SPL REPAIR TO BLOCK NO 141 (OR MD ACCN) MPE, 4TTR, 1STC AND PROVN OF 06X OXYGEN PORT WITH SUCTION AT MI ROOM OF MH UNDER GE (WEST) JABALPUR

Amount

Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

M&L for 15mm thick rendering on concrete/brick surfaces in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed . (Note:- WPC shall be measured and paid saperately)

M&L for 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all as specified and as directed .

M&L for applying three coat of white wash as in ceilling on newly plastered surfacces including preparation complete all as specified and as directed.

M&L for applying two Coats of oil emulsion distemper over a coat of chalk whitening primer over 3 mm thick wall care putty on wall plastered surfaces including preparation complete all as specified and as directed.

M&L for applying Two Coats of Cement Base Paint over a coat of alkali resistant primer on Newly Plastered Surfaces of external Walls including preparation complete all as as specified and as directed.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces of old undecorated surface of walls and applying two coats of cement base paint on external wall over a coat of alkali resistant primer complete all as specified and as directed. Note:- Curing shall be done before and after applying of paint.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces of old undecorated surface of walls and applying two coats of oil bound distempered over a coat of chalk whitening primer over 2mm thick wall care putty on wall complete all as specified and as directed

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of (white or tinted) on old painted wooden surfaces of any description over 10 cm width or girth including preparation complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of (white or tinted) on old painted steel surfaces of any description over 10 cm width or girth including preparation complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and as directed.

M & L for RCC (1:2:4) nominal Mix using 20mm graded stone aggregate as in chajjas,parapet facia etc complete all as specified and as as directed.

M&L for RCC -M-25 ( nominal mix) using 20mm grades stone aggregate as in Fins, fascias, louvers,parapets, and railings exc.60cm in height, newels, balustrade, and the like complete all as specified and as directed.

Use and waste of form work to faces of walls, retaining walls , abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter surface fair finished complete all as specified and as directed.

Use and waste of form work to Chajjas and similar items including edges etc complete all as specified and as directed.

S&F for Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed. Note : The reinforcement shall be welded with existing reinforcemnet after dismantaling of RCC Chajjas/Parapets etc.

Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m.complete all as specified and as directed.

M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including flashing and junction of parapet,etc,and surface painting with a layer of blown bitumen of any penetration applied hot @1.70 kg per sqm.blinded with grit or pea size gravel @ 0.006 cu.m per sqm and lightly tampered (area of flashing etc.shall be added to the roof area) complete all as specified and as directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and as directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs-

(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.

(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

(c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame.

(d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:4 for floor finishes complete all as specified and as directed.

S&F for cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished complete all as specified and as directed

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and as directed.

Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and as directed. ( Note:- WPC shall be measured and paid separately)

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg per sqm per coat. Including polythene film, black , 50 micron laid in floors complete all as specified and as directed.

M&L for lean concrete (1;7:12) Type F2 (using 40mm graded stone aggregate) laid compacted complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs as in covet fillet complete all as specified and as directed.

S&F for GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as sunken spout complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed.

Demolition of Brick work or Stone/boulder Masonry built in Cement Mortar including all quoins arches pillars etc excluding ashlar facings precast concrete articles complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Dismantaling floor hearth or wall tiling/china mosaic including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250, 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including 10 mm thick rendering in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed..

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Machine cut Cudappha stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed

Material and labour for 20- 25 mm thick machine cut kota stone flooring laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 including rubbing and polishing complete all as specified and as directed.

M&L for 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations,filling and mass concrete and sub base to floor finished even & fair complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.

M&L for 50 mm thick Sand cushion under floors complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately)

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and as directed.

S&F for 105x60 mm pressed steel door frame with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete, all as specified and as directed.

S&F for 125x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat including locking arrangment for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including complete all as specified and directed. Note:- sheet glass, wire cloth shall be measured and paid seperately.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and as directed.

S & F for 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and as directed.

S & F for 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) fitted to chowkhats for doors etc complete all as specified and as directed.

S&F for PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube in opening as per specificationn complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fixing in the frame at site as per specification and drawing. Make Rajshree

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and as directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and as directed

S&F, for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F, for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and as directed.

S&F for continuos (piano) hinges,mild steel bright finish or electrogalvanised,width of flaps 30 mm complete all as specified and as directed.

S&F for 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F for 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F for 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and as directed.

S&F for 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and as directed.

S&F for 125mm long hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and as directed

S&F for stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

S&F in repair for 9 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work complete all as specified and as directed.

S&F in repair for 18/19 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work complete all as specified and as directed.

S&F for 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F for 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified and as directed.

S&F for 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and as directed.

S&F in repairs mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified.

S&F in repair aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and as directed.

S&F in repair MS Peg set of six powder coated complete all as specified and as directed.

M&L for mild steel pipe 25 mm dia Drapery rod fancy type with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE complete all as specified and as directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and as directed.

M&L for treating small article such as stops, covers, gully, gratings and hold fast ends & post backs of chowkat etc with creosote oil, tarred area n exc 0.10 Sqm each complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface of any description over 10 cm width or grith including preparation complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on newly wooden surface of any description over 10 cm width or grith including preparation complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipecomplete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified and as directed.

S & F for 15mm bore Tubes medium grade, galvanised with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors Complete all as specified and as directed.

S & F for 20mm bore Tubes medium grade, galvanised with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors Complete all as specified and as directed.

S & F for 25mm bore Tubes medium grade, galvanised with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors Complete all as specified and as directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth Complete all as specified and as directed.

S& F in repairs 15mm bore Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repair for 15mm chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts complete all as specified and as directed.

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete all as specified and as directed.

S&F in repair C P glass corner shelf set of three single including Screws and CP bracket complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 600 mm long complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified and as directed.

S&F in repairs for Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and as directed.

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and as directed.

S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and as directed.

S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and as directed.

S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and as directed

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and as directed.

S & F in repairs Towel ring brass chromium plated round type fixed with screws and wooden or plastic cleats complete all as specified and as directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and as directed.

S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and as directed.

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and as directed.

S&F for CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flange end bedded in red lead cement and fixed complete all as specified and as directed.

S&F for CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and fixed complete all as specified and as directed.

M&L for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.

S&F for 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with access doorrubber rings ljoits fixed to walls complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of with access door complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and as directed.

M&L for 110mm dia PVC(SWR) Tee with access door etc complete all as specified and as directed

M&L for 75mm dia PVC(SWR) Tee with access door etc complete all as specified and as directed

S&F for PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified and as directed.

S & F stack clamps out of 50mm x 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc complete all as specified and as directed.

S&F Bed head panel 2 feet size BHP as per specification and requirement of site complete all as specified and as directed.

S&F for Oxygen port (Oxygen Outlets) gas specific for the services indicated to accept only compatible quick connect Geometric index type steel adapters as HTM/NFPA standard as per drawings and as required complete all as specified and as directed.

S&F for suction port ( vaccume outlets) gas specific for the services indicated to accept only compatible quick connect Geometric index type steel adapters as HTM/NFPA standard and as required complete all as specified and as directed.

S&F for Oxygen flow meters with mask made from brass , chrome plated . It is shall be back pressure compensated type having houising of polycarbonate autoclavable rusable flow range 0-15 LPM fitted with matching adopter for oxygen outlets point and humidifier shall be compatible with flow meter and rusable and as per specification and as required with suitable steel adopter complete all as specified and as directed.

Supply and laying of 12 OD copper pipes for medical gases complete with elbows, flanges,specials,other fittings and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degressed material confirming to BS-EN 1057/13348, of copper pipe with colour coded complete all as specified and as directed.

Supply and laying of 15 OD copper pipes for medical gases complete with elbows, flanges,specials,other fittings and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degressed material confirming to BS-EN 1057/13348, of copper pipe with colour coded complete all as specified and as directed.

Supply and laying of 22 OD copper pipes for medical gases complete with elbows, flanges,specials,other fittings and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degressed material confirming to BS-EN 1057/13348, of copper pipe with colour coded complete all as specified and as directed.

S&F for vaccum Jar with rubber tubings complete with regulator capable with controlling vaccum between 0 to 760 mm hg and polycarbonate autoclavable rusable type receiver jar of not less than 600ml, vaccume regulator shall have a dial gauge on/off switch, valve control knob and as per specification and as required with suitable steel adopter complete all as specified and as directed.

S&F for isolation valves 15mm are to be ball valves with stainless stell ball and PTFE or teflon seal. They shall be suitable for a workinng pressure of 10.2 kg/cm² gauge. Valves shall be fitted in to the pipe line by means of capillary hard soldereo joints containing silver . It should be open/close with help of handle with rotation of 90 degree complete all as pecified and as directed.

S&F for isolation valves 22mm are to be ball valves with stainless stell ball and PTFE or teflon seal. They shall be suitable for a workinng pressure of 10.2 kg/cm² gauge. Valves shall be fitted in to the pipe line by means of capillary hard soldereo joints containing silver . It should be open/close with help of handle with rotation of 90 degree complete all as pecified and as directed.

S&F for vaccum tube PVC transparant and heavy duty including necessary fittings complete all as specified and as directed.

S&F for high pressure tubes (with nut nipple probe and in 3.0 mtr length including necessary fittings complete all as specified and as directed.

M & L for modular switch 1 way 6 Amp 1 Module complete all as specified and as directed.

M &L for Modular Socket 6A 2/3 Pin universal 2 module complete all as specified and as directed.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully Main switch and Distribution boards any make and size complete all as specified and as directed.

Taking down carefully ceiling fan/Exhaust Fan of any sweep and size and depositing to MES store and Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and as directed.

M&L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and as directed. Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M/L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and as directed . Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.00 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

(a) One light point/Bell point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One socket point controlled by one switch on same board.

(d) One socket point controlled by one switch on Independent board.

Description all as per item No 153 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and as directed.

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and as directed.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and as directed.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and as directed.

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and as directed.

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and as directed.

S & F in repair fan regulator Step type of polycarbonate complete all as specified and as directed.

Supply and fixing in repair of LED lamp rotary type/holder type of 9 watt all as specified and as directed.

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 12 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt with fixing arrangements on wall complete all as specified and as directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), complete all as specified and as directed.

S & F in repair of LED Decorative /mirror light fitting 10watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and as directed.

S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified and as directed.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door complete all as specified and as directed.

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and as directed.

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete all as specified and as directed.

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and as directed.

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and as directed.

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and as directed.

Supply & Fixing in repair modular AC box (earth plug socket) complete with 01 number single pole MCB 20 Amps complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supplying and fxing testing the water heater storage type 25 litres, BEE Five star Rated capacity and after connecting electric and water connection and screwing nuts and bolts , anchor hold fast to fixed on wall and making good the disturbed surface, complete all as specified and as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan area and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick Complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Supply, laying & fixing double wall corrugated (DVWC) pipes 50 mmn outer dia and 38 mm inner dia made of high density polythethyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc complete all as specified and as directed.

M/s Om Infracon (BID ID -3321909)

M/S Modern builders (BID ID -3329104)

chandra builders (BID ID -3321848)