MAINTENANCE/REPAIR/REPLACEMENT OF EXTERNAL ELECTRIFICATION HT/LT PANEL VCB/OCB TRANSFORMER HT/LT UG CABLE AND OTHER ALLIED WORKS AND INTERNAL ELECTRIFICATION E/M FITTING AND FIXTURES AND REPAIR/SERVICING OF CEILING FANS EXHAUST FANS GEYSERS ETC

Amount

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of stays, laying cables etc and getting out in soft / loose soil complete all as specified and directed

Supply, lay , spread in trenches, river sand including cleaning, spreading, levelling, punning for laying /cushioning of cable complete all as specified and as directed. Note: Punning thickness shall be measured and paid.

Supply, lay in trenches burnt Bricks, old size, Sub class "B" for cable protection complete all as specified and as directed.

Removing excavated surplus soil not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm using excavted soil complete all as specified and as directed.

Removing the old unserviceable LT UG cable including lugs and glands and taken as credit including supply and Laying in trenches/poles/wall etc LT UG Cable XLPE insulated sheathed with multistranded aluminium conductor armoured with galvanised steel wire /taps 1100 volts grade conforming to IS specifications and of following sizes:-Make:Gloster/Polycab/Nicco

LT UG Cable 4.0 Core 10 sqmm.

LT UG Cable 4.0 Core 25 sqmm..

LT UG Cable 3.5 Core 35 sqmm

LT UG Cable 3,5 Core 50 sqmm

LT UG Cable 3.5 Core 120 sqmm

LT UG Cable 3.5 Core 185 sqmm

Taking out from trenches/poles/wall etc LT XLPE UG Cable /PVC Sheathed aluminium conductor armoured during emegency break down times, attending and rectifying break down immediately and relaying after fault rectification duly tested in trenches/Poles/Wall of HT/LT UG Cable size of any size complete all as specified and as directed. Note:(1) Attending break down immediately, rectifying the cable fault, testing etc are inclusive of the rate quoted for this item. (2) Earth Work , Jointing Kit will be measured and paid separatly under relevent Items.

Material and labour for cutting the existing bituminous road / cement concrete surface 150 mm thick to the required width and depth for laying pipe lines and making good the disturbed area to match with the existing surface complete all as specified.

Supply and fix Straight through joints (epoxy) for underground cable including joint kits and labour complete for making joints suitable for LT PVC sheathed / armoured heavy duty cables with aluminium conductor of following sizes :-

LT UG cable 4 core up to 16 sq mm, Make Denson/M seal/siemens

LT UG cable 3.5 core 25 to 50 sq mm, Make Denson/M seal /siemens

LT UG cable 3.5 core 70 to 150 sq mm, Make Denson/M seal/siemens

LT UG cable 3.5 core185 to 300 sq mm, Make Denson/M seal /siemens

Supply and lay 50 mm dia steel water tubing galvanised medium grade including all fittings such as bends belows tee, unions, sockets etc laid in trenches for drawing cables under road/drain crossing etc complete all as specified and as directed. Make- TATA/Jindal/Zenith with ISI marked.

All as per item no 10 here in before but 100 mm dia GI tubing.

Repair and welding work the existing panel board door and provide hinges for door if necessary and lock arrangement with provision of pad lock with keys, making good the electric connection, wirings, PROVIDING or REPLACING CABLE LUGS SUIITABLE SIZE and cleaning the welding surfaces by rubbing and polishing with one coat of synthetic enamel paint complete all is specified and as directed.

Supply and Replacement of MCCB 4 POLE with breaking capacity 36 KA 415 volts Adjustable thermal & adjustable magnetic setting directly fixed to board/panel /walls complete all as specified and directed of following capacitiesMake: Siemen/Schneider/ABB

Supply and Replacement of MCCB 3 POLE 415 volts Adjustable type directly fixing to board/panel /walls all as specified and directed of following capacitiesMake: Siemen/Schneider/ABB

125 Amps with breaking capacity 36 KA

100 Amps with breaking capacity 36 KA

Supply and Replacement of MCB TPN 415 volts C Curve directly fixed to board/panel /walls completeall as specified and as directed of following capacitiesMake: Siemen/Schneider/ABB

Supply and Replacement of Following capacitors in Power Factor correction panel:

5 Kvar Capacitor Make: Epcos/Crompton Greaves/L&T

3 Kvar Capacitor Make: Epcos/Crompton Greaves/L&T

1 Kvar Capacitor Make:Epcos/Crompton Greaves/L&T

10 Kvar Capacitor Make: Epcos/Crompton Greaves/L&T

Supply and Replacement of Change Over Switch of the following Amps : Make:ABB/L&T/GE

Supply and Replacement of Current Tranformer of the following Amps Make;Alstom/Kappa/AE

Aluminium Cable lugs suitable for cable of following sizes

3.5 Core 120 to 185 sq mm

3.5 Core 50 to 90sq mm

3.5 Core 16 to 35 sq mm

Supply only Transformer oil

Supply and fix Insulators for 2 pole structure(ISI Marked)

Comprehensive maintenance of street light/security light/flood lights/post top lanterns/garden lights/bollard lights/Solar lights/Highmast lights etc including control panels, street light feeders at ICGS Mandapam, South Mandapam and CGRA Mandapam Camp inncluding regular maintenance, attending fuse calls/street light complaints all including opening, checking for the serviceability of parts, replacing unserviceable parts, cleaning of covers, reassembling and refixing on pole/pillars/gate/watch tower/buildings and ensure daily all lights are serviceable all inclusive of minor spares( worth of Rs 500/ per month)required to make them serviceable for the following items complete all as specified and directed :- Note:One Electrician and one helper shall be engaged by the contractor for maintenance and repair three days in a week and as directed by Engineer-in-Charge . (a) HPSV/T4 street light fittings - 120 Nos, (b) LED Street light fittings - 42 Nos, (c) Flood lights - 06 Nos, (d) Post top lanterns - 40 Nos, (e) CFL Sesurity lights - 25. (f) Solar Lights -60 Nos (g) Highmast Light 08 Nos Note:- The rate quoted by the contractor shall be deemed to include for the following provisions :- (a) Attending all faults of UG cables of street light feeder, and tree branch cuttings for 2 meter around all lights, cleaning the coping area of poles and making the junction boxes cables connection secured with lugs, screws clamps etc. (b) Major items/spares required for item No. 1 will be measured and paid separately

Supply only Lamp Holder for 70/150/250/400 watts HPMH/SV Make : Philips/Wipro /Bajaj

Supply only 24 watts T4 lamp Make : Philips/Wipro /Bajaj

Supply only Lamp Holder for 70/150/250/400 watts HPMH/SV

Supply and fix LED street light with pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection luminaire with high power LED 75 watts including removing old unsv fitting and taken as credit complete all as specified and as directed. Make: Bajaj Model : EDGE LED Street light BRTFG 75 W LED or equivalent in Philips, Wipro approved by GE.

Supply only for replacement of (bracket) 40 mm dia GI pipe light grade,1.5 mtr long, 30 degree bent to shape and fixed with 40 x 6 mm MS flat iron clamp-02 Nos of suitable size with nuts and bolts of GI etc on poles complete all as specified and as directed .

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with Stranded aluminium conductor of size 4 core 10 Sqmm inlcluding taking down of old unservicaeble UG cable and taken as credit complete all as specified and as directed .Make:Gloster/Polycab/Nicco

Excavation in trenches. n. exc 1.5m wide & n.exc 1.5m in depth and n. exc 10 sqm on plan , getting out in hard/dense soil for laying of cables etc. complete all as specified and as directed.

Supply and fix twin core 4 Sq mm multi stranded copper conductor PVC insulated and sheathed cable to connect from junction box to street light fitting throughand provision of PVC Conduit 20 mm bore medium grade with all fitting and provide minimum 3 Nos clamping arrangement to fix with street light poles inluding taking down old unservicable cable and PVC conduit of any size and any type from pole and taken as credit complete all as specified and as directed. Make of PVC copper conductor : Finolex/Poly cab/ Asian and Make of PVC conduit : Avon plast/ Kon seal/ Garware.

Supply and Fix Integral decorative LED bollard with opal acrylic and IP65 Protection 9 watts including earth and masonary works like suitable size platorm for fixing bollard light with bolts, nuts and PVC junction box including removing old garden lightsand taken as credit complete all as specified and as directed. Make: Bajaj Model: 111284 Tulip-BGBOM 605 9W LED or equivalent in Philips/Wipro

Supply and Fix PVC junction box of size 155x155x100 mm including busbar with MCB SP 06 amps including removing old unserviceable PVC junction box and taken as credit complete all as specified and as directed .Make : Sintex/Hensel

Supply and lay 50 mm dia steel water tube galvanised light grade including all fittings such as bends belows tee, unions, sockets etc laid complete laid in trenches for drawing cables/under road,drain crossings etc complete all as specified and as directed. Make- TATA/Jindal/Zenith with ISI marked.

Supply and fix in replacement of tubular battery 100Ah 12V suitable for solar light fittings including taking down unserviceable battery any type capacity and taken as credit complete all as specified and as directed Make Exide Model No. 6LMS100L 100AH Solar Battery/Amaron/Tata

Supply and fix Battery box suitable for TATA BP solar lights battery as per existing size

Supply and fix Solar panel 75 w (1x11w or 2X 11 W LED/CFL) suitbale for existing solar light of make : TATA BP

Supply and fill Petroleum jelly

Supply and fix 4 pin type 11 W CFL lamp suitable for solar lights. Make :Philips/Surya/CG

Supply and fill distilled water for 12V, upto 100AH battery as per requirement complete all as specified and as directed.

Supply and fix 15 watts LED light fiiting with inbuilt inverter Make:Bajaj Model BRLEP 15W LED or Equivalent in Philips, CG as approved by GE.

Servicing and providing minor parts required for functioning of inverter MV3 (1x11w) MV6 (2X11W) suitable for TATA BP solar lights

Supply and fix MS iron rope 6 mm dia 7/19 construction size and length inclding removing old unserviceable ropeand taken as credit complete all as specified and as directed .

Dismantling of high mast rope motor from pully and remove the old and burnt copper winding and replace it with new super enamelled copper winding and refix it on the same position including testing complete all as specified and as directed .

Disconnecting and dismantling, taking down high mast lantern carriage and lowering at ground level and re-fix it in same position after repair and replacement of old unserviceable chocks, bulbs, wires, ignitors etc, including all allied fittingscomplete all as specified and as directed .Note :

Supply only the following items for Highmast light Make : Philips/Wipro/Bajaj

Capacitor of HPMH/HPSV- suitable for 400W, 20/23 mfd

Ballast for HPMH/HPSV-400W

Ignitor for HPMH/HPSV-400 (NI)

Metal halide lamp 400W

MNX 9 Contactor with MNX A2 auxillary contactor including suitable wiring for Clock wise and anti clock wise motor operation with push button

MCB TPN 63 Amps 4 pole Make:- Make:Indo Asian/L&T/Siemen

Servicing of High Mast Gear system for Tool motor, double drum winch with topping up gear oil, pulley assembly, replacement of oil seal, link chain complete all as specified and as directed.

Supply and fix 5 core PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, incuding removing old wire and taken as credit complete all as specified and as directed .Make: Finolex/Poly cab/Asian

Material and labour for Painting of Highmast ring with choke box and other pipings with two coat of synthetic enamel paint including preparation of old steel surfaces complete all as specified and as directed

Supply and fix LED 200 W Flood light luminaire with secondary optics made in pressure die-cast housing and heat sink in aluminium extrusion with IP 66. Make : Bajaj Model : BARFEG 200W LED or equivalent in Philips/Wipro

Supply and fix Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure fixed in OHT or high raise or jetty building or mast light with all accessories including removing old one and taken as credit complete all as specified and as directed .Make: Bajaj Cat No:110731 or equivalent in Philips/Wipro

Material and labour fot Preparation of old surface of RCC electric pole of 7.5 m long above ground level and applying two coats of cement based paint on pole and painting two coats with aluminium paint on cross arms, clamps including preparation of old surfaces complete all as specified and as directed

Material and labour for Painting solar light poles, bracket panel frame and battery box with one coat of synthetic enamel alumium paint to match with the existing colour including preparation of old steel surfaces complete all as specified and as directed

Taking down carefully copper/aluminium point wiring (light,fan, socket or power) including fixture and fittings complete including removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core with colour code drawn through and including 20 mm dia non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories, concealed conduit or casing cappings including acceesoires fixed on wall / ceiling or concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with FRLS multistranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for one light point controlled by one switch Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware.

All as per item No.53 here in before but One fan point controlled by one switch and one regulator

All as per item No.53 here in before but One 3 pin 5 Amps switch socket on independent board

All as per item No.53 here in before but One 3 pin 5 amps switch socket on same board alongwith other switches.

All as per item No.53 here in before but One bell point controlled by bell push switch on independent board.

Material and labour for Point wiring with 2.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core with colour code drawn through and including 20 mm dia non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories, concealed conduit or casing cappings including acceesoires fixed on wall / ceiling or concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 2.5 sqmm PVC insulated unsheathed cable with FRLS multistranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for one 3 pin 15 amps switch socket outlet on independent board. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware.

Material and labour for Point wiring with 4.0 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core with colour code drawn through and including 20 mm dia non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories, concealed conduit or casing cappings including acceesoires fixed on wall / ceiling or concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 4.0 sqmm PVC insulated unsheathed cable with FRLS multistranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for one 3 pin 15 amps switch socket outlet on independent board. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware.

Material and labour for Sub main wiring with two run single core 6.00 sqmm multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade and one run of 6.00 Sq mm multi stranded copper conductor cable as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing cappings including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii) Three run of 6.0 Sqmm cable and one run of PVC conduit will be measured as one unit. (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. (V)Make of PVC conduit : Avon plast/ Kon seal / Garware.

Material and labour for Sub main wiring with four run single core 6.00 sqmm multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade and two run of 6.00 Sq mm multi stranded copper conductor cable as earth continuity conductor with colour code drawn through and including one run of 32 mm dia rigid PVC conduit and conduit accessories or casing cappings including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii) six run of 6.0 Sqmm cable and one run of PVC conduit will be measured as one unit. (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. (V)Make of PVC conduit : Avon plast/ Kon seal / Garware.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets etc for reuse at site or removing from site and depositing in the MES store complete all as specified and as directed.

Taking down carefully by unscrewing from ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site or removing from site and depositing in the MES store complete all as specified and as directed.

Supply and fix switch piano flush type single pole one way 5 A 240 Volts complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Swich socket outlet 2 in 1, 3 pin, 5A, 240 Volts complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Stepped type electronic fan regulator flush type , 240V on the existing phenolic laminated sheet for 1200 mm sweep ceiling fan including taking down old unserviceable one and taken as credit complete all as specified and directed Make :Legrand/Anchor/Rider

Supply and fix Bell push flush type 5 amps single pole 240 Volts including taking down old unserviceable calling bell push complete all as specified and directed Make :Legrand/Anchor/Rider

Supply and fix Call bell ding dong, AC, 240 V, single pole, including taking down old unserviceable calling bell and as credit complete all as specified and as directed. Make :Legrand/Anchor/Rider

Supply and fix Switch socket combination multipurpose 3 pin, 5 amp, Flush type 240 Volts including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Switch socket combination multipurpose 5 pin, 2 in 1 5/16 amp, 240 Volts including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix Lamp holder fancy type, isolated body ,PVC/Polycarbonate with cord grip cap suitable for retrofit LED Bulb including taking down old unserviceable lamp holder and taken as credit complete all as specified and directed. Make : Baja/Anchor/HPL

Supply and fix MCB 6-32A single pole 240 Volts of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directed Make:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB SPN 240 volts, upto 40 amps of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB SPN 240 volts, 63 amps.of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB TP 415 volts, 32 amps of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB TP 415 volts, 63 amps of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB TP 415 volts, 100 amps of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB TPN 415 volts, 63 amps of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB TPN 415 volts, 100 amps of rupturing capacity 10 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix RCCBs for earth leakage protection, Double pole 40 A, 300mA, including removing of old unserviceable RCCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix Modular switch 6 Amps one way flush type 240v AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Modular Bell push 6A, 1 module flush type ,240v AC including taking down old unserviceable modular be and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Modular Socket 6 A, 2/3 pin combined 2 module flush type , 240v AC, including taking down old unserviceable modular socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module including taking down old unserviceable modular socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Modular stepped type electronic fan regulator, 120 W -2 module, 240 V including taking down old unserviceable one and taken as credit complete all as specified and directed Make: Legrand/Anchor/Rider.

Supply and fix 5 Amps Switch socket combination for fixing gang box including taking down old unserviceable one and taken as credit complete all as specified and directed Make: Legrand/Anchor/ABB

Supply and fix 15 Amps Switch socket combination for fixing gang box including taking down old unserviceable one and taken as credit complete all as specified and directed Make: Legrand/Anchor/ABB

Supply and fix metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 415 Volts 20/32 Amps including taking down old unserviceable one and taken as credit complete all as specified and directed Make: Legrand/Anchor/ABB

Supply and fix Hylem sheet required as per existing size in site with screws suitably cutted for existing switch fixtures including taking down old unserviceable one and taken as credit complete all as specified and directed.

Supply and fix 11 watts CFL 2 pin type Make:Philips/Bajaj/Surya Roshini

Supply and fix 36 watts FTL fitting including taking down old unserviceable one and taken as credit complete all as specified and as directed.Make:Philips/Bajaj/Surya Roshini

Supply and fix 28 watts FTL fitting including taking down old unserviceable one and taken as credit complete all as specified and as directed.Make:Philips/Bajaj/Surya Roshini

Supply and fix 1X 36watt / 1x28 watts electronic ballast suitable for FTL fitting including taking down old unserviceable one and taken as credit complete all as specified and as directed.Make:Philips/Bajaj/Surya Roshini

Supply and fix PVC cord flexible 1.5 sq mm twin core twisted, copper, stranded for connection from ceiling rose to tube lights/fans etc including taking down old unserviceable one and taken as credit complete all as specified and as directed.Make:Finolex/polycab/Asian

Taking down ceiling fan 1200mm/1400mm sweep from any height and bringing down to floor, dismantling the ceiling fan Changing split pins, grease, packing and cleaning externally, re-assembling the ceiling fan and fixing in original position complete all as specified and as directed

Supply and fix Ball bearing for Ceiling fan/ exhaust fan.Make :SKF/NBC

Supply and fix Condensor for Ceiling fan/ exhaust fan make:UNIVERSAL/KELTRON

Material and labour for Removing the burnt out winding of ceiling fan of any size, cleaning the slot, rewinding with super enamelled copper wire of suitable size, varnishing heating and insulating and refixing in original position complete all as specified and as directed.

All as per Item No. 100 here in before but exhaust fan of size 300mm/450mm sweep.

Material and labour for Painting of ceiling fan of any size/make/model complete in site with one coat of synthetic enamel paint by brush including filling cavities with fillers including preparation of surfaceby removing dust etc and rewriting the fan number etc all as directed.

Supply and fix Fan blade 03 Nos high quality for 1200mm /1400mm sweep ceiling fan

Dismantling following unserviceable items/parts from water heaters of any capacity/make/model, supply and fix new items/parts of same capacity/type/model and connecting up and testing :-Make:Recold/ Bajaj

Heating element 2.0 KW capacity AC 230 V and conforming to IS specifications screw/flange type.Make:Recold/ Bajaj

Thermostat suitable for water heater upto 50 litres capacity.Make:H-GURU/PIE BIG

Neon indicators

Geyser bottom assembly

Outer body assembly of geyser

CP Non return valve 15 mm dia size.Make:KIRLOSKER/L&T/LEADER

PVC connections with brass check nuts 15 mm dia x 45 cm long for hot water supply.Make:Prayag polymers /Shakti Enterprises

Supply and fix High eficiency 2x2 recess LED Flat panel 42W recessed mounting LED luminaire suitable for amtrong/grid ceiling with super bright LED etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Including taking down old U/S fittings complete all as specified and as directed MakePhilips Cat No:RC365B LED33- 6500 PSU OD WH or equivalent price, specification and cat part no in M/S WIPRO

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20 S PSU CW GR S2 or equivalent price and specification in M/S Wipro /M/S Bajaj

Supply and fix LED Tube light Batten suitable for 18 watts LED tube light with integrated LED driver etc. complete all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed.Make: Bajaj, Cat No: 112181 BLRB-DB 118 or Philips/Wipro

Supply and fix LED Bulk head fitting 10W pressure die cast housing IP 66 Protection and lk09 impact resistance suitable for surface and wall mounting applications Make : Philips Cat part No: WT202W LED 6S NWPSU S2 PC In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj

Supply and fix 9W LED Mirror Light with aluminium body and IP 20 Protection ,AC 140-265 V Make : Luker CAT part No.: LMR9 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Philips

Supply and fix 5 watt retrofit LED Bulb, Make : Syska Model : Standard B22/wipro/philips

Taking down unserviceable Electric meter of any type and capacity from meter box and removing and deposit to MES store complete all as specified and as directed.

Supply and fix Single Phase KWH Energy meter 5-30A with optical port with LCD display Make : L&T, Model : WM101BC5DDH/HPL

Supply and fix 3 Phase 4 Wire KWH Energy meter Base mounting mtg 240V 5 -10 A, Make : L&T, Model : WM301BC3C00/HPL

Supply and fix Plastic safety cover for 5A/15 Sockets.

Note: Orginial GST paid PV's/TC for the materials procured for the above BOQ items shall be produced alongwith the payment claimed by the contractor.

Anand electrical

muthu constructions