Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC 11 71 KAVERI PATH MANSAROVAR JAIPUR | JAIPUR | JAIPUR | RAJASTHAN | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹39.8 L+₹6.0 L (17.8%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹40.6 L+₹6.8 L (20.1%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹44.8 L+₹11.0 L (32.5%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹46.0 L+₹12.2 L (36.2%)Rejected-Finance 1542 URBAN ESTATE II HISAR 125 005 HARYANA | HISAR | HARYANA | 125005 | L5 | Rejected-Finance Being L5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
24 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (W)
GE (W) HISAR HISAR MIL STN PIN-125006
CA NO. GE (W)/HSR-55/2023-24 REPAIR OF JOINERY OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR
2024_MES_638222_1
CA NO. GE (W)/HSR-55/2023-24
Open Tender
Civil Works
Item Rate
270 days
HISAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (W) HISAR
₹90,000
Yes
HISAR
27 Mar 2024
19 Jan 2024
26 Feb 2024
19 Jan 2024
24 Feb 2024
10 Feb 2024
20 Jan 2024 - 27 Jan 2024
27 Jan 2024
Amount
Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (With out taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each resecuring, easing and adjusting and refixing in the same opening complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.
S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.
S&F 18/19mm thick prelaminated PVC solid board with one side decorative choice laminated and other balancing while laminated includuing fasting with solvent chemical as required at site fixed with screw etc including brass nobe complete all as specified and directed.
S&F flush shutter 35 mm thick, solid core construction, with block board core and both face covered with decorative face veneer with lipping/frame to match plywood face panels complete all as specified and directed.
S&F 2nd class Hard Wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass complete all as specified and directed. etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a)
Providing 30mm thick factory made 100% solid WPC (Wood polymer composite) Solid Plain/Prelam/Enrouted Plain/Enrouted Painted flush Door Shutter of required size comprising of Virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium carbonate and natural fibers (Wood Powders/rice husk/Wheat husk) and Non toxic additives made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650 Kg/cbm manufacture by an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw withdrawl strength of 2000 N (face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread flame of Class A category with Property of being Termite/Borer Free, Water/Moisture Proof, Fire Retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. For WC/Bathroom/Toilet/ Kitchen/ Balcony Doors complete all as specified and directed.
Providing and Fixing factory made 100% Solid WPC (Wood Polymer Composite)- Door frame of size 75mmx50mm made from wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium carbonate and Natural Fibers (Wood Powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & Screwed with full body threaded star headed screws having minimum frame density of 780 Kg /cbm manufacture by an ISO 9001-2015 certified Company, having good screw holding capacity (Screw withdrawal strength of (Min 990N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Draft Fasteners/Hold Fast of required dia and length for WC/Bathroom/ Toilet and external uses complete all as specified and directed.
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather roof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed.
S & F 30mm flap of Continuous (piano) hinges, mild steel, bright finish or lectrogalvanised complete all as specified and directed.
S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.
S & F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters including necessay arrangements like welding etc complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.
S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.
S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S&F extruded aluminium alloy ,anodised ,sliding door bolt 150 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S & F butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.
S&F in repair mild steel window handle left/right 150 mm complete all as specified and directed.
S & F in repair mild steel window stay of minimum 200 mm length complete all as specified and directed.
S&F in repair rubber beading to aluminium door / window / aluminium frame and like of best quality complete all as specified and directed.
S&F Powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.
S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 complete all as specified and directed.
S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repair door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
Hacking out old broken glass exc 1.5 sqm from wooden / metal frames glazed with putty or fixed with beads complete on any storey of the bldg complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.
S&F 3 mm thick figured glass pin head type in square n.exc 0.5 sqm each pane complete all as specified and directed.
S&F sheet glass 4 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.
S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.
M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.
M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces complete all as specified and directed.
S & F in repair mild steel, 4-lever, mortice lock, vertical type, size 100mm complete all as specified and directed.
Welding in repairs n.exc 6mm thick metal and n. exc 2.50cm in length complete all as specified and directed.
S & F mild steel 25 mm dia drapery rod, decorative type, with PVC coating and fixed in repairs complete all as specified and directed.
S & F SS bracket and side shoulder ,decorative, superior quality, suitable for 25 mm dia drapery rods complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair complete all as specified and directed.
S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair.including taking down existing door and refixing the after necesary repair complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces in patches, finished fair and even complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or conc surfaces in cm 1:6 finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over and including one coat of 1 mm thick wall care putty complete all as specified and directed.
M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over one coat of primer complete all as specified and directed.
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
M&L taking down Aluminium door & refixing the same after necessary adjustments and repair including providing necessary beading complete. Note : Defective parts will be replaced and measured seperately in relevant item complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:4 including Dismantling of existing tilesin complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 350x250 x7/450x350x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.
M&L for Making good with cement mortar (1:4) under cills or over arches, lintels and bressummers.including allpinning when necessary complete all as specified and directed.
S&F 5 to 8mm thick hollow PVC wall panelling,super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L'and U section for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls complete as specified and directed including dismantling old panelling /lining etc
T/D Steel window with or without glazing bars and ventilator n.exc 1.50 Sqm each.ncl repair of jambs with cement mortar complete all as specified and directed.
T/D Steel window with or without glazing bars and ventilator exc 1.50 Sqm but n.exc 4 sqm each.ncl repair of jambs with cement mortar complete all as directed and directed
S&F Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.
S&F Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.
M/S RR ENGINEERING CO
PRINCE CONSTRUCTION
NAVIN KUMAR
m/s krishna engineers1
Shiva Constructin Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .