C O Health Sub Centre Building at Nabon Tehsil Kasauli and Distt Solan HP

Amount

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with in all lead and lift as per Technical Specification Clause 1603.1 (one six zero three point one) and MORD specification including carriage of all labour equipment and materials to various location of site through all modes of transportations in all lead, lift and all incidental charges. all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erossions, damage to hill side, water pollutions etc. and to protect stability of hill side rock work shall be executed with chiseling, wedging out rock, where blasting is prohibited).All earth work in excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevations and leyels as shown on the drawing or as directed by the Engineer-in-Charge. Stacking of materials useful for construction at suitable site and safe disposal of unserviceable cut material in specified manners, trimming, filling of unevenness blindages and finishing of the road to specified dimensions as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other cases, it shall be removed by the suitable diversion, bailing out or dewatering as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with in all lead and lift as per Technical Specification Clause 1603.1( one six zero three point one) and MORD specification including carriage of all labour equipment and materials to various location of site through all modes of transportations in all lead, lift and all incidental charges. all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erossions, damage to hill side, water pollutions etc., and to protect stability of hill side rock work shall be executed with chiseling, wedging out rock, where blasting is prohibited). All earth work in excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevations and levels as shown on the drawing or as directed by the Engineer-in- Charge. Stacking of materials useful for construction at suitable sites and safe disposal of unserviceable cut materials in specified manners, trimming, filling of unevenness blindages and finishing of the road to specified dimensions as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other cases, it shall be removed by the suitable diversion, bailing out or de watering as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Centering and shuttering including strutting, propping etc. and removal of form for complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Wall any thickness

Stairs, (excluding landings) except spiral?staircases

edges of slabs

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete including cost of centring and shuttering in Foundation and plinth including carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges.

Providing and laying in position 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying in position 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) cement concrete of specified grade inluding the cost of centering and shuttering - All work up to plinth level as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Steel reinforcement for R.C.C. work Mild steel and Medium Tensile steel bars including straightening, cutting, bending, placing in position and binding all complete upto plinth level as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Backfilling of Granular material behind abutment, wing wall and return wall, breast walls, retaining walls and parapets up to all heights, depths and levels complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Stone filling dry hand packed tightly in foundation & plinth as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing ISI marked flush door shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing wire gauge shutters Kiln seasoned and chemically treaten hollock woodusing galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges andn necessary screws as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 20mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 19 (Nineteen) millimeters thick commercial board water proof shutters for cup board including box/shelves, including fixing with nickel plated piano hinges with screws complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 19 (Nineteen) millimeters thick commercial board water proof shutters for cup board , including fixing with nickel plated piano hinges with screws complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing aluminium tower bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminium twin rubber stopper hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 75mm dia special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. Complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 250mm bright finished brass hard drawn hooks and eyes as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Precast terrazzo tiles hydraulic compressed 22 mm thick (with marble chips of 12mm) fixed on wall on 20 mm thick cement plaster 1:4 (1 cement:4 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Extra, if terrazzo tiles are laid in tread not exceeding 30 cm in width.

Precast terrazzo tiles hydraulic compressed 22 mm thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement: 3 sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tile as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Light shade pigment using white cement

Providing and fixing White glazed tiles 6mm (six millimeter) thick in skirting, risers of steps and dedo 12mm thick cement mortar 1:3 (one cement isto three sand ) and jointed with cement slurry as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying marble stone flooring 18mm thick marble stone as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying factory made chamfered edge 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing corrugated G.S. sheet roofing 0.63 mm thick with zinc coating not less than 275 gm/ m² including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing window and Ventilators frame manufactured of channel section of 75X40 mm, (Seventy Five into Forty millimeter) for end frames and for center frame channel sections 75X40 mm, (Seventy Five into Forty millimeter) with mild steel flat in combination welded together to make one frame with making square steel saction with mild steel flat of 20*4 (twenty into four milimetres) and 12*4 ( twelve into four milimetres) shutter of rolled steel saction F- 7 B (seven B) saction including glass pans four milimetres thick in glazed panel and wire guage of designation 85 (eighty five) with 0.56 ( zero point five six) milimetres dia sash pan duly welded of all corner and joints properly. Hold fast of mild steel flat 200*50*5( Two hundred into Fifty into Five)millimeter duly welded at corner and joint of all steel section embedded in cement concrete block 1:3:6 100*100*100mm [ One cement isto Three sand isto Six graded hard stone aggregate 20(Twenty) millimeters nominal size One hundred into One hundred into One hundred) including providing and fixing of fitting that is handles, tower bolts hooks and eyes and applying a coat of primer with red lead paint and fixed in position complete in all respect as per architectural drawing and direction of Engineer-in- Charge as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110mm diameter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing unplasticised -PVC pipe clips of 110mm diameter of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm cement plaster on the fair side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

White washing with lime to give an even shade New work (three or more coats) complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Finishing walls with textured exterior paint of required shade tes New work (Two or more coats applied @ for external plaster are for height upto 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing weep holes in abutments return walls,dirt walls, wing walls with 100 mm (hundred milimetres) dia PVC pipe extending through the full width of the structure with slop of IV:20 (twenty) H towards drawing face complete as per drawing and Technical specification. including carriage of all labour equipments and material to various location through all modes of transportation in all leads and lifts as per the direction of the Engineer-in-charge

Providing and laying cement concrete drain with cement concrete 1:3:6 (1 Cement :3 Sand: 6 graded stone aggregate 20mm nominal dia) mechanically mixed in open mixed in open surface drain with plinth protection having internal size 20x15 cm with side wall of 10cm thick & inside plastering with CM 1:3 including earthwork & finished with floating coat of neat cement complete as per standard design as per HPPWD specification 1990 volume-1 including carriage of all labour equipments aand materials to various location through all leads lifts and other incidentials charges complete as per the entire satisfaction of Engineer-In-Charge.

Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 40 mm thick with 20 mm nominal size stone aggregat finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. as per drawing and Technical specification. including carriage of all labour equipments and material to various location through all modes of transportation in all leads and lifts as per the direction of the Engineer-in-charge

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

15mm nominal ia

20mm nominal bore

32mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

25mm to 40mm nominal bore

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Polyethelene-Aluminium?Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints including cutting chases and making good the wall etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

1216 (16 mm OD) pipe

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tapw 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing flushing plate control palate vignette prime (JCP-CHR-812415) of Jaguar or its equivalent complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 510x1040 mm bowl depth 250 as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing P.V.C. waste pipe semi rigid 32mm dia for sink or wash basin including P.V.C. waste fittings complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm length and 15mm nominal bore complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. (New work) 40mm nominal bore complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm nominal bore C.P brass long nose bibcock cat No-CON 107 KN Jaguar or its equivalent single control of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm nominal bore C.P brass long nose bibcock cat No-OPP-15037 PM of Jaguar or its equivalent single control of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P brass pillar cock cat No-OPP-15001 PM of Jaguar or its equivalent of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing angular stop cock with wall flange of opel prime No-CON-150083 KN of Jaguar or its equivalent of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing soap dish recessed type stainless steel AHS-1531of Jaguar or its equivalent of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing soap dish stainless steel CAN-1131Nof Jaguar or its equivalent of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing towel rack with lower hanger No-AHS-1581H of hotlier series of Jaguar or its equivalent of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing corner glass self with bracket No-ACN-1173 of hotlier series of Jaguar, ESS-ESS or its equivalent of approved quality conforming to IS standard complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) complete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

15mm nominal bore

20mm nominal bore

32mm nominal bore

Providing and fixing Polyethelene-Aluminium?Polyethelene PE-AL- PE Composite tank conforming to IS - 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes fittings and the base support for 1000 ltr capacity complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mmx90mm PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm dia PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm dia PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100mm dia PVC cowl complete as per direction of Engineer in charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges. Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :

With Sewer bricks conforming to IS : 4885

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and fixing C.I. cover 600x600mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg complete as per direction of the engineer in charge including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

M/s Jai Shiv Shakti Building Materials