SPECIAL REPAIR AND ADDN ALTN OF BLDG NO P3 SWIMMING POOL AT MALL ROAD UNDER GE EAST DELHI CANTT 10

Amount

Dismantling of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles.

M&L brick work with sub class 'B' straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

S&F in 10 mm thick slected quality toughned glass cut to size and shape including chamfering of edges cutting holes/ slotes for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concept in matching pattern of size 1200 X 600 X 8 to 10 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles incl 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces as wall clading 350 X 250/450 x 350X 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.

Excavating in any type of soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M & L for PCC 1:3:6 type C-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling and similar work complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F of Polycarbonic sheet of 3 mm thickness fixed in roof covering or in any position with self tapping (threading) screws/ as per as per manufacturer instruction complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F MS angle iron, pipe, tube (Square/rectungualr) etc as in rafters, purlins ,ladder etc.complete all as specified and directed by Engineer-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of equired size, on the top of floor or the side of waist slab with suitable arrangement

Taking down cement plaster on brick wall including racking out joints hacking for key scrubing down with water etc

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface (internal) etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for 5 mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

M&L 10 -12mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair / unfair faces of brick work or concrete surfaces & finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.

M&L for Preparation of new/old External plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over and including 1 mm thick wall care putty of aproved make etc complete all as specified and directed.

M&L for applying of two coat of plastic emulsion paint on new wall/ Ceiling surfaces over and including a coat of priming over 2 mm thick wall care putty of approved make including preparetion of surfaces complete all as specified and directed.

Dismantling / taking out of existing roof treatment with APP membrane of any thickness including taking out existing screed bed / rendering and PCC Padding of any thickness with all necessary arrangements complete all as specified and directed.

M&L for cutting out cracks to V section in existing roof or terracing, cleaning out, wetting,grouting with cement and sand slurry in 1:3 complete all as spesified and as directed.

Providing and applying Smartcare Dampproof Ultra, fibre reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers at roof surface in multiple coats @2.5 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and other coats needs to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. When the 2nd coat is wet, the Smartcare EPDM tape (at corners and edges)shall be inserted between second and third coat to secure corners & edges, let the material ooze out from the tapes corner. Same treatment of Smartcare Dampproof shall be continued to the parapet walls to better envelope the whole area. The coating shall be terminated carefully to the other side of the parapet walls.

M&L 15 - 20mm thick polymer modified readymix cement base plaster with water proofing as per manufacturer instruction on fair / unfair faces of brick work or concrete surfaces on Terrace / chajjas laid over and inclunindg chicken wire mesh net of standard gauge as per direction of Engr - IN - Charge of with fixing arrangement and finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.

Demolition of cement concrete unreinforced concrete of any description and in any position not otherwise specificialiy provided for complete all as specified and as directed.

M&L for PCC 1:2:4 type B -1 (using 20mm graded crushed stone agregate) as in roof kerb/benching and OHT platform in radius 10 cm with waterproofing compound as per manufacturers instructions complete all as specified and directed.

Supply only liquid Water proofing compound.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed by Engineer-in-Charge

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing. complete all as specified and as directed by Engineer-in-Charge

S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 15 mm dia complete all as specified and as directed by Engineer-in-Charge

All as per item No.36 above but fixing only complete all as specifed .

All same as per item No - 36 here-in-before but 20 mm dia complete all as specified and as directed by Engineer-in-Charge

All as per item No. 38 above but fixing only complete all as specifed .

M&L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 in brick or stone wall , cutting not exc 10cm girth complete.

S&F for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge

S&F 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge (Make-Hindware/Jaquar Cat Part No. ORM-10053/MARC

S&F 15 mm bore brass CP single lever Basin mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed .

S&F in repairs wall mixer 3- in - 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall flange with hand and overhand shower with all fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts,Hand shower 105mm dia round shape single flow with air effective(ABS body and Face plate chromium plated) with rubit cleaning system complete all as specified.

S&F vitreous china wash basin over counter ovel type size 600x425x195mm jaquar, hindware or eqvilent fixed over granite slab with all fitting and fixture complete all as specified.

S&F 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F in repair sheet glass shelf assembly consisting of 6 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F 15 mm bore 2 way angel valve with wall flange complete all as specified & directed Make Somany Cat No 220909/CERA Cat No 2008211, MARC MJN-1410.

S & F CP Toilet Paper holder with flap guard complete all as specified and directed Make Cera Cat No F5003110/Somany Cat No 230507/Hindware F-880003

S&F CP towel ring complete all as specified & directed Make : Cera Cat No 5004105/Hindware Cat No 880007, Somany Cat No 230703

S&F CP towel rack 600 mm with hook complete all as specified and directed Make CERA F-5002101/Hindware F-880008, Somany Cat No 230502

S&F CP Brass soap dish complete all as specified & directed Make Hindware Cat No F880011/Cera F5003106.

S&F wall mounted Soap dispenser touch free, hand soap dispenser of Model code - DSDR 0112 - S of volume - 1100 ML with liquid output 1.50 ML to 2.00 ML made of 316 stainless steel with automatic induction 3 - 10 CM or equivalent complete all as specified and as directed.

S & F Corner Glass Shelf 300 x 300 mm radius consisting of 5.5mm thick sheet glass with chromium plated brass brackets with two Nos CP Railing in each set complete all as specified and directed Make Cera Cat No F5005103 or equivalent Hindware/Somany.

S & F CP Health Faucet with 1.00 Mtr long CP Flexible pipe as per approved sample complete all as specified and directed Make Hindware Cart Part No F160001/Marc Cat No MAC-3052 Cera Cart No F8030103.

S&F Vitreous china wash down water closet pan wall hung WC 2049 EWC Wall hung Ext. 'P" 655 x 390 x 745 mm cistern 2129 , shoft closed seat cover 2356 and 2238 twin flush fitting of Cera , hindware , jaquar or other equivelent , including flushing cistern and fixed with brass screw complete all as specified and as directed.

S&F CP towel rail 600mm long complete all as specified and as directed by Engineer-in-Charge

S&F 450 mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge

S&F over head shower rose CP Brass with shower arm for 15mm bore pipe of size 150x150mmcomplete all as specified and directed Make :- Somany Cat No 240406/ CERA –F7010506/ Hindware-240806

Dismantling water tanks exc 250 Ltrs but not exc 500 ltr capacity and removing to store.

S&F rotantional moulded polythylene tripple layered water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Dismantling water tanks exc 500 Ltrs but not exc 1000 ltr capacity and removing to store.

S&F rotantional moulded polythylene tripple layered water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20 mm bore omplete all as specified and directed.

Disconnecting existing tanks of capacity exc.250 and not exceeding 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

S&F in repair 20mm dia Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 75 to100 mm complete all as specified and directed.

S&F PVC ( SWR ) 75mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or in floors.

Supply and fixing 110mm bore SWR pipes single socketed in any length with rubber ring joints laid in trenches or in floor / fixed to walls etc complete all specified and directed.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20 mm thick screed bed in Cement Mortar (1:4) complete all as specifed and dircted .

Dismantling boarding, any description, fixed any position with screws complete all as specified.

S&F 18mm to 20mm thick solid factory made PVC board for cup board /cabinate shutter with one side 1mm thick printed pvc sheet other side plain pvc sheet suitable fixed with &including suitable pvc frame as per specification & drawing complete all as specified & directed.

S& F Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads complete all as specified.

S&F aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed.

Supply and fix 40mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed

Providing and applying high quality acrylic modified resin based texture of finetex Honeycomb sand stone- 3211with anti alage and UV resistance property to be applied as in intermeadite finishes in desired pattern @ 43.04 kg/10 sqm to form film of 1 - 1.50 mm thickness after scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces and applying coating with premium acrylic smooth exteriorpaints with Silicone additives of required shade by two or more coat @ 1.43 Ltrs/ 10 sqm over and including one coat of premium quatity primer. Complete all as specified and as directed.

M&L for Anti Skid, highflexural strength, wear resistance, fire resistance, frost resistance, eco frandly, camical resisstance Durastone heavy duty Vetrified Paving tiles 15mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

Demolition of RCC Jalli any size and any position and Providing and fixing glass reinforced concrete (G.R.C) Jalli/panelss in approved size pattern,design,thickness and colour of M/s GRC Terra Firma make or equavalent .Quart,fine silica sand,Alkali resistant glass fibre manufacture by NEG or equavalent, super plasticizers manufactue by NEG or equavalent, super plasticizers mamufactureed by BASF or equavalent,polymer manufactureed by Basf or equavalent and UV resistant synthetic inoganic pigment should be used for pigmentation manufactureed by Bayferrox(Germony)b or equavalent .The material casting should be used for pigmentation manufactureed by Reckli or equavalent.The fixing of screen should be Dry fixing i.e to be done with MS frame work with and including fixing arrangement in required shape including brackets ,fasteners and pins etc, complete all as specified and as directed.

4 Treatment to pipe cutout :- Annualar Space left around pipe cutouts/bore packing in floor and walls shall be grouted by using non-shrink cementations grout followed by a sealing system approved by manufacturer. 5. Water proofing : - Applying 1st and 2nd coat of Dr Fixit Fast Flex " or equvalent :- surface System for Protecting Concrete and Masonry on base surface and 3rd final coat of "Dr Fixit Fast Flex " or equvalent Surface system Screeding for Protecting concrete and masonry over the entire surface after 3 to 4 hours over the fiberglass surface Air curing for 1 to 2 days. 6 Base Coat Plaster (Two Coat) :- Lying 25mm thick (1:4) protective plaster mixed with approval Sand, Cement, Dr Fixit LW + (or equivalent ) - Interal waterproofing compound , @ 200ml / 50 kg of cement . Curing 2 days. 7. Ponding test shall be conducted for 7 days. 8. Final cleaning the surface ready for fixing glass tiles.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any soft soil complete all as specified and directed.

Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any kind of soil complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 ( Nominal mix) using 40 mm graded stone aggregate as in foundation filling and similar work complete.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete etc complete.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete.

Formwork to sides of concrete roof beam, LBs sides and soffits (if any) of similar work; vertical or to batter for rough finished flat surfaces of concrete complete.

Formwork to Chajjas through and similar items including edges and similar work complete all as specifiede and as directed.

Formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete.

M&L for rough finished formwork to edges of concrete flats, treads, break in floors, window cills, concrete railings, floor and roof n.exc 20 cm wide and side of RCC/ PCC band in walls, horizantal or sloping or similar work exc 10 cm but n. exc 20 cm wide.

M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

All as per item No. 95 above but 6 to 8mm dia complete all as specified and as directed.

TMT bars for reinforcement 5mm to 10mm dia as in stirrups/spacers/binders etc. cut to length bent to shape required including bending cranking and hooking ends and binding with including MS wire not less than 0.9mm(annealed) dia complete all as specified.

M & L for providing RCC M- 25 using 20mm graded stone aggregare in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns and similar work complete all as specified and as directed.

M & L for providing RCC M- 25 using 20 mm graded stone aggregate in columns, pillars, piers, post and struts etc complete all as specified and as directed.

M & L for providing RCC M- 25 using 20 mm graded stone aggregate in Beams, cantilevers,and lintels and chajja etc complete all as specified and as directed.

M & L for providing RCC M- 25 using 20 mm graded stone aggregate in Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed.

Returning filling in incl spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified.

Removing excavated material to a distance n. exc50 m and depositing where directed at a level n. exc 1.50 m above the starting point.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 size in hinges 100 mm complete all as specified and as directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as specified and as directed.

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm complete all as specified and as directed.

S&F in 5 - 6 mm thick slected quality toughned glass obsecured or frosted cut to size and shape including chamfering of edges cutting holes/ slotes for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed.

M&L for galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed in wooden /steel frame with tinned tack or galvanised wire staples or beading etc complete all as specified and as directed.

M&L hard core of broken stone or boulders gauge n exc 63mm , deposited , spread & levelled in layers n exc 10 cm thick , watered and well rammed to atrue surface etc complete.

M& L for cement concrete 75mm thick , 1:4:8 type D - 2 using 40mm graded stone aggregate as in sub base to receive floor finish etc complete all as specified.

M&L for Preparation of new/old plastered surfaces of walls and two coats of exterior emulsion paint (Weather Coat) over 2 mm thick wall care putty of aproved make and a coat of priming paint etc complete all as specified and directed.

M&L for screed bed or bedding layers of mortars 15 mm thick with water froofing compound in cement mortar 1:4 laid over concrete surface when concrete is green at roof complete all as specified and as directed.

Supply only Integral Water proofing compound.

S&F gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F of PVC connection 15mm size with PTMT nuts of length 450 mm fixed complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

S&F of PVC (SWR) benda (any radius) 75mm bore complete all as specified and dorected.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick with gray cement and pigments set jointed and pointed in neat cement slurry in floors over and including 20mm thick screed or bedding layers of mortar in CM 1:4 complete all as specified and as directed

M&L for PCC 1:2:4 Type B - I using 20 mm graded stone aggregate as coping or packing of sides, edges etc complete all as specified.

S&F vitreous china urinal of of cat No. URS - WHT - 0704 of size 710 x 485 x 300 mm with Sensotronic sensor SNR - CHR - 51097 flushing valve for urinal with complete kit of make jaquar , Cera and Hindwarw and equivelent with all fitting and fixture complete all as specified.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket, light fittings etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete all as directed.

Material and labour of point wiring complete with1.5 Sq mm (nominal area) FRLS PVC insulated unsheathed and multistranded copper conductor cable ISI marked including concealed conduit, with MS box with modular box for fixing modular switches/sockets etc for one light point / fans/ socket on Independent board point controlled by one 1-way switch complete all as directed.

All as per srl item no. 129 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for One 3 pin socket outlet 5 amps on the same board complete all as directed.

All as per srl item no. 129 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire independent board complete all as directed.

S & F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S & F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S & F modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as directed.

S & F Modular Fan regulator step type ,120 watts complete all as directed.

Taking down of ceiling fan any type and size ,dismantling blades etc & Including deposited to MES store yard.

Supply and fixing of ceiling fan complete with blades, down rods,suitable for regulator and accessories, 230 V, 1200mm sweep (BLDC) five star rating, servie value not less than 6.0 BEE complete all as directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 230 volts, 5 Amps complete all as directed.

Supply and fixing in replacement Modular AC Socket box including socket and with 25Amps SP MCB, 230 Volts, 50Hz. Complete.

Supply and fixing LED ceiling light fitting 15 watt, in round shape, recessed/surface type and making all electric connections complete all as directed.

Supply and fixing LED mirror light fitting 10 watt and making all electric connections complete all as directed.

Supply and fixing LED tube light fitting, 20 watt ,230V wall mounting type and including all electric connections complete all as directed.

Supply & fixing of ventilating fan of size 250m sweep plastic body including louver and making all electric connections complete all as specified and directed.

Supply and fixing of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections complete all as directed.

S&F of LED bulk head fitting 10 watt made of cast aluminium alloy with opal glass diffuser complete all as specified and directed.

Supply and fixing of Flexible LED tubelar light cool/warm white , and making all electric connections complete all as directed.

Supply and fixing of adopter AC to DC suitable for tubelar LED light complete all as directed.

Supply and fixing 25 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as directed.

Material and labour in replacement SPN DB with double door 8 way, 240V with busbar 200A rated,making all electric connections complete all as specified and directed.

S&F of MCB, single pole, 6 to 32Amp, C curve type 10 KA, 240 Volt. making all electric connections complete all as specified and directed.

S&F in of Isolator SPN 40 Amp , 230 Volt ,all connections complete all as specified and as directed.

Material and labour in replacement submain wiring complete with 2 x 2.5 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 2.5 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Material and labour in replacement submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Supply and fixing in replacement of LED street light fitting 160 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in replacement of LED flood light 150 Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in street light fitting bracket, 1mtr long made out of galvanized iron pipe of 25mm dia size light grade complete with nut, bolts, complete all as directed.

Supply and fixing of galvanized iron pipe of 50 mm dia size light grade complete with nut, bolts, complete all as directed.

M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 Core specified and directed at site by Engineer-in-Charge.

M&L for sand cushioning to under ground cable provided with layers of sand(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Supply and fixing mild steel pole 3350mm high, cast spun and extended lighting fixtures 35 watt LED, silicon rubber gasket, polycarbonate diffuser ,corrosion and U.V ray resistant coating including foundation J bolt18.5mmx 500mm length with nut and washer complete all as specified and directed. (Decorative Type) Make -Lustre Ll-8238-50035 or equivalent in luxmax /Twinkle/ Neri

M&L Cement concrete in foundations, filling and mass conc in ratio 1:2:4 type B2 with 40mm stone graded complete all as specified.

Supply and fixing of Geyser 35 ltr capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and CP and PVC connection for inlet and outlet upto stop cock including complete all as specifed and directed.

Supply and fixing of PVC Junction box suitable for mounting on pole with double clamps, Nuts, bolts & washer incl copper bus bar TPN complete all as specified and as directed.

M& L for Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6.3 mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15 cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead of size 4 mm by means of galvnised nuts, bolts and washers. GI wire of 4 mm dia laid in 15 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor).

JYOTI ENTERPRISES

PAVAN SUPPLY CORPORATION

M/S MSD & Associate

M/s M M BAHL

M/s SAAR ENGINEERS

A R construction

G and G Infratech Private Limited