item replaced, shall be measured separately under respective items.

Description all as per Srl item No 104 here in before but for AC exhaust fan/ Bkt Fan of size 300mm to 450mm sweep.

M& L for replacement of Rewinding of AC ceiling fan single phase 230 volts, 50 c/s 1200mm sweep, any make and type with appropriate gauge super enameled copper winding wire with allied insulation winding material, varnishing with air drying insulation varnish including fixing of any item found damaged/unserviceable i.e capacitor of appropriate cap, PVC connector, MS galvanised check nut, rubber pads , PVC strip steel clamps and testing complete after rewinding and assembling Note: Capacitor, PVC connector, MS galvanised check nut, rubber pads, PVC strip clamps, if any replaced, shall be measured separately under respective items.

Description all as per Srl item No 106 here in before but for fan of 1400 mm sweep.

Description all as per Srl item No 106 here in before but for AC exhaust fan of size 300mm sweep.

Description all as per Srl item No 106 here in before but for AC exhaust fan of size 380mm sweep .

Description all as per Srl item No 106 here in before but for AC exhaust fan of size 450mm sweep .

Description all as per Srl item No 106 here in before but for bracket/cabin fan of size upto 400mm sweep AC 230/240 volts.

Description all as per Srl item No 106 here in before but for bracker/cabin fan/Pedestral Fan of size of size 450mm sweep.

S & F ball baring suitable for AC ceiling fan 1200/1400mm sweep to replace the unserviceable ball bearing of fan motor complete all as specified and directed.

Description all as per Srl item No 112 here in before but for AC exhaust fan /Bkt Fan /Pedestral Fan of size 300 to 380mm sweep.

Description all as per Srl item No 112 here in before but for AC exhaust fan /Bkt Fan /Pedestral Fan of size 400 to 450mm sweep.

Supply& fixing gun metal bushes suitable for AC ceiling fans 1200/1400mm sweep, any make to replace the unserviceable bushes of fan and oiling complete etc all as specified and as directed.

Supply & fixing capacitor 2.5 mfd + 5%, 230/240 volts AC, 50 Hz complete all as specified and directed.

Supply & fixing capacitor 3.15 mfd + 5%, 230/240 volts AC, 50 Hz complete all as specified and directed.

Supply & fixing PVC /Porcelain conductor 02 pole, 02 way heavy duty with fixing screws for any make & size of fans as approved by Engr-in-Charge.

Supply & fixing rubber pads for packing capacitors of AC ceiling fan in down rod bracket suitable for fan of any size and make as approved by Engr-in-Charge.

Supply & fixing steel strip clamps with fixingscrews for holdings capacitors of ceiling fan and fixing to MS socket of fan motor as approved by Engr-in-Charge.

M & L for electric cable PVC insulated with copper conductor (flexible cable) twin core for connecting fan to electric system, complete all as specified & directed.

M & L for M.S socket heavy duty with split pin, locking screw to couple down rod and ceiling fan motor 1200/1400 mm sweep complee all as spfd & directed.

Supply and fixing fan blades for AC ceiling fans 1200mm as per sample including fixing screw and washer complete suitable for fans of old model all as directed and specified by the Engr -in-charge

Supply and fixing fan blades for AC ceiling fans 1400mm as per sample including fixing screw and washer complete suitable for fans of old model all as directed and specified by the Engr -in-charge

M & L for Spray painting to AC ceiling fan 1200/1400mm sweep any make complete to motor assy, down rods, blades with ISI marked white synthetic enamel paint as approved by Engr-in-Charge after preparation of surface including filling cavities with filler & writing MES No as per sample provided complete all as directed by Engr-in-Charge.

Description all as per Srl item No 126 here in before but for exhaust fan exceeding 300mm and upto 450mm.

M&L for Canopies for AC ceiling fan of size 1200/1400mm sweep for any make of fan.

M&L for hanging clamp suitable for ceiling fan of size 1200/1400mm of any make complete with nuts, bolts, rubber reel and locking pin complete all as directed by Engr-in-Charge.

Supply and fixing down rod (hanging rod) made of GI tubing 20mm bore for length upto 120cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified

Supply and fixing down rod (hanging rod) made of GI tubing 20mm bore for length upto 90cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified.

Supply and fixing of louvers made of GI sheet suitable for exhaust fan 300 mm to 380 mm Sweep complete all as specified and directed.

Supply and fixing including grouting in wall of Meter cum distribution board box made up of CRCA sheet material of thickness 2 mm with locking arrangement of size 600 x 500 x 200 mm all as specified and directed.

Supply and fix Electronic Meter with digital display with temper proof cover single phase 5-20 Amp including necessary electric connection in existing circuit all as specified and directed. Make: L&T Cat No. WM101BC5DL0 or equivalent in list of makes.

M/S PRAJAPATI ENGINEERS

LAL CONSTRUCTIONS

BMMJ TRADERS AND ENGINEERS

M/S RAJ ENGINEERS

SATISH AND CO

M/S S K Electricals Regd