Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC A 1 INDUSTRIAL ESTATE BRAHMAPUR 760008 DISTRICT GANJAM ODISHA | BRAHMAPUR | GANJAM | ODISHA | 760008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹43.6 L+₹1.6 L (3.76%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹45.3 L+₹3.3 L (7.88%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹46.8 L+₹4.8 L (11.4%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹46.8 L+₹4.8 L (11.4%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
Tender Value
Refer Docs
EMD Value
₹78,000
Closing Date
31 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
PROVISION OF SINGLE LIVING ACCN FOR 01 X JCO AND 06 OR STAFF OF NFS NODE UNDER GE I GOS
2023_MES_613223_1
8000/51/2023-24/0950/E8
Open Tender
Civil Works
Item Rate
180 days
GOPALPUR MILITARY STATION
As per tender docus
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER I GOS
₹78,000
Yes
8 Nov 2023
11 Aug 2023
1 Sept 2023
11 Aug 2023
31 Aug 2023
24 Aug 2023
Amount
Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre deep including getting out, complete all as specified.
Excavation in trenches in soft / loose soil exceeding 1.5 metre wide & Not exceeding 3.0 metre deep including getting out, complete all as specified.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete , complete all as specified.
Removing surplus excavated material (soil) to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point, including spreading, complete all as specified.
Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified.
M&L for Anti termite treatment of soil Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified.
M&L for Anti termite treatment of soil treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified.
M&L for Anti termite treatment of soil treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified.
M&L for RCC M-25 Design Mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified.
M&L for RCC M-25 Design Mix in Columns, pillars, piers, posts and struts,complete all as specified.
M&L for RCC M-25 Design Mix in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified.
M&L for RCC M25 Design Mix in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, intels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail- ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon- tal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified.
S&F TMT bars 5 mm and over upto and including 10mm dia in stirrups, soacers and binders bent to shape required, including binding with mild steel wire not less than 9mm dia., complete all as specified.
M&L for brick work with Fly ash bricks, straigth or curved on plan exc 6m mean radius built in cement mortar 1:6 , complete all as specified and as directed.
M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement , complete all as specified.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified.
M&L for rendering 5mm thick Plastering on RCC surfaces of walls/ceilings in CM 1:4, complete all as specified.
M&L for preparing Surfaces plastered or unplastered new surfaces on walls and applying two coats of acrylic washable distemper over a coat of Primer on wall, complete all as specified.
M&L for three Coats of White wash on Ceiling Surfaces all as specified and directed
M&L for two coats of cement based paint over One coat of primer, complete all as specified.
M&L for Waterproofing treatment to roof slabs. (a) a LAYER OF 10MM THICK CEMENT PLASTER IN Cm 1:3 mixed with polymer based liquid water proofing compound. (b) Bitumen Based promer @ 0.3kg/sqm (c) APP modified polymeric membrane laid and bonded to sub-strata with heat process (d) APP modified polymeric membrane shall be covered with bitumen based alluminiun paint @ 20Kg/sqmm in two coats.
M&L PCC 1:3:6 type C-1 50mm thick as in plinth protection, complete all as specified.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface100mm Thick Below Plinth Protection, complete all as specified.
M&L Machine cut Kota stone slab flooring 20-25 mm thick over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing polishing & rounding to edges complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick Sqiare / rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles , complete all as specified. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment (ii) Rendering shall be measured and paid separately under respective items.
M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finished in CM 1:6 for laying of floor tiles as , complete all as specified.
M&L for rendering 10mm thick in cement mortar 1:4 for fixing of wall tiles , complete all as specified.
M&L for 100 mm thick Cement concrete 1:5:10 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.
S&F factory made uPVC white colour casement window single panel with S.S. friction hinges (300 x 19 x1.9mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9+ 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 1.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), PVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-incharge. Note: for uPVC frame, sash and mullion extruded profile shall be acceptable Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (A) Area exc. 1.00 sqm AND n.eXC 2 each (Note: The unit rate quoted by contractor shall include cost of glass and all other connected accessories)
S&F factory made uPVC white colour casement window single panel with S.S. friction hinges (300 x 19 x1.9mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9+ 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 1.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), PVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-incharge. Note: for uPVC frame, sash and mullion extruded profile shall be acceptable Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (A) Area not exc. 1.00 sqm each (Note: The unit rate quoted by contractor shall include cost of glass and all other connected accessories)
S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm all as specified and directed.
S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed
S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed
M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
M&L Second class hard wood 35 mm thick factory made plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.
S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.
S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.
S&F Butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and directed.
S&F Butt hinges, 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and directed.
S&F s extruded aluminium alloy handles fabricated type anodised of 100 mm size complete all as specified and directed.
M&L for second class hard wood plain fillets, square, rectangular or triangular in sections wrought surfaces sectional area exc 3 sqcm and not exc 6 sqcm secured with nails or brads complete all as specified and directed
S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
S&F PVC waste pipe for urinal/WHB etc all as specified and directed.
S&F s CP 32 mm bore dia waste coupling of (half or full threaded) etc complete all as specified and directed.
S&F s Chromium plated grating doom 100 m dia fixed in floor in CM 1:3 complete all as specified and directed
M&L s for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed.
M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.
S&F Plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook , complete all as specified.
S&F bib tap 15 mm bore, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S& F 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and as directed
S& F CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed.
S&F angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.
S&F of stainless steel soap dish, of standard size and shape of approved makes complete all as specified and as directed.
S&F chromium plated toilet paper holder with flap complete all as specified and as directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F cabinet mirror, box type of size 350 x 450 mm of colour as approved fixed to wall complete.
S&F rotational moulded polyethylene water storage tank in white colour triple layer (cylindrical vertical with closed top)500 litre capacity hoisted and fixed in position complete all as specified and directed
S&F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified.
S&F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified.
M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting not exceeding 10 cm girth complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.
S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.
\S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.
S&F PVC (SWR) TEE any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) Vent Cowl any radius of 75 mm bore with complete all as specified and directed.
S&F PVC (SWR) Vent Cowl any radius of 110 mm bore with complete all as specified and directed.
S & F 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
Sand filling under floors or infoundations including watering and consolidation, complete all as specified.
S & F in repairs 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed.
Surface dressing not exc 15cm deep in soft/loose soil , complete all as specified.
Surface excavation in soft /loose soil n exc 30 cm deep and averaging 15cm deep and getting out , complete all as specified.
M&L for 100mm thick PCC 1:4:8 type D-2 in fondation filling and mass concreting , complete all as specified.
M&L 20mm thick screed bed or bedding layer of in CM 1:4 for laying floor finish, , complete all as specified.
M&L for chequred cement concrete tiles 20cmX20cmX22-25mm thick , set , jointed and pointed in neat cement slurry with grey cement & no pigment , complete all as specified.
M&L for PCC 1:3:6 type C-2 ( using 40mm graded stone aggregate) as in foundation , fillinmg and mass concrete ,, complete all as specified.
M&L for PCC 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in ,bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe with concrete after they are laid and tested complete all as specified.
M&L for 150mm internal dia RCC NP3 pipe laid in any length , jointed with cement concrete 1:1 laid in trenches and tested ,, complete all as specified.
M&L for PCC 1:2:4 type B-2 ( using 40mm graded stone agg) as in surface channel benching etc laid to shape and slope including all formwork etc. , complete all as specified.
M&L for PCC 1:2:3 type B- I ( using 20mm graded stone agg) as in coping weathering slightly rounded or chamferred angles and throating use of formwork staight or curved , complete all as specified.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds mitered stopped ends etc , complete all as specified.
M&L for 15mm thick rendering on brick work in cement mortar 1:4 using water proofing compound @3% by wt of cement incl finishing the surface even and smooth without using extra cement , complete all as specified.
Supply only integral water proofing compound , ISI marked, complete all as specified.
M&L for RCC cover slab for manholes type B- complete all as specified and , 1:2:4 ( using 20mm graded stone agg) set in cement morttar 1:4,, complete all as specified.
M&L cement concrete 1:3:6 type C-2 using 40mm graded aggregate as in surface channels incl necessary form work , complete all as specified.
Supply and providing sand cushioning with dry clean sand 8 cm below cable and 15 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.
Supply and laying Fly ash bricks in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed.
Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade 10 sqmm 2 core laid in trenches/ along poles, ducts or through sleeve with following sizes. Note : Earth work, sand cushioning and bricks will be measured and paid separately . Make : Gloster/Havells/Polycab
Supply and fixing street light fitting LED type 35 Watt new generation energy saving powder coated pressure die cast aluminum high powder with heat resistant toughened glass with lens & IP65 with high power LEDs as light source and electronic driver with GI tubing 40mm dia, mounting bracket with its clamp incl two coats of synthetic enamel paint over a coat red oxide primer and with all accessories, incl connecting of with 2 run of flexible copper conductor of size 1.5 sq mm cable from fitting to junction box, testing & commissioning complete all as specified and directed. Make : Surya/Philips/Crompton Greaves
Supply and laying in trenches Galvanised steel (Gl) tubing 'Medium grade' with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) with cutting, screwing, making forged bends on piping as required. insertion of Connectors where required or directed. including cutting through walls, floors, etc. and their making good . all as specified and as directed for 50mm bore dia. (Note : Earthwork shall be measured and paid saperately under relavent Item) Make : Jindal
All as per item no. 110 but 25mm bore dia
S&F Gun-metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe gate valve of 50 mm dia . Make: Zoloto/Bir/Kirloskar
All as per item no. 110 but 25mm bore dia
(Bath stool PVC)( FD-E6/MAP/07): The overall size of the bath stool PVC shall be 400mm L x 300mm W x 250mm H.The bath stool PVC shall be made up of 5mm thick PPCP m,aterial. The bath stool PVC shall have centre leg of dia 25mm. The four leg shall be in arc shape and of size 100mm x 100mm. The top of the bath stool shall have 3mm x 10mm thick stiffner molded along with the seat in single pieace underneath. The weight of the bath stool shall not be less than 1.3 Kgs. Make AMKO/Cello Brite.
( Chair Easy) (FD-229): Dimension : Overall size shall be 510mm long, 575mm wide and 720mm high. Description : a) All wood to be used shall be 1st class hard teak wood b) PVC hard rubber ring of dia 25mm shall be provided to bottam of each leg with 20mm long screws. c) Caning shall be done in true godrej pattern with virgin plastic cane of 2mm wide, 0.6mm thick half round gola type weighting not less than 6 gms in ten running meters with border woven with 4mm thick cane. Rest all specification and dimensions are as per drg. FINISH: The chair shall be polished in high glass melamine polish in walnut shade after preparation of surface.
(Chair Writing): All woodwork shall be of 1st class teakwood of specie Tectona Grandis conforming to IS-1331:1971 free from dead knots and moisture content as permissinle as per IS-287. Canning of the chairs shall be of Godrej pattern with 2mm and 3.5mm approved qulity of plastic cane and holes to be covered by 3.5mm wide cane. The canning used for seat has high tensile strength as specified IS:5378 Part II/1990, Cane breaking strength=3000kg/mm2(min) % Elongation at break =25%. TW triangular brackets of size 60x60x25mm thick both ends chamfered shall be screwed on the legs/side rails joint below seat for both rear and front legs ie 4 bracket per chair. PVC rings to be screwed of appropriate size to be provided to all the four legs of the chair.All exposed surfaces shall be french polished.
(Bed hard steel)(FD-E6/MAP/08 R) : All as shown on drg and specification Conduit pipe shall be 38mm sq 1.6mm thick for main frame and 19mm sq 1.6mm thick for inner frame for head and foot board 65mmx25mm 1.6mm thick for long rail. 25mm sq 1.6mm thick for stiffener under 12mm plywood shall be used Prelaminated particle board 18mm exterior grade for head and foot board with PVC edging 1mm thick. Finish : All steel surface shall be black powder coating Rest all as shown on drg.
(Table 3x2 w/drawer)( FD-224): All as shown on drawing. Overall size shall be 900mm long ,600 mm wide and 760 mm high. All wood to be used shall be 1st class hard teak wood (MP) legs shall be 55 mm x55 mm in section at top and 35mm x 35mm section at bottom , and shall be joined together on sides and back by 25 mm x 110 mm in section top rails.Front Rail shall be of 19 mm x110 mm stiffner of 25 mm x 40 mm in section shall be provided at 100 mm from bottom of legs joining legs in short sides. a long stiffner of 25 mm x 40 mm in section shall be provided in the midle of short stiffners, joining short stiffner at 100 mm from bottom A drawer shall be provded on the right side of table in the front top rails. The drawer shall be 300 mm wide. Front of drawer shall have 19 mm thick wooden planks. A partion of 6 mm thick plywood , 75 mm high and 3000 mm long shall be provided at 75 mm from in side of front of drawer. A stiffner 25 mm x 40 mm in section shall be provided at the bottom of the front top raill to support front top rail. (Two numbers (one on each side of drawer ) 25mm x 25mm in section track rails shall be provided in which a groove of 12mm x 12mm in section shall made for sliding the guide rails of drawer in such a way that drawer runs smoothly. A knob as directed by Engineer- in- charge shall be provided to front of drwer . Bottom of drawer shall be . . Rest all specification and dimentions are as per drg.All wooden surface shall be polised with high gloss melamine polish in walnut shade after preparation os surfaces.
( Teapoy)(FD-386): All as shown on drawing. Overall size shall be 600mm long ,450mm wide and 540mm high. All wood to be used shall be 1st class hard teak wood ,irrespectiv of what is shown on drg,the top of table shall be 18mm thick BWR plywood of grade A with 1mm thick laminated sheet pasted over the ply withmarine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading and center stiffner of size 20x40mm shall be provided at center of side bottom rails for extra support.PVC hard rubber shoe of 25mm dia shall also be provided to bottom of each leg with 20mm long screw . Rest all specification and dimentions are as per drg.All wooden surface shall be polised with high gloss melamine polish in walnut shade after preparation os surfaces.
(Charpoy Steel PBOR)( FD- E6/MAP-/01): Specification: Overall size shall be 1980mm long, 900mm wide and 440mm high. a) The frame of charpoy shall be made of MS hollow section piupe of 16 gauge as per specified sizes mentioned in Drg. b) Top of charpoy shall be of 12mm thick BWR ply of grade-A; Place and fix over the and fix over the stiffeners and cleat with 12 Nos of flat head bolt of 6mm dia, 50mm long nylon insert nut and round washer. c) Each leg of charpoy shall be provided with 32mmx32mmx5mm thick MS plate shall be welded at bottom of each leg. Rest all specification and dimensions are as per drg The charpoy shall be dry powder coated in black after preparation of surface.
(Locker bed side steel)(FD-257) :Overall size shall be 760mm long, 600mm wide and 1100mm high. All steel shall be of 1mm thick in front, back , sides, top and bottom. Legs shall be of U shape channel 100 high and 60mm wide ends plugged with 1mm thick mild steel sheet. The legs shall be welded to bottom of almirah. Half of almirah shall have shelves and other half shall have hanging space. A vertical partition shall be provided dividing the width of almirah in to two halves. Hahging portation shall habe 20mm dia chromium plated steel conduct pipe 1.6mm wall thickness with sockets at 55mm from front of shutter of almirah or 80mm top of almirah as directed by Engineer-in-charge. Two shelves, making three equal compartment shall be provided in the other hall of almirah. Two black steel studs fixed in side of shutter shall be made to shape with 1mm thick sheet and 80mm wide, height being that of shutter shall be provided a directed by Engineer-0in-charge. One number safety type, chromium plated brass haps and staple at 75mmx40mmx3mm shall be provided to front shutter. chromium plated handle 100mm long shall be provided to each shutter as shown on drg. Two 50mm long tower bolt shall be provided to one shutter in the inner side as directed by Engineer-in-charge. Front shutters of almirah shall be side hung with 75mm long bult hinges. All steel surface coats to enamal paint over a coat of primer after preparation of surfaces painting shall be done with spray machine.
M/s Bapujee Builders and Traders
M/s Ats Electricals
DHABALESWAR ENGINEERING WORKS
V.Venkata Ramaiah
M/s MAA BHAIRABI ENTERPRISES
Shree Mahavir Associates
G.KRISHNA MURTHY AND PARTNERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .