Providing and Laying PVC flooring and Internal painting

Amount

Providing and Fixing homogenous 2mm Thk PVC Poly Vinyl Chloride Sheet in flooring & skirting in approved patterns on a smooth & damp proof base with rubber based adhesives of approved quality & manufacture like Dunlop S-758, Fevicol SR 998 or equvalant including rolling with lighter wooden roller weighing about 5kgs all complete as directed by EIC in approved color & shade with 2.0mm thick sheet, all complete as per specification and as directed by Engineer Incharge.

Scrapping and removing the damaged portions of the existing oil-bound distemper (admeasuring more than 0.10 Sqm. each in area) from the distemper-painted walls and ceilings. This includes the comprehensive removal of coatings such as dry or oil-bound distemper and waterproofing cement paint, old putty. Utilize scrapping techniques followed by sandpapering to render the substrate uniformly smooth, rectifying any defects or abrasions, and finish by scrapping, chipping, sandpapering, washing with water, etc.. Subsequently, apply a water-thinnable cement primer of Asian Paints, Berger makes or the equivalent of the approved brand in two or more coats with a VOC concentration not surpassing 50 grams per liter to ensure adherence to environmental standards addressing any scratches or imperfections. Address any surface anomalies/irregularities on the exposed original plastered surface and prepare the surface by applying one or more coats of wall care putty manufactured by M/s Birla Cements or M/s J.K. Cements or with an appropriate wall care putty/Plaster of Paris/ Lappam/putty base, and leveling

and finishing the surface smooth to match with adjacent areas at all floors, heights and locations including the cost of materials, labor, scaffolding, tools & plants etc., all complete as per specifications and directions of Engineer-in-charge Note: the quantity of wall care putty will be measured and paid for separately under relevant Item

Finishing with Epoxy paint (two or more coats) at all locations and heights, prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. The contractor shall remove all existing paint by sand paring, ensuring a smooth surface. Any cracks or holes must be filled with an approved crack filler to achieve a uniform surface. After surface preparation, apply putty as needed to further smooth the surface. The putty should be of a quality that is compatible with epoxy paint. Only approved brand epoxy paint for the final coating. The paint must be applied evenly and thoroughly to cover the entire surface of the laboratory walls. The contractor is responsible for providing all labor, materials, tools, and plants necessary to complete the work as per the specifications, all complete as per specification and as Directed by Engineer Incharge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete WallCare Putty, or an equivalent approved brand, shall be used for wall surface preparation, ensuring a smooth, water-resistant finish with superior whiteness and durability. The putty must be white cement-based, with Extra HP polymers to prevent moisture penetration and flaking, and should be a certified Green Product with zero VOCs. Surface preparation involves removing loose material with sandpaper or a wire brush, followed by moistening the wall. Mix the putty with 36-38% clean water to form a paste, apply the first coat with a putty blade, allow it to dry for at least 3 hours, and then apply the second coat. After drying, remove any marks with a moist sponge or gently rub the surface with a putty blade. The putty should provide extensive coverage, a superior refractive index, and be paint-friendly, with anti-carbonation properties to resist dampness on the painted surface, at all heights, lead and lift as per Specification and as Directed by Engineer Incharge.

General Note- 1. Contractor shall inspect the site to acquaint with the site condition as welll as security condition at AMD. 2. The rates shall include cost of tools and tackles, manpower including wages, liveries, all wastage and taxes, GST, labour cess, income tax etc, as applicable but exclusive of EPF & ESI. EPF & ESI are reimbursible as per relevant clause.

RC CONSTRUCTION (BID ID -3136375)