Supply Erection Commissioning of 4 Nos. 35 Cs. VT Pump Sets alongwith 4 No. 200 HP motors and allied accessories at Aurangpur Link Drain Pump House in Water Services Mechanical Division Jhajjar.

Supply, erection & commissioning of 35 Cs. VT Axial/ mixed flow VT pumps of 960 RPM having static lift 21 feet including Y body with MS delivery pipe along with delivery U bend & siphon valve of minimum thickness 8 mm with both side flange welded with epoxy coating, incl. welding etc. complete in all respect as per site requirement. (As per latest technical specifications approved by I&WR Deptt. Haryana ).

Supply, erection & commissioning of solid shaft 200 HP, LT Motor, 3 phase 415 V induction Motor 960 RPM suitable for 35 Cs Axial/ Mixed flow VT pump complete in all respect as per site requirement (As per latest technical specifications approved by I&WR Deptt. Haryana ).

Supply erection & commissioning of MS delivery pipes 508 mm inner dia alongwith MS bend as per site condition made of 6 mm thick MS Plate both end flanged (in>=6 mtr piece) as per approved specification & make. (i/c SS Nut-bolt, rubber Sheet 1/8" & other fitting accessories required for fitting of pumps)

Providing deep complete double side chemical earthing or plate earthing with 2 earth pits on both sides of pump house by boring & lowering 1.5" GI pipe, filling boring with charcoal, copper strips, salt & fixing base plate of chemical earthing, connecting this main earthing through copper strips /wires up to motors & panel confirming to IS- 3043 as per site requirement.

Supply, erection and commissioning of Motor Control Centre /LT Panel 1600A as per IP-54 with incomer ACB of 1600Amp with 04 Nos outgoings each of having MCCB of 630Amp with 4 nos. Fully Automatic ATS starters of 200HP complete in all respect like relays, indicators, timers etc. with other allied accessories likes indicators, meters, push buttons, bus bars etc. as per design of Motor Control Centre with capacitor bank of 300 KVAR in 8 Steps with incomes and 02 nos outgoings MCCB suitable for EOT crane and lighting load with a stand of MS Channel/angle having 2 feet height from floor level & as per approved specification of deptt. (as per Annexure-C).

Providing and Laying LT Armoured PVC Aluminium Cable of size 150 Sqmm 3 core with Aluminium thimbles at both end conforming to IS 7098-1988 as per approved makes.

Providing and Laying LT Armoured PVC Aluminium Cable of size 630 Sqmm 3.5 core with Aluminium thimbles at both end conforming to IS 7098-1988 as per approved makes.