132 KV BUS SPLITTING AT 132 KV SUBSTATION CANTT, VARANASI

Amount

Opening of all the Y-Shaped Jumpers Connecting the 132 KV Main Bus with the Bus Side Isolators of Different Bays, Opening of the Droppers Connecting 132 KV Main Bus and PT with all associated work required for successful completion of Job including the cost of Men, Misc Consumables and T&P.

Erection of Main and Auxillary Structures (BTM-02 Nos,AXM-01 Nos,BBL-01 Nos,BCT-03 Nos etc) as per drawing using proper size Nuts/Bolts/Washers(Which will be Provided by UPPTCL) including shifting of structure/equipments from storage place to erection site with all other associated works for satisfactory completion of the job including the cost of men, misc consumables and T&P required for the Job.

Un-Stringing of 132 KV Main Bus Bar of ACSR Moose Conductor of Span 36 mtr from 132 KV Sarnath (Ledhupur)-Cantt Bay to 132 KV Sarnath(400)-Cantt Ckt-II Bay and then Cutting the Bus-Bar in the Ratio of 1:2 including the cost of Men, Misc Consumables and T&P required for the successful completion of Job.

Stringing of 132 KV Main Bus Bar of ACSR Moose Conductor of Span 12 mtr/24 mtr with all associated works for the satisfactory completion of job including the cost of men, misc consumables and T&P Required for the Job.

Erection of 132 KV Bus Section Isolator on already erected BBL Structure and Alignment of the same for the smooth operation.

Jumpering of all the Y-Shaped Jumpers connecting the Bus and BSI, Jumpering of 132 KV Main Bus to PT with all associated work required for the satisfactory completion of work including the cost of men, misc consumables and T&P required for the Job.(1 Job for each Jumpering)

Jumpering of Section Isolator with the newly formed two sections of 132 KV Bus with all associated work required for the satisfactory completion of work including the cost of men, misc consumables and T&P required for the Job.(1 Job for each Jumpering)

Erection of 132 KV CVT/PT (R,Y& B Phase) on already erected BCT Structure and CVT Junction BOX.

Shifting of PT Secondary Supply Connection of 132/33 KV 63 MVA-II and 40 MVA from already installed BUS PT to Newly installed Bus PT by the way of Laying New Cable and ferruling, glanding and termination of New Cable with all the Cost of Men, Misc Consumables and T&P required for the Job.

Cutting Straightening laying of 500 mm below inside ground and above ground of M.S. flat of Size 50x6 mm (Cost included) and as per requirement for earthing of auxiliary structure, equipments and cable trenches including welding, painting etc. with all other associated works for satisfactory completion of the job

U K S ENTERPRISES

R.K. ENTERPRISES