GE/863/EWS-T-51 OF 2021-22

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) removing rubbish off the premises complete all as specified and directed.

M&L 25mm thick cement concrete type B-O, 1:2:4 (using12.5mm graded stone agg ) as in sub flooring complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L hard core of broken stone of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles (300x200mm) x 6-7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match such skriting /dado and risers to steps etc laid over and including bedding layer of 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 Type C-1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and fair complete all as specified and directed.

M&L two coats of cement base paint over a coat of chalk whiting on plastered surface including preparation of newly plastered surfaces complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and directed.

Taking down chowkhats or frames area n.exc. 1.5 Sqm (without taking off shutters from the frame) complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain, coloured, PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC Door shutter 30mm thick (Style), consisting of frame made out MS tube for top and bottem rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. incl one coat of red oxide primer complete all as specified and directed.

S&F pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. incl one coat of red oxide primer complete all as specified and directed.

S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified and directed.

S&F factory made 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I, section 8 clause 8.24(b) complete all as specified and directed.

S&F steel windows with side hung shutters incl box type hing, steel handle and peg stay complete with glazing bar complete all as specified and directed.

All as per item No. 20 here-in-before but without glazing bars

S&F framed work such as framed guard bars, barred iron doors, grills, gratings, etc with ends of bars shouldered or riveted framed guard bars and similar work confirming to Fe-290. Gde E-165 complete all as specified and directed.

M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed.

M&L two coats of synthetic enamal paint to steel surfaces of any discription over 10 cm width or girth not otherwise described inclding prepration of newly untreates surfaces complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed inclding prepration of newly untreates surfaces complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed inclding prepration of newly untreates surfaces complete all as specified and directed.

S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved inclding prepration of newly untreates surfaces complete all as specified and directed.

S & F butt hinges, 100mm medium weight, cold rolled mild steel inclding prepration of newly untreates surfaces complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples inclding prepration of newly untreates surfaces complete all as specified and directed.

Hacking out old broken glass (any thickness) , size, quality or description ) from metal frame including punching or drilling out old glazing pins inclding prepration of newly untreates surfaces complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane inclding prepration of newly untreates surfaces complete all as specified and directed.

S&F in repair curtain rod made out of 25mm dia (outer dia ) pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm including brackets, fasteners, screws as approved complete all as specified and directed.

Dismantling false ceiling boards any description and in any position incl frame work complete all as specified and directed.

S&F false ceiling of anodised aluminium snap gride of size 600 X 600 mm frame work, with hangers of 6 mm dia, G I (upto 1200mm length), adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size, 60 mm long and expansion hold fasteners 12.5mm dia & 40mm long for false ceiling, including exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid complete all as specified and directed.

Dismantling fibre sheet in roof covering complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with screw complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet ,0.50 mm thick of an colour as approved, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of an colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250) (Quality-A) complete all as specified and directed.

S&F Mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250) (Quality-A) complete all as specified and directed.

Demolition of precast concrete block walling masonary, built in any type of cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for PCC1:3:6 type C-1 (using 20mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6 complete all as specified and directed.

S&F in repair 2000 Ltrs capacity, rotational moulded, polyethylene water storage tanks (cylindrical vertical with closed top), double layred, hoisted and fixed in position all as specified in SSR Part – I, including 20mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube complete all as specified and directed.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing complete all as specified and directed.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fittings and fixed complete to walls and ceiling or laid into floor complete all as specified and directed.

Fixing only 15 mm GI water tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing complete all as specified and directed.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fittings and fixed complete to walls and ceiling or laid into floor complete all as specified and directed.

Fixing only 20 mm GI water tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

S&F in repair Bib taps, cast copper alloy, chromium plated, fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube fixed complete all as specified and directed.

S&F in repairs 15mm bore stop valve/angle valve cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butter fly handles complete all as specified and directed.

S&F in repair PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia complete all as specified and directed.

S&F in repair Vitreous china squatting pan 'Orissa pattern' size 580X 440 mm white with integral foot rest (exluding flushing cistern and flush pipe) including connection to trap,concrete and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., including plastic water closet seat closed pattern with cover and hinging device and trap with connection complete all as specified and directed.

S&F Chromium plated jet for EWC complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, flat back, size 550 X 400 mm including fixing with brackets including supply & fixing waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete all as specified and directed.

S&F in repairs vitreous China Urinal, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including urinal spreader of PTMT any colour for fixing with 15mm dia pipe including connection to flushing pipe and outgoing pipes with 32mm bore PVC waste pipe of length 900mm to 1200mm complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs Brass, chromium plated shower rose, 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube complete all as specified and directed.

S&F in repair brass ,CP tubular towel rail, 20 mm dia. 60 cm long between flanges complete all as specified and directed.

S&F in repair Soap dish, cast copper alloy, chromium plated with screws complete all as specified and directed.

S&F in repair 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for washing rubbing down and applying of two coats of cement base paint to old surfaces of walls complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered surface and applying of one oil bound distemper to old surfaces of walls complete all as specified and directed.

M&L one coat of synthetic enamal paint to steel surfaces of any discription not otherwise described over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying two coat of white wash complete all as specified and directed

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketcth fitting & regulator etc including making good to the distrurbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed .

M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded ,1100 volts grade copper conductor cable, unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl FRLS PVC conduit with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylum laminated sheet on top for fixing switches sockets etc, for one light point / fan / Bell point controlled by one switch complete all as specified and directed.

All as per Srl item No 73 here-in-before but controlled with one 3 pin socket outlet 5 Amp on independent board with other switches with cable 2.5 Sqmm.

All as per Srl item No 73 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 2.5 Sqmm.

Supply and fixing in replacement of LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light, driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten / angle fittings with and including 7 Watts LED lamp of approved make complete all as specified and directed.

M & L for Switch piano, flush type, single pole, one way 5 Amp complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed .

M & L for Switch piano, flush type, single pole, one way, 16 Amp complete all as specified and directed.

M & L for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

Supply and fixing in repair miniature circuit breaker (MCB), SPN, 32 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection, testing and commissioning complete all as specified and directed.

Supply and fixing in repair 240V, 10 KA, 'B' curve, miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioningall complete as specified and directed.

Supply and fixing in replacement of sheet metal enclosure, single pole and neutral, 8 way with 200 Amp rated bus bar, 240 volt, Double Door complete all as specified and directed.

S &F Ceiling rose, 3 terminal complete all as specified and directed .

M&L in replacement /renewal earthing complete with galvanised steel earth plate electrode 60cmX60cmX 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I,connected to earthing test point all as specified or indicated including testing on completion ,necessary excavation, earthwork, PCC works in 1:2:4 type B-1, form work and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, GI Pipe of 15 mm dia of light grade for protection of earth wire complete all as specified and directed.

M & L in repair Wiring for circuit/submain wiring alongwith earth wire in and including PVC conduit, medium grade with 2x6.0 sq. mm + 1x4.0 sq. mm earth wire FRLS ,PVC insulated, copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.

Supplying, laying, jointing & testing in replacement of cable XLPE insulated as per IS 7098 (Part-I)-1988, marked, screened, PVC sheathed, armoured electric power cable ( heavy duty) with aluminium conductor for working voltage upto and including 1100 Volts cross sectional area 10 Sqmm 2 core with aluminium stranded conductor, laid in trenches / fixed on pole / wall / passed through pipe complete all as specified and directed. Note :- Ant type of road cutting involved and making good with PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including necessary form work shall deemed to be included in quoted rate.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth in hard/dense soil for laying underground cables / erection of steel tubular poles / stay pit etc complete all as specified and directed .

Removing excavated surplus material to a distance n exc 50m and depositing where directed at level n. exc 1.5m above the starting point in any type of soil complete all as specified and directed.

M & L for sand cushioning the UG cable, screened, unwashed river sand and punning for cushioning to cable complete all as speicified and directed.

M & L for laying dry bricks old size with sub class 'B' made of burnt clay best quality locally available with permissible tolerance , laid straight in trench for protection of cable complete all as specified and directed.

Returning, filling in, incl spreading ,levelling, watering and well ramming in layer n exc 25cm in soil each layer complete all as specified and directed.

S & F in replacement of GI tubing 50mm (Light grade) laid in trenches, under road or fixed to wall as mechnical protection of UG cable complete all as specified and directed.

GULATI BUILDERS

A P ENTERPRISES

M/s Parmod Kumar