RENOVTION WORK OF SRI MAHADESHWARA COLLEGE BUILDING IN KOLLEGAL TOWN CHAMARAJANAGAR DISTRICT

Replastering & Painting Work

19.55 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per directi... 1091.54 m²

8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor... 1091.54 m²

8.16.3 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for... 3913.40 m

8.55.2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall... 1091.41 m²

8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ... 1091.54 m²

8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply... 1635.96 m²

8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in... 2577.35 m²

8.74.1 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied @ 1.67 l/ 10 m²) on existing cement paint surface including preparing the surface after thoroughly cl... 2859.87 m²

8.62 Painting with oil type wood preservative of approved brand and manufacture: Old work (one coats) as per specifications and as per direc- tions of Engineer in charge. ---- Including c... 848.10 m²

Watersupply and Sanitary Work

1.12 Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a... 59.17 m³

2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 29.58 m³

2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 14.79 m³

10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint... 175.00 m

13.53 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ... 20.00 1 chamber

13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ... 2000.00 L

13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t... 72.00 m

13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the... 400.00 m

14.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w... 8.00 each

14.7.6 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 7.00 each

14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- Including cost of all materials cost of labour ... 7.00 each

Increasing height of parapet wall & waterproofing treatment for terrace

20.119 Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with ... 1770.51 m²

2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 119.60 m³

15.8 old Terrace screed Repair with Uv Resistant waterproof coating - Providing and Applying high elastic & resilient Acrylic polymer Waterproofing coating which is single component, cold applied,... 1527.32 m²

6.2 Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all m... 67.39 m³

8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl... 653.39 m²

8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint... 653.39 m²

MS Grill work for terrace area

11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat... 5566.88 kg

11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee... 157.55 kg

8.37 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer b... 319.31 m²

7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g... 771.10 m²

7.39.1 Providing and fixing precoated galvanised steel sheet roofing accessories

0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri... 31.54 m

11.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, w... 26.25 m²

11.37.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing... 62.28 m²

Construction of Toitet Buiding For Staff

1.15.1 Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru... 43.76 m³

2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 7.39 m³

5.4 Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost of all materials cost of labour cost of equipment and machiner... 19.33 m³

1.9 Manual Means -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos... 8.63 m³

2.2.1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ... 3.46 m³

2.3.1 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars... 2.16 m³

2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 2.16 m³

2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 3.03 m³

2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 0.47 m³

2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite... 3.58 m³

2.11.a Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,... 2.67 t

6.2 Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all m... 13.10 m³

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin... 131.70 m²

8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi... 17.74 m²

8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo... 101.99 m²

8.55.2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall... 201.27 m²

8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ... 90.16 m²

8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus... 101.99 m²

2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 2.94 m³

9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as... 19.18 m²

9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti... 54.87 m²

10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint... 18.00 m

13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the... 38.92 m

14.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w... 2.00 each

14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip... 1.00 each

14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w... 4.00 each

14.7.6 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 4.00 each

14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- Including cost of all materials cost of labour ... 4.00 each

12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15... 22.80 m

12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered wi... 6.30 m²

12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E... 3.24 m²

11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open... 68.04 kg

13.53 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ... 4.00 1 chamber

13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t... 8.00 m

13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ... 500.00 L

14.31 Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet... 2.00 each

14.39 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh... 2.00 each

10.10.10 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC Tee ---- Including cost o... 6.00 each

10.9.8 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Elbows ---- Including... 8.00 each

Construction of Cement concrete pavement

1.12 Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a... 255.00 m³

4.1.A.v Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material... 127.50 m³

4.17 Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ... 127.50 m³

6.5 Pavement Quality M30 grade Concrete (RMC) with OPC & GGPS laid using Paver - Construction of un-reinforced, dowel jointed M30 grade Pavement Quality Concrete Pavement over a prepared sub base... 127.50 m³

V3, item no 10 Crack Groove Cutting: Groove shall be cut using hand held

electrically operated concrete cutting machine of size of 50 mm

wide and 75 mm deep on each side of the crack to form as "V"

groove all along ... 220.00 m

Providing Wooden Doors& Windows

12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of ce... 0.86 m³

12.24 Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick inclu... 18.00 m²

12.18 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d... 28.80 m²

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e... 43.20 m²

Electrical work

1.5.1 Manual Means -

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica... 50.00 m³

Elec SR Vol 6 P.No -1 item no 1.1.2 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming

to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and

fixing using inverted woodplugs in case of RCC ceilin... 110.00 m

Elec SR Vol-6 ,chapter 1, item no 1.1.3 SupplyingheavygaugePVCconduitpipe.dia.mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplug... 85.00 m

Elec SR Vol-6, Item No1.3.2 Supplying heavy gauge conduit pipe. dia. mm thick suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up... 200.00 m

Elec SR Vol-6, Item No 1.3.3 Supplying heavy gauge conduit pipe. dia. mm thick suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up... 125.00 m

Elec SR Vol-6, Item No 1.13 Supplyin And Fixing Metal Fan Box with Round Hook ---- Including cost of all materials cost of labour cost of equipment and machinery cost of hire charges of machinery lead AND lift loading and unload... 25.00 Each

Elec SR Vol-6, Item No.1.5.2 Supplying and fixing PVC/metal conduit Deep junction box. 25 mm deep Junction box ---- Including cost of all materials cost of labour cost of equipment and machinery cost of hire charges of machinery ... 250.00 Each

Elec SR Vol-6, Item No. 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 25.00 Each

Elec SR Vol-6, Item No 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 10.00 Each

Elec SR Vol-6, Item No. 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 16.00 Each

Elec SR Vol-6, Item No. 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 18.00 Each

Elec SR Vol-6, Item No. 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 70.00 Each

Elec SR Vol-6, Item No.3.4.6 Supplyingandflushmountingpowdercoated/galvanizedmetalboxsuitableformountingmodularswitchplates.Theboxshouldbefirmlyflush mounted after due groove cutting in Brick/Stone/C.C wall 16-18 Way ---- Includi... 5.00 Each

Elec SR Vol-6, Item No.3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 25.00 Each

Elec SR Vol-6, Item No.3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 10.00 Each

Elec SR Vol-6, Item No.3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 10.00 Each

Elec SR Vol-6, Item No.3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 10.00 Each

Elec SR Vol-6, Item No.3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 70.00 Each

Elec SR Vol-6, Item No.3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 5.00 Each

Elec SR Vol-6, P.No.18, Item No.5.19.14 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ... 4.00 Each

Elec SR Vol-6, P.No.18, Item No 5.19.12 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ... 2.00 Each

Elec SR Vol-6, Item No.2.2.1 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulat... 80.00 Each

Elec SR Vol-6 Item No.2.2.2 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulat... 120.00 Each

Elec SR Vol-6, Item No.2.2.3 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insulat... 200.00 Each

Elec SR Vol-6, Item No.3.6.1 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- Including cost of all materials cost of labour cost of ... 525.00 Each

Elec SR Vol-6, Item No.3.6.2 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- Including cost of all materials cost of labour cost of ... 20.00 Each

Elec SR Vol-6, Item No.3.6.3 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket ---- Including cost of all materials cost of labour cost of... 125.00 Each

Elec SR Vol-6, Item No.3.6.4 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- Including cost of all materials cost of ... 75.00 Each

Elec SR Vol-6, Item No.3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push ---- Including cost of all materials cost of labour cost of equ... 10.00 Each

Elec SR Vol-6, Item No.3.6.9 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- Including cost of all materials cost of labour cost of equi... 50.00 Each

Elec SR Vol-6, Item No.3.6.10 Supplying and fixing of modular switch & onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6.16A Universal Socket ---- Including cost of all materials cost of labour cos... 50.00 Each

Elec SR Vol-6, Item No.2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 2000.00 m

Elec SR Vol-6 Item No.2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 3000.00 m

Elec SR Vol-6, Item No.2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 6000.00 Mtr

Elec SR Vol-6, Item No.2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 4000.00 Mtr

Elec SR Vol-6 Item No.2.3.7 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 200.00 Mtr

Elec SR Vol-6, Item No. 3.10.2 Supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws (80/90 mm) ---- Including cost of all materials cost of labour cost of e... 399.00 Each

Elec SR Vol-6, Item No.12.2.1 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote (Ding Dong Bell) ---- Including cost of al... 10.00 Each

Elec SR Vol-6, Item No.11.3.2 Supplying of .feet - LED PVC Square Batten .W with high quality diffuser with Life of 25000 burning hours & 70per lumen maintenance with CRI 80. Power Input 220-240V at 50Hz & Power factor 0.9 along w... 235.00 Each

Elec SR Vol-6, Item No.11.6.4 Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI ... 15.00 Each

Elec SR Vol-6 P.No 30, Item No.6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm) ---- Including cost of all materials cost of labour cost of equip... 8.00 Each

Elec SR Vol-6 P.No 30,Item No. 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be... 50.00 Each

Elec SR Vol-6 P.No 56,Item No.13.7.1 Fixing all types and all capacities of fluorescent/falseceiling/spotlight/CFL/LED fittings indoor on the wall/ceiling/rafters/girde rsusing 23/0.0076" twint wisted PVC insulated wires,required Nos of ... 235.00 Each

P.No 57,Item No.13.10 Fixing a Ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook wisth fan regulator to the existing board together wisth wupplying and fixing 5amps. Ceiling rose, necessa... 50.00 Each

Elec SR Vol-6 P.No 57, Item No.13.12 Extra length of GI pipe of class B 19mm dia for down rod ---- Including cost of all materials cost of labour cost of equipment and machinery cost of hire charges of machinery lead AND lift loading and... 25.00 Mtr

Elec SR Vol-6 P.No 57,Item No.13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with ufficient length of 23 / 0.0076 inch PVC insulated twin core wire. ---- Including cost of... 8.00 Each

Elec SR Vol-6 P.No 17,Item No.5.18.6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit... 40.00 Each

Elec SR Vol-6 P.No 18,Item No 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit... 10.00 Each

Elec SR Vol-6 P.No 20,Item No 5.42.2 Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped... 10000.00 Sq CM

Elec SR Vol-6 P.No 20,Item No 5.40.1 Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which a... 2.00 Rmtr

Elec SR Vol-6 P.No 20,Item No 5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x... 8.00 Rmtr

Elec SR Vol-6 P.No 17,Item No 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O... 4.00 Each

Elec SR Vol-6 P.No17,Item No 5.16 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O... 4.00 Each

Elec SR Vol-6 P.No 18,Item No 5.20.10 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel Board .63 A 4 pole ---- Including cost of all materials cost of labour cost... 6.00 Each

Elec SR Vol-6 P.No 18,Item No 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr... 1.00 Each

Elec SR Vol-6 P.No 11,Item No 5.12.5 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution). 250 A ---- Including cost of all materials cost of la... 1.00 Each

Vol-6 ESCOM SR P No 13. 208. 32.12 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 . 50 Sq... 0.08 Km

Vol -6 ESCOM SR P.No 52, 175.21.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm ---- Including cost of all materials cost... 0.08 Km

Vol -6 Elec SR 6, 2.5.8 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and FR PVC insulation and sheath... 50.00 Mtr

Vol -6 Elec SR 59,12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 6.00 Each

Vol -6 Elec SR Pg No 59,Item No.12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip ---- Including cost of all materials cost of labour cost of equipment and machinery cost of ... 55.00 Mtr

Vol -6 Elec SR Pg No 46, Item No 11.8.5 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc... 2.00 Each

Vol -6 Elec SR Pg No 56, Item No13.2.2 Supplying and Fixing.mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street lig... 2.00 Each