CONSTRUCTION OF NEWLY ALLOTTED 5th ADDITIONAL COURT HALL AND SUPPLYING OF FURNITURES IN THE DISTRICT COURT COMPLEX AT NAVANAGAR BAGALKOTE.(Under 2059 Departmental Buildings For the year of 2025-26)

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles above 25 ...

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Of area 3 m² and below

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of sec...

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse s...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of ce...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing IS : 12817 marked stainless steel butt hinges with

stainless steel screws etc. complete : 125x64x1.90mm

Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 125 mm with plate 175x32 mm

Providing and fixing door latch with necessary screws etc complete. - Bright finished brass latch

Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & w...

Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete. Flexible pipe : 32 mm dia

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 25 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 25 mm dia PVC Tee

Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 90 mm long, weighing not less than 93 g

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double s...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Electrification

Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacito...

Supplying wall mounting fan suitable to operateat single-phase 230v AC. supply.300 mm Sweep

Supplying exhaust fan of 1440 RPM of 300mm(12") size with bracket blades complete for light duty suitable to operate on 230V50Hz, AC Supply.

Furnitures Work

Teak wood Horse Shoe Table : Of size overall Length 16'. L-12' X width 2' or 2.5' X Height 2.5' = 2 Nos. & 4' one " U" shape Table, such that when three table joined together and make one Horse shoe t...

Teak wood Chair (Heavy Model): Seat with Teak wood planks or cushion. Made out of Teak wood chair 3" X 1(3/4)" back legs 2(1/4)" X 2(1/4)" front legs chair side bars 3" X 1(1/4)" back with 8 reapers. ...

Teak wood Dias Table : Of size L-6'Xw-36"XH-30". Made out of Teak wood Dias Table leg size 3"x3". Table Top Patti-4"x1.25" and bottom portion shall be 2"x1". The top of the Table shall be provided wit...

Teak wood Ornamental chair with Lobo : ( Rose wood model) Made out of Teak wood, Rear leg of height 4'6" and 2.5"X1.5" section and front leg of height 18" with 2.5" X 2.5" section with curve shape. Se...

Teak wood witness Box : Length 4' X width 2.5' X Height 4', made out of teak wood legs (turning) size 4"X4" with side bars 3" X 2". The height from the ground shall be 6" with 18mm OST. Back jungle wo...

Teak wood Accused Dock : Of size Length 8'X width 3' X Height 4' with wooden platform. Made out of Teak wood leg size 4"x4". Side bars shall be 2"x2". All the side shall be covered with 2"x1" reapers ...

Office Table : (Suprident Table, size 6' x 3') : Of size 6'x3' or 5'x3'. Made out of 18mm MDF one key board and 3 drawers on the right side. Table to be covered with 1mm laminate wherever visible. Har...

Peakcock Chair : (Standard company) Seat, and Back half cushtion with Cloth or Rexin

Office Table : Of size 4' x 2.5'. Made out of 12/18mm MDF one key board and 3 drawers on the right side. Table to be covered with 1mm laminate wherever visible. Hardware of the drawer should be telesc...

Director Cushion Chair : High back chair with seat and back High quality feather touch Rexine. Arms with cushioning. Chair to have ss base with 5 caster wheel legs along with Syncro Mechanisum.

Computer Table : Of size 3'x2' made out of PLPB (Action Tesa or Century brand) Table should consist of 1 Drawer with lock on right side and one key board. Table should be provided with 12" Modesty pan...

Computer chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment.