New installation of 1000 mm conveyor belt with 90KW drive head of length 670 mtr at 21El/21R in RIV seam of Khottadih Colliery.

Amount

New installation of 1000 mm conveyor belt with 90KW drive head of length 670 mtr at 21El/21R in RIV seam of Khottadih Colliery. (Inclusive of EPF/CMPF)

Complete Installation after Transportation & with Necessary Fabrication of 670 mtrs 1000 mm width, 100Kw Belt Conveyor at 19EL/21R in R-IV Seam which includes 1) Transportation, Carrying from Surface & Fitting of Discharge Head (800 X1400 mm) with Deck Plate, Chute, scrapper and 08 nos of Girders (125 X 250 mm) - 3.0 MT 2) Transportation, Carrying from Surface & Fitting of Drive head with Gear Box & Motor – 8 MT 3) Transportation, Carrying from Surface & Fitting 1 nos. of load table 4.5 m long for Tail End& decking plate – 1.5 MT. 4) Transportation & Fitting including grouting of Tail end Assembly with V-Scraper & Decking fabrication & Fitting - 1 MT 5) Transportation, Carrying from Surface & Fitting Loop take up assembly with Winch. & Bend Pulley frame - 3.0 MT, 6) Fitting Complete 670 mtr Structure with Top & Bottom Rollers after transported from surface to work site laying ,and, fitting @ -68Kg-per-mtr, - 45.56 MT

Fabrication of one no of hopper 4.5 mtrs long which includes labour cost, oxygen, DA and welding

Fabrication of one no. of tail-end assembly which including labour cost, oxygen, DA and welding

Fabrication of loop take up assembly with trolley which including labour cost, oxygen, DA and welding and making 4 nos. of pullies

1000 mm PVC Belting transportation from surface, laying, jointing tensioning trail run etc.

1)Holding down bolts of Drive Hd & Stucture , Loop Take Up triangular Frame . 18 times – 40Nos 2) 17 Times Belt extension(09 Nos each time) -162 nos

Transportation of ACB, starter & PVC cable, Pull Cord, Signaling System etc surface to site.

17 times belt extension including Tail End Assembly and hopper Shifting - 14 hds. x 1.5 shifts = 21 hds. for one extension, semi Skilled – 6 hds. @Rs.1351.56/- + un skilled 15 hds. @Rs.1280.95/-

Fencing of Drive Head, Loop Take Up and Tail End ( Tail End fencing 18 times)

Consumable Nut & Bolt 1/2” X 11/2” – 270Kg, 5/8 “X 2“ -50 Kg, 5/8 “X 21/2“ -10 Kg, Plain washer- 40Kg

Hanging by vartical support 50 mtr. length conveyor structure providing M.S. channel

Fabrication of drive head assy. including coupling & welding & machining of bearing position of drive and driven drums

Total impact of GST for the purpose of CTC

NANDI ENTERPRISE

BABLU SINHA