personal safety kit reflective luminous garments Personal Safety Kit Reflective Luminous Garments ( 400 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to EN Standard EN:471-2003 + A1:2007 - This garment as per the specification Yes - Reflective Luminous Garments High visibility warning garments with synthetic hook and loop fasteners High visibility warning garments with synthetic slide fasteners

personal safety kit reflective luminous garments Personal Safety Kit Reflective Luminous Garments ( 400 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to EN Standard EN:471-2003 + A1:2007 - This garment as per the specification Yes - Reflective Luminous Garments High visibility warning garments with synthetic hook and loop fasteners High visibility warning garments with synthetic slide fasteners

High visibility warning garments with synthetic hook and loop fasteners Type of garment Jacket Jacket Drawing for Reflective Luminous Garments http:/www.dgserver.dg snd.gov.in/rc/46161712 .pdf - Drawing seen and understood Yes - CONSTRUCTIONAL Size Medium(M) (Suitable for person of height 161-168 cm

Chest Girth 103-107 cm

Waist Girth 82-86 cm) Medium(M) (Suitable for person of height 161-168 cm

Waist Girth 82-86 cm) Garment color Flourescent orange-red (for Essential Service ) - 1/6 BASIC CLOTH Yes - The overall blend composition as per IS : 3416:1988 Polyester 65 +/- 3 % and Cotton 35% - SEWING THREAD 100% Spun Polyester 3 ply sewing thread of matching colour of best trade quality shall be used for stitching. - Fabrication fabrication of waist coat as per drawing and specification fabrication of jacket as per drawing and specification

fabrication of waist coat as per drawing and specification

Fabrication of Harness: As per drawing and specification Total area of back ground material front plus back as per EN 471:2003 (sq. mtr) 0.8/0.5 - There shall be no joints at face and back of the garment either on background material or on Reflective material. Yes - Width of retro reflective material for all types of garments (mm) 333 - Patch pocket true - Patch pocket Confirmity to EN Standard size (cm) 15 x 15 - Piping shall be given using self material of background cloth Yes - Ends per inch and picks per inch of background material 224 - Area of back ground material for front/back side (%) 50/50 - Area of retro reflective material - front/back side (%) 50/50 - Total Area of retro reflective material front back as per EN 471:2003 (sq. mtr) 0.20/0.13 - 2/6 Back ground material front plus back as per EN 471:2003 (sq. mtr) Total Area. 0.8/0.5 - Retro reflective tape Micro prismatic type

white or silver colour certified by the manufacturer of retro reflective material.The retro reflective material should be certified by the manufacturer to withstand 75 wash cycles @ 60 degree C and for Temperature Variation test. - FASTENERS for High visibility warning garments with synthetic slide fasters: For Jacket & Waist Coat the same shall be Heavy Open ended flat auto lock type. Yes - Fastner- Hook and Loop

Tape - 50mm wide as per IS : 8156(RA 2004) and drawing Yes - Marking General Marking : Each piece of warning garment shall be marked by providing a Cloth Label attached affixed to the garment. The label shall be visible

legible and durable up to 75 cycles of washing. The marking shall be in black on white background either woven or printed. Yes - Specific Marking Name or trade mark of the manufacturer

Desig nation of the product

Class

Size of Garment Level of performance and Specification No. - Marking of departmental identification true - Marking required as per true - 3/6 user department choice Marking depaertmental identifications (micro prismatic material) for back (cm) 20 x 15 - Marking departmental identifications (micro prismatic material) in case of coverall

bib and brtaze trouser (cm) 30 x 5 - Marking depaertmental identifications (micro prismatic material) for front (cm) 15 x 5 - PERFORMANCE HIGH GLOW RETROREFLECTIVE MATERIAL Micro prismatic material of 50 mm wide Band of new material conforming to EN 471-2003 + A1:2007 shall be used. The supply shall confirm to the requirements of Level 2 of separate performance material confirming to Table 4 of EN471:2003 +A1:2007 - The garment shall provide 360 degree visibility Yes - Chromaticity co- ordinates and luminous factor of background material as per table 2 of EN 471-2003 Yes - Chromaticity co- ordinates and luminous factor of background material after exposure to xenon arc lamp as per table 2 of EN 471-2003 Yes - PACKAGING Packing Each piece will be packed in Button down Poly bags of 200 GSM and 50 such pieces to be packed in corrugated Carton boxes of 6 ply with 160 GSM top duplex board - CERTIFICATION Care labeling Yes - Manufacturers test certificate for synthetic Yes - 4/6 (Plastic) slide fastners or synthetic hook and loop fastners used in the garment shall be provided to buyer on demand. Manufactures test report for reflective material used for printing of departmental identity to specification no. EN 13356-2001 High Visibility accessories for non professinal use shall be provided to buyer on demand. Yes - Test certificate of Retro Reflective tapes certified by the manufacturer or any International Laboratory certifying that the reflective tape confirms to EN 471-2003+A1:2007 shall be provided to buyer on demand. Test certificate should specifically mention about the batch/Lot number and manufacturers marking and product code on it. Yes - Test reports to be provided to buyer on demand Yes - Purchase document for co-relating the luminous material and Background Material used in the manufacturing of the supply shall be maintained by manufacturer and same shall be provided to buyer on demand. Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 5/6 1 Dinesh Babu K 335512

1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 400 30