REPAIR/ MAINT OF CHARPOY PLY TOP, STEEL FURNITURE AND MISC ITEMS UNDER GE BIRCHGUNJ PORT BLAIR

Amount

TABLE PEG [FD-236, FD-277]

Replacement of existing unserviceable table top for Table peg made out of prelaminated particle board of size 300 x 450m of 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x12mm wooden beading (teak) on all the four sides all as shown on drawing and as directed by the Engineer-in-Charge. Make:-Ecoboard/ Bhutan Board/ Archid

Supply and fix in repairs to unserviceable damaged legs of size 30x50mm 380mm long for Table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Supply and fix in repairs to unserviceable damaged short rail of size 20 x 40x 300mm for table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge. Make - First class teakwood

Supply and fix in repairs to unserviceable damaged long rail of size 20x 40x450mm for table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by the Engr-in-Charge. Make - First class teakwood

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-charge.

Teapoy Varandah [FD-208, FD-255]

Material and labour for welding of broken joints of Teapoy verandah including preparation of surface and applying two coats of white synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Preparation of steel frame surfaces of Teapoy Verandah and applying two coats of synthetic enamel paint white colour over a coat of red oxide primer complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Replacement of existing unserviceable table top for Teapoy verandah made out of 18/19mm thick pre laminated particle board teak facing on top and balancing white on the other side and all the four edges provided with teak wood beading size 18x12 mm all as shown on drawing and as directed by the Engineer-in-charge.

Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-charge.

TABLE WITH DRAWER 900x 600 x 760mm [FD-224,283]

Removing of existing unserviceable table top of Table with drawer 900 x 600mm and providing new table top made out of exterior grade 18mm thick prelaminated particle board with teak wood facing one side and balancing white on the other side with 18x12 mm teak wood beading on all round, rest all as shown on drg and as directed by the Engr-in-Charge. Make : Bhutan Board, Archid Board, Eco Board

Supply and fix in repairs to unserviceable damaged legs of size 760mmx 60mmx 40mm for Table with drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Supply and fix in repairs to unserviceable damaged side short rails of size 600mmx 20mmx 110mm for Table with drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Supply and fix in repairs to unserviceable damaged front long rails of size 900mm x20mmx 110mm for Table with drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Supply and fix in repairs to unserviceable damaged bottom long stiffeners of size 780mmx 110mmx 20mm from Table with drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Supply and fix in repairs to unserviceable damaged bottom short stiffeners of size 540mmx 110mmx 20mm from Table with drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Supply and fix in repairs to unserviceable damaged drawers of size 550mm x 300mm x 110mm for Table with drawer made out of first class hard wood (teak) including providing 6mm thick commercial ply to bottom of drawer complete, rest all as shown on drg and as directed by the Engr-in-Charge.

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete for table with drawer all as shown on drawing and as directed by Engineer-in-charge.

Charpoy GI Ply Top (FD-220)

Material and labour for the following parts of Charpoy GI Pipe to make complete functional of old Charpoy including taking down old unserviceable damaged parts all as shown on drawing and as directed by Engineer-in-charge:-

Ply wood 12mm thick BWR grade of size 1980x900mm ISI marked. Make - Green Ply/Kitply/Orchid Ply

Long rail made of 32 mm dia GI Pipe of length 1960mm, medium grade (ISI Marked) duly threading both ends. Make: Bansal/Jindal/Tata

Short rail of length 900mm made out of long rail obtained from item No. 4.3 above, duly cutting and threading both ends.

Leg of length 440mm made out of long/short rails obtained from Sl No. 4.3 & 4.4 above, duly threading one end and provision of fixing arrangements for MNF set.

Check nut

GI elbow 3 way, 32mm (ISI Marked)

Flat iron stiffener of size 900x25x5mm thickness including welding and fixing. The Stiffener shall be painted with two coats of black enamel paint of make - Asian/ Shalimar/ berger

CHAIR VERANDAH PVC SEAT AND BACK (FD/MAP-II/06)

Material and labour for painting with two coats of synthetic enamel paint including scraping existing paint from frame with sand paper etc complete all as specified and as directed by Engr-in-Charge

Material and labour for replacing of hard rubber toes etc complete all as specified and as directed by Engr-in-Charge

Supply and fix 4mm thick new seat & back of chair verandah weight of seat & back not less than 1.85kg including removal of unserviceable PVC seat & back. Make AMKO/ SUPREME/CELLO

CHAIR DINING MAP (FD/MAP-II/04)

Supply and fix teak wood rear leg of size 890mm x 20mm x 25mm including removing the existing unserviceable rear leg complete all as shown on drawing or as directed by Engineer-in-charge.

Supply and fix new teak wood front leg of size 460mm x 20mm x 25mm including removing the existing unserviceable front leg complete all as shown on drawing or as directed by Engineer-in-charge.

Supply and fix new teak wood backrest of size 430mm x 45mm x 15mm slightly curved including removing the existing unserviceable backrest complete all as shown on drawing or as directed by Engineer-in-charge.

Supply and fix teak wood front rail of size 440mm x 65mm x 30mm including removing the existing unserviceable front rail complete all as shown on drawing or as directed by Engineer-in-charge.

Supply and fix teak wood rear rail of size 430mm x 65mm x 30mm including removing the existing unserviceable rear rail complete all as shown on drawing or as directed by Engineer-in-charge.

Supply and fix best quality of PVC seat of white or cream ivory colour including removing the old one all as shown on drawing or as directed by Engineer-in-charge. Make AMKO/ SUPREME/CELLO

Preparation of wood surfaces of chair dinning MAP by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat wax to the depressed surface for smooth finishing complete all as specified and as directed by Engineer-in-charge.

Table Centre Glass Top: FD-375

Supply and fix in repairs glass top of size 1200x600x8 mm duly mitred all around including removing the old glass all as specified on drawing or as directed by Engineer-in-charge. Make Atul/Modi Guard/ Golden Fish/ Swastik /Saint Gobain

Supply and fix in repairs legs of size 380mm x60mm x 30mm from made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Supply and fix in repairs bottom stiffener of size 500mm x 50mm x 20mm made out of first class hard wood (teak) including taking down unserviceable damaged stiffener complete, rest all as shown on drg and as directed by Engr-in-Charge.

Material and labour for replacing of hard rubber toes etc complete all as specified and as directed by Engr-in-Charge

Chair writing MAP or Similar (FD/E6/MAP/12)

Supply and fix in repairs of PVC seat & back duly upholstered with best quality Acrylic/polyester fabric (cost not less than Rs 400/- per sqm)complete for all type of chairs writing MAP and similar rest all as shown on drg and as directed by Engr-in-Charge.

Supply and fix in repairs of handles of chair writing MAP and similar made of black integral skin polyurethane reinforced with MS insert scratch proof complete for chairs writing MAP and similar with arm rest all as shown on drg and as directed by Engr-in-Charge.

Chair dining [FD-228, FD-279 or Similar]

Removing the existing unserviceable rear leg and providing with new teak wood rear leg of size 890mm x 20mm x 25mm complete all as shown on drawing and as directed by the Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg of size 460mm x 20mm x 25mm complete all as shown on drawing and as directed by the Engineer-in-charge.

Removing the existing unserviceable back rest and providing new teak wood back rest of size 430mm x 45mm x 15mm slightly curved complete all shown on drawing and as directed by the Engineer-in-charge.

Removing the existing unserviceable front rail and providing new teak wood front rail of size 440mm x 65mm x 30mm drilling holes at 12.5 mm C/C complete all shown on drawing and as directed by the Engineer-in-charge.

Removing the existing unserviceable rear rail providing new teak wood rear rail of size 430mmx 65mm x 30mm including drilling holes at 12.5 mm C/C complete all shown on drawing and as directed by the Engineer-in-charge.

Removing the existing unserviceable side rails and providing new teak wood side rails of size 240mm x 65mmx 30 including drilling holes at 12.5mm C/C complete all shown on drawing and as directed by the Engineer-in-charge.

Recaning of repaired chair dining with best quality of approved plastic cane 1.80 x 0.46mm and border with 3x0.60mm cane of white or cream ivory all shown on drawing and as directed by the Engineer-in-charge. Make -Premier Plastic Industries/ Garware Plastic Ltd/Maharashtra Plastic Cane Industry

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all shown on drawing and as directed by the Engineer-in-charge.

CHARPOY IP FOLDING (FD-388(R))

Supply and fix new ply wood 1680mm x 920mm x 8mm thick commercial plywood as per IS-303 including removal of old unserviceable ply all as shown on drawing and as directed by Engineer-in-charge. Note: The ply shall be in two pieces to facilitate folding of the charpoy Make - Green Ply/Kitply/Orchid Ply

Supply and fix new frame and legs made out of 25 mm dia MS conduit with wall thickness 16 gauge, including removal of unserviceable frame and legs all as shown on drawing and as directed by Engineer-in-charge. Make: Bansal/Jindal/Tata

Supply and fix new Hard rubber/PVC Shoes shall be provided to the bottom of each leg including removal of unserviceable Hard rubber/PVC Shoes and all as shown on drawing and as directed by Engineer-in-charge.

Material and labour for painting exposed steel surfaces of charpoy with two coats of synthetic enamel olive green/silver grey paint over a coat of zinc chrome steel primer. The welding joints shall be piled smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint all as shown on drawing and as directed by Engineer-in-charge.

CUSHION COVER FOR SOFA SET (FD-281,373)

Supply and fix new cover on existing cushion of sofa set of tapestry cloth (not be less than Rs 300/- per square metre.) Cushion cover shall be stitched properly and shall be provided superior quality of chain at one end. Shade of tapestry will be approved by GE, all as shown on drawing and directed by Engieer-in-charge.

BIN LINEN MULTIPURPOSE [FD/E6/MAP/06}

Removing the existing unserviceable top of size 1220mmx450mm bin linen multipurpose and providing new top made out of 18mm thick prelaminated particle board exterior grade all as shown on drg and as directed by the Engr-in-Charge. Make:-Ecoboard/ Archid/Bhutan Board

Removing the existing unserviceable sides of bin linen multipurpose and providing new bin linen multipurpose of size length 455mm x 760mm made out of 18mm thick prelaminated particle board exterior grade all as shown on drg and as directed by the Engr-in-Charge. (Note : Each side will be measured as single unit) Make:-Ecoboard /Bhutan Board/ Archid

Removing the existing unserviceable back of bin linen multipurpose and providing new Back of size 1220 mm x 760mm with 6mm thick plywood commercial type of all as shown on drg and as directed by the Engr-in-Charge. Make:-Greenply/ Century Ply/Kitply

Removing the existing unserviceable Top drawer and providing New drawer of size 385 mm x 190mm made out of 12 mm thick particle board having ply on both sides. The drawer shall run on 19 mm x 19 mm thick teak wood batten all as shown on drg and as directed by the Engr-in-Charge. Make:-Greenply/ Century Ply/Kitply

Removing the existing unserviceable Drawers (other than Top drawers) and providing new drawer of size 180mm made out of 12mm thick particle board having ply on both sides. The drawer shall be run on 19mm x 19mm thick teak wood bearer all as shown on drg and as directed by the Engr-in-Charge. (Note : Each drawer will be measured as single unit)Make:-Greenply/Century Ply

Supply and fix in repairs locking device of brass 6 lever locks iron body with duplicate keys chromium plated Make:-Godrej all as shown on drg and as directed by the Engr-in-Charge.

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of French polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drg and as directed by the Engr-in-Charge.

DRESSING TABLE INCL STOOL [FD/MAP-II/07]

Supply and fix in repairs table top for Table dressing table incl stool with 12 mm thick pre-laminated particle Board exterior grade of approved make, all as shown on drawing and as directed by the Engineer-in-charge.

Supply and fix in repairs new 5mm thick mirror for Table dressing table incl stool all as shown on drawing and as directed by the Engineer-in-charge. (Each glass shutter shall be measured as single unit) Make:-Saintgobin /Modiguard

Removing the existing unserviceable two telescopic channel and Supply and fix in repairs telescopic Channel of size 6 mm all as shown on drawing and as directed by the Engineer-in-charge.

Supply and fix in repairs new back support made out of 6 mm thick plywood for mirror of size 1020mm x 410mm for Table dressing table incl stool all as shown on drawing and as directed by the Engineer-in-charge.

Material and labour for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-charge.

Bed Hard (FD/E6/MAP/08(R)

Supply and fix 12 mm thick BWR grade phenol bonded commercial plywood ISI Marked 7 layers of size 1974x824mm as conformed to IS-303 in single piece as per drawing without any joint to the bed frame with suitable stainless steel screws with cup washers including removal of damaged ply wood all as shown on drawing and as directed by the Engineer-in-charge. Make:- Green ply/Century ply/kitply

Supply and fix in repairs to 18mm thick 225x674mm size prelaminated particle board Exterior grade, ISI marked and confirming to ISI-12823, Type-III with both sides natural teak wood shade shall be provided to head board with standard PVC beading 1.6mm thick all-round the board screwed to MS pipe all as shown in drawing and as directed by the Engineer-in-charge.

Supply and fix in repairs to 18mm thick 300x674mm size prelaminated particle board Exterior grade, ISI marked and confirming to ISI-12823, Type-III with both sides natural teak wood shade shall be provided to foot board with standard PVC beading 1.6mm thick all-round the board screwed to MS pipe all as shown in drawing and as directed by the Engineer-in-charge.

Supply and fix new Hard rubber/PVC Shoes shall be provided to the bottom of each leg including removal of unserviceable Hard rubber/PVC Shoes and all as shown on drawing and as directed by Engineer-in-charge.

Material and labour for painting with two coats of synthetic enamel paint with powder coating including scraping existing paint from frame with sand paper etc complete all as specified and as directed by Engr-in-Charge

CHARPOY WITH HARD TOP (FD/MAP-II/01)

Supply and fix 12 mm thick 1980x900mm size BWR grade phenol bonded commercial plywood ISI Marked 7 layers as confirmed to IS-303 in single piece as per drawing without any joint to the bed frame with suitable stainless steel screws with cup washers including removal of damaged ply wood all as shown on drawing and as directed by the Engineer-in-charge. Make:- Green ply/Century ply/kitply

Supply and fix new Hard rubber/PVC Shoes shall be provided to the bottom of each leg including removal of unserviceable Hard rubber/PVC Shoes and all as shown on drawing and as directed by Engineer-in-charge.

Material and labour for painting with two coats of synthetic enamel paint with powder coating including scraping existing paint from frame with sand paper etc complete all as specified and as directed by Engr-in-Charge

Removal of existing worn out painting with acid from inside & outside including preparation of surface frame and applying two coats of 1st quality synthetic enamel paint of colour smoke grey / Olive green/ White over a coat of red oxide primer, complete of the following steel furniture all as shown on drg and as directed by Engr-in-Charge. Make:-Asian/Berger/Shalimar

Rack 6 Tier ( FD-106,1038)

Book Shelf (FD-69)

Stool Steel (FD-81(M))

Book Case Steel (FD-90)

Bed Hard MAP(FD/E6/MAP/08R)

Rack shoe Steel (FD/E6/MAP/02R)

SUBASH FURNITURE SHOP

M/s Susanta Enterprises