REPAIR TO FLOORING, PCC, KOTA STONE, FLOOR TILES, WALL TILES, PLASTER, SANITARY AND PLUMBING FIXTURES, CI PIPE, PVC TANK AND OTHER B AND R WORKS IN TYPE I, II AND TYPE III QTRS AT RAKSHA VIHAR COLONY UNDER GE (I) R AND D KANPUR

Amount

Taking down cement plaster of any description,thickness including racking out joints hacking for key scrubbing down with water all as specified

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M & L rendering 15mm thick on wall in cement mortar 1:4 on fair faces of brick work or concrete surfaces & finished fair and even smooth without using extra cement complete all as specified

M&L rendering 5 mm thick in cement mortar (1:3) on concrete surfaces of ceilings & finished even and smooth without using extra cement as on ceiling complete all as specified .

Demolition of bricks work built in cement mortar including all quoins arches, pillar etc all as specified

M&L bricks work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm 1:6 all as specified.

M&L bricks work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cm 1:6 all as specified.

Demolition of cement concrete in ground floor and paving not exc.15 cm thickness ( below or above ground level) all as specified.

M & L for 75mm thick PCC (1:3:6) type C-2 as in plinth protection & finishing the surface even & smooth without using extra cement complete all as specified & directed.

Demolition of reinfocement cement concrete cut as required to facilitate and paving not exc.15 cm thickness ( below or above ground level) all as specified.

M&L for providing cement concrete 1:2:4, type B1 (using 20mm graded stone age) as in parapet, railing, fin facia slab and Chajjas etc including necessary form work complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as slab supported on walls, beams, columns & shelves and the like all as specified

S&F mild 8 to 10 mm dia deformed TMT bars cut ot length bent to shape required including cranbing, bending spirrally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips all as specified

M&L for form work to soffits of suspended slabs such roof slabs, floor slabs, shelves, landings and similar work, not exceeding 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc.

Dismantling floor and Wall tiling including cement mortar bedding (but backing) removing seviceable to store and rubbish off the premises complete all as specified

Roughening surface of old concrete floor by picking,sweeping clean and washing down with water to removing dust and brushing neat cement slurry with 0.3kg of cement per sqm all as specified

M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified

M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified complete all as specified

M&L for glazed ceramic coloured tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified complete all as specified

M&L 20 mm thick granite stone slab of any type with table rubbed fand polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

Demolition of sunken floor taking out all unserviceable material and deposited 50 mtr away all as directed by Engineer in charge

M&L for 15mm thick cement screed in cement mortar 1:3 mixed with integral water proofing compound FOSROC's complast 421 IC @ 200 ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for sunkum slab complete all as specified

Providing and applying two coats of brush bond water profing coating intire surface of shunken portion including 15 mm thick plasting in cm 1:4 a bounding coat of fosrocs nito bound AR cement.

M&L Cement concrete 1:5:10 Type E2(using 40mm graded stone aggregate) in filling mass for Sunken floor all as specified directed.

M&L cement concrete (1:3:6) type C1 as in mass concrete (Using 20mm graged stone aggregate) concrete for Sunken floor all as specified

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in bedding, finished fair and even.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

S&F 100mm size stainless steel butt hinges complete all as specified and directed

S&F 150mm long extruded aluminium alloy handle complete all as specified and directed

S&F 200mm long Anodised Aluminium tower bolt all as specified

M&L for two coat of cement base paint over New surfaces including preparation of surface all as specified

M&L for three coats of white wash on New plastered of wall surfaces including preparation of surface all as specified.

M&L for Three coats of white wash on New plastered Cealling surfaces including preparation of surface all as specified.

M&L applying two coats of oil bound distemper on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces including necessary preparation of wall surfaces complete all saw specified and directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F 20mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

Cutting chases, pinning in , for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth.

Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S&F 15mm bore stop valve, cast copper alloy, chromium plated (concealed type), screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or fur unions all as specified

S&F in repairs pillar taps cast copper alloy with cepstain heads chromium palted scrased down high pressure with or with out 'HOT' or cold with long screwed shares and fly nuts screwed for iron pipe and fixed 15 mm bore complete all as specifed and directed.

S&F in repairs, 15mm bore angle valve chromium plated, fancy type complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin, white, flat, back size 550x 400mm, incl cutting for and pinning in ends of brackets or erecting stand, Waste coupling, waste down pipe all as specified and directed.

Supply only 32mm dia waste pipe of polythelene,flexible, for wash hand basin or kitchen sink.

Supply only waste coupling of brass chromium plated 32mm dia bore discharge pipe complete all as specified and directed.

S&F squatting pan WC orrisa pattern size 580x440mm white intergal foot rest with 'P' or 's' drap incl provn of lime concrete bedding incl breabing tap existing dameaged WC seat and connection flush pipe etc and making good to floor complete all as specified.

S&F in repairs 10 liter capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve etc, complete including 32mm dia flush pipe all as specified & directed.

S&F PVC conneciton 30 cm long, 15mm size with PTMT nuts complete all as specified

S&F 100mm dia shower rose of CP for fixing with 15mm pipe complete all as specified

S&F Towel rail 600mm long of PTMT fixed with and including cromimium plated brass screws and wooden/plastic cleats (minimum weight 190gms)

S&F in repairs sink with drainage board made of stailess steel 1 mm thick kitchen or laboratory with olugs, washers and wastes; incl bedding in cemnt mortar to dwarf wall or incl fixing cantiliver brackets and sonnecting union to pipe overall size 915mm x460mm blowl size 410mm x 330mm x 160mm.

S&F 100mm dia stainless steel grating complete all as specified

S&F 20mm dia PVC Coated Curtainrod fancy type with brackets complete all as specified and directed.

Supply only PVC curtain Knobs fancy type fixed with sides of curtain rod complete all as specified and directed

Demolition and breaking up drain pipe of any type and size, set in cement mortar, in foul position.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement, with oval access door, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap cement complete all as specified and directed.

U.R ASSOCIATES

P.N. BROTHER

AJAY CONSTRUCTION COMPANY