Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹99.1 LAdmitted-Finance JAIPUR JAIPUR | L1 | Admitted-Finance | |
| 2 | L2₹1.1 Cr+₹8.7 L (8.80%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹1.1 Cr+₹13.0 L (13.1%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹1.2 Cr+₹17.4 L (17.6%)Admitted-Finance | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Swastic Constructions L2 | NEST INFRA L4 | M/s SOMRA CONSTRUCTION COMPANY L3 | BHAVNA CONSTRUCTION COMPANY L1 |
|---|---|---|---|---|---|---|---|
| 1.00(1) Cubical cabins, furniture, A.C. Work in Room No.105, 201, 210 & 211 at Directorate Building Ambedkar Bhawan, Jaipur | |||||||
| 1.10 | Supply of mid back Revolving chair with lumber Support overall chair height 920 mm, backeest height 460 mm, backrest width 410 mm. Seat height 420 mm, Seat width 440 mm, Seat depth 400 mm. Pedstal size 580 mm, thickness of Polyurethane foam used in Seat 45 mm with GSM 220 gram and backrest 45 mm thickness of plywood 12mm thick and as per Direction of Engineer-in-Charge. | 32 | Each | 3,000 ₹96,000 Lowest | 5,145 ₹1,64,640 | 5,000 ₹1,60,000 | 4,535 ₹1,45,120 |
| 1.20 | VISITOR CHAIR : SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)
BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.
Overall Dimensions of Chair Seat Height - 46.5cm.
Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. | 16 | Each | 3,000 ₹48,000 Lowest | 6,269 ₹1,00,304 | 7,000 ₹1,12,000 | 5,520 ₹88,320 |
| 1.30 | EXECUTIVE HIGH BACK CHAIR : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather.
*HIGH BACK SIZE : 47.5 cm. (W) x 77 cm. (D)
ARMRESTS (FU3201,FU3202): The armrest top is moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM (FU3201,FU3202): The adjustable ting mechanism is designed with the following features: | 2 | Each | 6,000 ₹12,000 Lowest | 41,262 ₹82,524 | 10,000 ₹20,000 | 37,093 ₹74,186 |
| 1.31• 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing is made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT (FU 3201/FU3202): Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT (FU3201/FU3202): Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT (FU3201/FU3202): The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.).TWIN WHEEL CASTOR (FU3201,FU3202) : 5 Nos. twin wheel castors are injection moulded in plastic having 6.0±0.1cm wheel Diameter and assembled to pedestal. This product should be GREENGUARD GOLD, BIFMA LEVEL, GRIHA, GREENPRO, SCS IAQ certified. Greenguard certificate shall be from UL. | |||||||
| 1.40 | SOFA 2 Seater : SEAT FOAM: The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette .UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. (W) 146.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm | 2 | Each | 20,000 ₹40,000 Lowest | 32,910 ₹65,820 | 50,000 ₹1,00,000 | 29,410 ₹58,820 |
| 1.50 | SOFA 3 Seater : SEAT FOAM: The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette .UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. (W) 206.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm | 2 | Each | 30,000 ₹60,000 Lowest | 40,285 ₹80,570 | 70,000 ₹1,40,000 | 35,783 ₹71,566 |
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
18 Nov 2024, 6:00 pmClosed
Executive Engineer
RSAMB Division-II Jaipur
Various Repair and Renovation work at Ambedkar Bhawan, SJED Jaipur
2024_RSAMB_430356_1
RSAMB/Jaipur-II/NIT-04/2024-25
Open Tender
Civil Works
Percentage
180 days
Jaipur
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
EE RSAMB Division-II Jaipur
₹2.4 L
Yes
20 Nov 2024
7 Nov 2024
20 Nov 2024
7 Nov 2024
18 Nov 2024
12 Nov 2024
Amount
(1) Cubical cabins, furniture, A.C. Work in Room No.105, 201, 210 & 211 at Directorate Building Ambedkar Bhawan, Jaipur
Supply of mid back Revolving chair with lumber Support overall chair height 920 mm, backeest height 460 mm, backrest width 410 mm. Seat height 420 mm, Seat width 440 mm, Seat depth 400 mm. Pedstal size 580 mm, thickness of Polyurethane foam used in Seat 45 mm with GSM 220 gram and backrest 45 mm thickness of plywood 12mm thick and as per Direction of Engineer-in-Charge.
VISITOR CHAIR : SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of Chair Seat Height - 46.5cm. Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm.
EXECUTIVE HIGH BACK CHAIR : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. *HIGH BACK SIZE : 47.5 cm. (W) x 77 cm. (D) ARMRESTS (FU3201,FU3202): The armrest top is moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM (FU3201,FU3202): The adjustable ting mechanism is designed with the following features:
• 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing is made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT (FU 3201/FU3202): Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT (FU3201/FU3202): Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT (FU3201/FU3202): The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.).TWIN WHEEL CASTOR (FU3201,FU3202) : 5 Nos. twin wheel castors are injection moulded in plastic having 6.0±0.1cm wheel Diameter and assembled to pedestal. This product should be GREENGUARD GOLD, BIFMA LEVEL, GRIHA, GREENPRO, SCS IAQ certified. Greenguard certificate shall be from UL.
SOFA 2 Seater : SEAT FOAM: The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette .UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. (W) 146.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm
SOFA 3 Seater : SEAT FOAM: The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette .UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. (W) 206.0* (D) 90.5(H) 85.5 cm seat (H) 45.0 cm
Bidder Name
Amount
Swastic Constructions (GSTN-08ACQPG4375G2ZA) BID ID -2990516
NEST INFRA (GSTN-NA) BID ID -2991330
M/s SOMRA CONSTRUCTION COMPANY (GSTN-NA) BID ID -2991190
BHAVNA CONSTRUCTION COMPANY (GSTN-NA) BID ID -2990756
BHAVNA CONSTRUCTION COMPANY (BID ID -2990756)
NEST INFRA (BID ID -2991330)
M/s SOMRA CONSTRUCTION COMPANY (BID ID -2991190)
Swastic Constructions (BID ID -2990516)
M/s SOMRA CONSTRUCTION COMPANY (BID ID -2991190)
NEST INFRA (BID ID -2991330)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.56 MB
Tendernotice_2.pdf
PDF • 0.49 MB
Tendernotice_3.pdf
PDF • 0.34 MB
Tendernotice_4.pdf
PDF • 0.12 MB
Tendernotice_5.pdf
PDF • 0.43 MB
Tendernotice_6.pdf
PDF • 0.68 MB
BOQ_773743.xls
BOQ • 0.64 MB
Bid-Doc-SJED-JPR.pdf
Tender Documents • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .