Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.3 L+₹3.5 L (10.4%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹38.9 L+₹5.1 L (15.0%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Kislay Kishore, IDSE
GE (AFA) Hyderabad PIN-500043
PROVISION OF ACADEMY LOGISTIC SECTION AT AFA HYDERABAD
2022_MES_535774_2
8254/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AFA) Hyderabad
As per tender documents
4 documents required · 4 mandatory
₹500
GE (AFA) Hyderabad
₹78,000
Yes
5 Nov 2022
12 Aug 2022
7 Sept 2022
12 Aug 2022
5 Sept 2022
20 Aug 2022
12 Aug 2022 - 19 Aug 2022
Amount
Providing and fixing in true horizontal level false ceiling grid system manufactured by M/S ARMSTRONG WORLD INDUSTRIES US/UK or equivalent using hot dipped galvanised steel section exposed surface chemically cleaned capping, prefinished in baked polyester paint, main Tee of size 3000x32x15mm at every 1200 c/c, max and 1200mm cross Tee of size 1200x32x15mm at every 600mm c/c, max and 600mm cross Tee of size 600x32x15mm at every 1200mm c/c max and 3000x19x19mm wall angle all around the wall to form grid size of 600x600mm and suspending the grid using 2mm pro-straightened GI wire and 6mm nylon raw plug at every 1299mm intervals at the main tee and laying ARMSTRONG ULTIMA MICRO LOOK manufactured by armstrong world industries or equivalent all as per manufactures instructions and as directed by Engr-in-charge
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed by Engr-in-charge.
M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Eng-in-charge.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone agg) 75mm thick as in floor sub base etc all as specified and as directed by Engr-in-charge
M&L for pressed precast concrete interlocking paver block any shape and size conforming to IS 15658 - 2006 of 60 mm thickness M-35 grade with grey cement and pigment , laid over and including required sand cushing of 50mm thick (Avge), sealing the edges complete all as specified and directed by Engr in-Charge.
M & L for plain cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) as in coping cills, bands, bed plates, kerbs etc including necessary form work, weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed by Eng-in-charge
Removing excavated surplus soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed by Eng-in-charge.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed
Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in Soft/Loose soil all as specified and directed by Engr-in-charge
M&L Plain cement concrete 1:2:4, Type B2 ( using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc., comeplete all as specified and directed.
M&L for 50 mm thick PCC 1:2:4 type B-1 ( using 20mm graded stone aggregates) as in flooring, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 3mm thick Glass dividing strips having width 38mm inserted in position conform to design complete all as specified and as directed.
S&Fof Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240. complete all as specified and directed by Eng-in-charge
S&F of MS plates Fe 410W Gde E250 in trusses (framed), etc connecting with bolts/welding as baseplates/connecting plates etc complete all as specified and as directed.
S&F for MS bolts and nuts made with hexagonal or square headed one end and screwed the other and to be fitted with washer and one nut n exc 30 cm long complete all as specified and as directed
Dismantalling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of any colur having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of any colur having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.
M&L for preparation of old/previous treated steel surfaces and applying one coat of synthetic enamel paint of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed.
S & F Aluminium door with powder coated aluminium section 100 x 44 x 2 mm thick for frame / chowkats fixed in existing opening including necessary joining cleats, suitable hold fasts, screws etc and glazed shutters made with powder coated aluminium section 84 x 44 x 2 mm for stiles, top and middle rails and 112 x 44 x 2mm for bottom ralls shutter including 5 mm thick tinted/frosted glass panel inserts with necessary joining cleats, glazing clips, rubber packing, aluminium snap bearing screws etc including handles, tower bolts, mortice locks 4 lever 100 mm size, rubber gaskets etc, all sections as per manufacture's instructions, frames firmly secured to jambs/ window cills with all necessary fittings and fixtures complete all as speciied and directed by Engr-in-Charge. (Thickness of powder coating not less than 50 micron).
M & L for Non skid ceramic coloured, design printed tiles 7 to 8mm thick (square rectangular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including screed bed in CM(1:4) 15 mm thick complete all as specified and as directed.
S&F glazed ceramic design/printed tiles in vertical surface 450 x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including rendering/ backing coat in CM (1:4), 10mm thick complete all as specified and as directed.
Complete removal of existing treatment on oldwall surfaces and preparing surfaces of walls and applying two coats oil emulsion distemper complete all as specified and as directed.
Complete removal of existing treatment on old cei;ling surfaces and preparing surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.
Taking up or down PVC pipe/ steel tubing and connections, including fittings for refixing or removal etc upto 25mm bore complete all as directed.
S&F of 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F of 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F in repair of Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe all as specified and as directed..
S&F in repairs of Angle cock of 15mm dia chromium plated complete all as specified and as directed.
S&F in repair Vitreous China wash basin, white, flat back, size 550x440mm (excluding taps, chain and plug and porcelain stopper but including brackets, CP waste coupling and waste pipe) (flat back or angle back type) any size and 32mm dia waste pipe, including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and as directed..
S&Fin repair pillar taps, 15mm bore , cast copper alloy, with capstan heads , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair vitreous china urinals, half stall type,complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement; flush pipe, grating and Union for discharge pipe including waste pipe & connection with waste pipe complete all as specified and as directed...
S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing complete all as specified and as directed...
S&F in repair of PVC connections 15mm size with brass nuts of length 450mm all as specified and as directed...
S&F in repair of stainless steel gratings 100mm dia, fixed with suiable solvent cement etc complete all as specified and as directed...
Dismantling of cast iron drain pipes with fittings, 100mm dia jointed in cement mortar all as specified and as directed..
S&F of Cast iron soil, waste and vent pipes, sand cast 100 mm dia in any length with or without ears, with cement joints fixed to walls complete all as specified and as directed.
S&F in repairs of cast iron bends 100mm dia with cement joints complete complete all as specified and as directed.
Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) all as specified and as directed..
Taking down chowkats or frames with shutters (without) taking of shutters) from the frame n.exc 1.5 Sqm each all as directed
S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed..
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and as directed..
S&F 100 mm long butt hinges of extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-12, complete all as specified and as directed..
S&F 100 mm long aluminium handles cast type anodised all as specified and as directed.
S&F 100 mm long aluminium anodised barrel tower bolt of extruded section all as specified and as directed..
S&F steel windows with side hung shutters incl Box type hinges with steel handle and steel peg stay and 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane., complete with glazing bars, dovetailed or welded all as specified and as directed..
S&F of steel ventilator with top hung shutter including hinges, steel peg stay,etc and 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane., complete all as specified and as directed..
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of redoxide zinc crome primer of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, build in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removal of unserviceabledebris off the premises as directed by Engr-in-Charge.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 etc all as specified and as directed by Engr - in - Charge.
Making good under cills or over arches, lintels and bressummer incl all pinning when necessary in CM (1:4) all as specified and as directed..
S & F TMT bars 6 mm to 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed..
Taking down cement plaster from walls built in cement mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc. to receive plaster and removing the rubbish off the premises complete all as specified and as directed..
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement all as specified and as directed..
S & F powder coated aluminium windows shutters and frame, sliding type, three track without sash bars, including 5mm thick glass & SS wire mesh aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips ,rubber packing, anodised aluminium snap beading screws etc complete all as specified all as specified and as directed. Note (Powder coating shall not be less than 50 micron)
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified and as directed...
Taking down carefully unserviceable point wiring of light points, fan, socket,AC point out let on TW battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, light fittings etc and removing the materials from site and making good the disturbed portion of walls/floors ceiling etc to matcy with existing finish complete all as specified and as directed.
Taking down ceiling fan/ wall mounted fan, dismantling blades and removing( fan will be keep in safe custody by the contractor with proper inventory) and refixing ceiling fan,wall mounted fan after completion of re-wiring and connecting up by cleaning/oiling etc including provision of 3 core flexible round cable from ceiling rose or connector to fan all as directed.
Taking down unserviceable MCBs, DBs, Main switches complete all as specified and directed.
M & L for Point wiring with 1.5 Sqmm multistranded copper conductor wire with unsheathed FRLS grade PVC insulated, single core cable with earth continuity conductor of 1.5 sqmm FRLS grade PVC insulated multistranded copper conductor and including rigid PVC concealed conduit of suitable size but not less than 20mm dia. and all accessories fixed to be consealed in wall & surface of the roof etc., including terminal boxes made out of MS sheet of thickness not less than 1.2mm thick for fixing of switches, fan regulators, socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, etc complete all as specified and as directed for following:-
(a) One light point controlled by one switch
(b) One ceiling/Exhaust fan/Wall Fan point controlled by one switch
(c) One three pin socket 5 Amps point on independent board
(d) One three pin socket 5 Amps plug point on same board
All as per Ser item No 4 above but with 2.5 sqmm copper cable in and including PVC conduit complete all as specified and as directed for 15A socket.
S & F switch socket combination 5 in 1, 5/16 amps multipurpose flush type in independent board complete all as specified
S & F switch socket combination 2 in 1, 5 Amps Flush type 5 pin multipurpose suitable for independent board complete all as specified
M&L for Socket outlet 2 in 1, 3 pin, 5 and 5 amp flush type, 230 volts all as specified and directed by Engr-in-Charge
S&F of ceiling rose, three terminal, PVC/polycarbonate, insulated body, ISI marked complete all as specified and as directed.
Supply & fixing Switch piano, flush type single pole, one way 5 Amp all as specified and directed by Engr-in-Charge
Supply and fix stepped type electronic fan regulator flush type all as specified and as directed by Engr-in-Charge
S&F surface mounting/wall mounted LED tube light fitting 1x20/18watts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size including taking out old unserviceable one complete all as specified and directed by Engineer-in-Charge.
S & F 1X36 to 40W high efficiency 2X2 recess mounting LED light fitting with glare free homogeneous illumination including LED driver with all accessories internally pre-wired, connecting up with three core twisted flexible copper conductor cable complete all as specified and directed by Engineer-in-Charge.
S&F surface mounting LED light fitting of 18 W LED round complete with inbuilt driver, 230 V with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-charge.
S &F 1X36 to 40W high efficiency 2'X2' surface mounting LED light fitting with glare free homogeneous illumination including LED driver with all accessories internally pre-wired, connecting up with three core twisted flexible copper conductor cable complete all as specified and directed by Engineer-in-Charge.
M&L for Sub Main wiring with 4 x10 Sqmm 1100 V grade (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor drawn through medium grade, rigid non-metallic PVC conduit of size 25mm or higher suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with two run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dully complete including taking down old submain wiring all as specified and directed by Engineer-in-Charge. Note :- (i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.
(ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
(iv) Six runs of cable and one run of PVC conduit will be measured as one uint.
M&L for Sub Main wiring with two run of 6 Sqmm 1100 V grade (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor drawn through medium grade, rigid non-metallic PVC conduit of size 25mm or higher suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable but green in colour as continuous earthing wire and connecting to common earth dully complete including taking down old submain wiring all as specified and directed by Engineer-in-Charge. Note :- (i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.
(ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
(iv) Three runs of cable and one run of PVC conduit/casing caping will be measured as one uint.
M & L single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V 50 Hz AC complete all as specified.
S&F of MCCB DB VTPN 8 way vertical type IP-43 protection 415 volts AC 50 Hz with including suitable provision for 4 pole MCCB incomer, and MCB/RCB/SP/SPN/TPN as out going with tinned copperbusbar neutral link earth complete all as specified and as directed.
S&F MCB SP 6 TO 32 a 10 KA rupturing capacity complete all as specified and as directed.
S&F MCCB 4 pole 63 Amp 16 KA breaking capacity 415 volt 3 phase supply comlete all as specified and as directed.
Suply & fixing perforated cable tray, made of 2.0mm Galvanized iron steel sheet, duly bended to required shape by sheet bending machine, including cover, made of 1.2mm thick Plain Galvanized iron sheet duly screwed with the cable tray and duly fixed on the wall/ceilings including suitable Galvanized iron brackets or hanging from the ceiling with suitable suspender as required at site all as specified and as directed by the Engineer -in Charge for the following sizes
a) 152mm width
a) 114mm width
S& F ceiling fan complete with electronic type regulator and accessories 230 V 1200 mm sweep BEE 2 star rated and connecting up including provision of cable from ceiling rose or connector to fan and making necessary hanging arrangement of ceiling fan by providing U-type clamp with fasteners, bolt washer including grouting complete all as specified and directed by Engr-in-Charge.
S&F exhaust fan with louvers 300mm sweep single phase 240 V AC 50 Hz and connecting up including louvers including making necessary openning on stone/brick masonary wall of suitable size, finishing it properly and making good to match with existing finish/ colours with the surrounding provision of cable 3 core of size 0.5 Sqmm from ceiling rose to fan complete all as specified and directed.
M & L for shifting of existing wall split unit indoor/outdoor AC complete with colours remote control unit for operating on 230 volts, 50 Hz single phase AC supply and outdoor (condensing) unit to be installed on 25 mmx25mmx3mm new angle iron frame fixed on bracket duly painted complete in all respect of all including refilling of gas and copper refrigerant pipes for suction & discharge lines of standard size as required duly insulated condensate water outlet PVC pipe laid up to ground level and 3 core copper wire of required length for stabiliser to indoor/outdoor unit all as specified and as directed.
S & F single phase modular type motor starter 32 A, 240 Volts, 50 Hz for split Acs including cover plate and PVC surface box of suitable size complete all as specified and as directed.
M&L for earthing complete with Galvanised steel earth plate eletrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth strip 25X4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I all as specified and directed by Engr-in-Charge
M&L for earthing complete with Galvanised steel earth plate eletrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth wire 4 mm dia earth lead connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 30 mm dia GI pipe medium grade for protection of GI earth lead and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I all as specified and directed by Engr-in-Charge
M/S NAVEEN BUILDERS
Deepika Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .