Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L1 | Accepted-AOC Lowest | |
| 2 | L2₹38.1 L+₹1.2 L (3.13%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L2 | Rejected-Finance L2 | |
| 3 | L3₹38.6 L+₹1.6 L (4.37%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹44.2 L+₹7.3 L (19.7%)Rejected-Finance MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance L4 |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
21 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
SPL REPAIRS TO BLDG NO P-111 OF SINGLE JCOs LIVING ACCN AT 7011 EME BN AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT
2024_MES_643494_1
GE/JULL/ET-75/2023-24
Open Tender
Civil Works
Item Rate
183 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹95,000
Yes
19 Apr 2024
21 Feb 2024
29 Mar 2024
21 Feb 2024
21 Mar 2024
9 Mar 2024
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified
Material and labour for non skid joint free ceramic coloured tiles of area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm and 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
All as per srl item No 2.00 here-in-before but on skirting etc over and including 10mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified
Material and labour for coloured glazed tiles of size 450x350x7mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 15mm thick rendering in CM 1:4, all as specified and directed
Material and labour for Chequered cement concrete tiles 25 cm x 25 cm x 20 to 22 mm thick, with grey cement and pigment, set jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified.
Demolition of cement concrete of any description and in any position and removing surplus spoil out of defence land where directed at a level not exc 1.5 m above the starting point all as specified and directed
Material and labour for 50mm PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified
Dismantling of brick tiles single layer as in roof covering complete all as specified
Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) all as specified
Material and labour for Bitumen Primer shall be applied on plastered surface of roofs at the rate of 0.40 Kg/Sqm of Surface area of roof for use in water proofing and dump proofing treatment complete all as specified and directed
Material and labour for painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 as a bonding material in two coats one on primed surface & 2nd on APP based polymeric membrane at the rate of 1.20 kg/sqm all as specified
Material and labour for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non wove fabric (wt. Not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified
Material and labour for 40 mm thick brick tiles with 15 mm thick bedded layer of 1:3 CM laid on 2nd bitumen coated surface and joints grouted flush mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified .
Material and labour for cutting out cracks to V-section in existing RCC roof slabs or terracing , cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) all as specified
Material and labour for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof and wall surfaces complete all as specified
Material and labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed
Material and labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sides of rounded or chamfered on edges of interlocking tiles complete all as specified and directed.
Material and labour for precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chaajas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed
Taking down chowkats or frame not exc. 1.5 sqm each with shutters (without taking off shutters from the fames) complete all as specified
Taking down chowkats or frame exc. 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the fames) complete all as specified
Supply and fixing structural steel framed work as in doors frame or gates of angle or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.
Supply and fixing 2nd class hard wood 35mm thickness of factory made plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed
Supply and fixing 2nd class hard wood 35 mm thick glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I, sector 8, clause 8.20 (a) complete all as specified and directed
Supply and fixing butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and directed.
Supply and fixing 300 mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.
Supply and fixing Mild steel pressed handles oval type stove enamelled black 150 mm size complete all as specified
Supply and fixing Mild steel barrel tower bolts, 200mm long, stove enamelled black, with bright bolt complete all as specified
Supply and fixing PVC solid door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet and edges will be painted to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II complete all as specified
Supply and fixing factory made Solid PVC Moulded Door Shutters with particle board core, 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front Face & 2mm Prelam PVC sheet on back face all as per specification & drawing
Supply and fixing 30mm thick factory made PVC Flush Cup board shutter consisting of panel of hollow section thickness . Consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles. top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws Hollow PVC profile shall be lipped with 10 mm ( 5mmx 2) thick x 20mm width on stiles and rails using solvent cement . The inner panel shall be laminated with 5mm thick thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. Complete all as specified as per direction of Engineer-in-Charge
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour 10mm thick PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing brass butt hinges, 100mm medium weight complete all as specified and directed.
Supply and fixing 125 mm Extruded Brass Handle fabricated type complete all as specified and as directed.
Supply and fixing 150 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified
Supply and fixing 150mm Brass barrel tower bolt of extruded section complete all as specified and as directed
Supply and fixing steel windows 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated comprises of glazed shutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 No per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 No per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 No per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf. (g) Fabrication and fixing arrangement complete. Note:- Grill / guard war , glass pane shall be measured and Paid separately
All as per Srl item No. 36.00 here-in-before but in gauged shutters without sash bars all as specified and directed
All as per Srl item No. 36.00 here-in-before but in ventilators fixed type
Supply and fixing framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars parallel iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified
Supply and fixing galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified.
Material and labour for 4.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified.
Material and labour for mild steel pipe 25 mm dia curtain road with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified.
Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc any description complete all as specified
Material and labour for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified
Material and labour for 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface with water proofing compound finished even and smooth without using extra cement complete all as specified
Material and labour for 5mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified
Material and labour for preparation of new surfaces of ceiling including cornices, pilasters etc (Plastered or unplasterd surfaces) and applying three coats of white (Lime) wash complete all as specified.
Material and labour for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper including a coat of primer on plastered surfaces with two coat of Birla White Putty complete all as specified
Material and labour for preparation of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint over a coat of primer including filling holes by birla wall putty complete all as specified
Supply and fixing vitreous china wash hand basin, white, flat back 550x400mm including one number brass CP waste coupling ,32mm dia , PVC waste pipe with connector, brackets 2 Nos including cutting for and pinning in ends of brackets complete all as specified
Supply and fixing in repairs Pillar tap ,brass with capston head , fancy type chromium plated , screwed down high pressure with or without lettered 'Hot' or cold with long screwed for 15mm bore iron pipe and fixed complete all as specified & directed
Supply and fixing 15mm Brass CP mixer for mixing hot & cold water for wash hand basin with all fitting screwed down for iron pipe and fixed all as specified and directed.
Supply and fixing Brass chromium plated tubular tower rail 20mm dia, D type, 60cm long between flanges in repairs complete all as specified and directed
Supply and fixing vitreous china wash down water closet (Pedested pattern ) white including fixing bolt, plastic water closet seat cover white closed pattern, with & included arrangement of jet spray with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified directed by Engineer-in-Charge
Supply and fixing brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union in repair complete all as specified
Supply and fixing Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .
Supply and fixing Toilet Roll Holder all as specified and directed by Engineer-in-Charge
Supply and fixing acrylic corner set of 3 pieces as per sample approved by Engineer -in-Charge all as specified and directed
Supply and fixing seat cover for water closet pedestal pattern all as specified
Supply and fixing PVC valve less, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brackets fixed in repairs complete all as specified and directed
Supply and fixing 15mm stop valves fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply and fixing PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete all as specified and directed
Supply and fixing fancy type Bib tap cast copper alloy suitable for 15mm bore iron pipe with long body fancy type, fixed in repairs complete all as specified and directed
Supply and fixing Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified
Supply and fixing in repair CP grating 125mm dia with centre hole all as specified and directed by Engineer-in-Charge
Supply and fixing medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed.
Supply and fixing medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed.
Supply and fixing 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.
Demolition and braking up drain pipes AC/PVC pipe in event n.exc 150 mm dia including all fittings complete all as specified
Supply and fixing for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified
All as per Srl item No. 71.00 here-in-before but 75mm dia
All as per Srl item No. 71.00 here-in-before but 150mm dia
Supply and fixing PVC (SWR) bends 110mm with access door complete all as specified and directed
All as per Srl item No. 74.00 here-in-before but 75mm with access door
All as per Srl item No. 74.00 here-in-before but 150mm
Supply and fixing 110mm PVC (SWR) vent cowl complete all as specified and directed
Dismantling of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed
Demolition of brick work built in cement mortar including all quions, arches pillars etc but excluding precast concrete ariticles complete all as specified and directed
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge
All as per Srl item No. 81.00 here-in-before but except brick
Material and labour for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge
Material and labour for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge
Material and labour for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete including 20mm thick screed bed in CM 1:6, complete all as specified and directed.
All as per item No 85.00 here-in-before but as in skirting laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.
Material and labour for 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed & directed.
Supply and fixing false ceiling with Everest fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed
Supply and fixing plain, galvanised, mild steel sheeting 0.80mm ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed
Material and labour for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates Fe-410W (Gde E 250) quality A complete all as specified and directed
Material and labour for preparation of old surfaces and applying two coats of white wash on plastered surfaces of walls complete all as specified
Material and labour for glazed ceramic coloured tiles of size 300 x 200 x 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed
Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished rough to receive top layer complete all as specified and directed
Material and labour for 100mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.
Material and labour for hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed
Material and labour for 30mm sand cushion, filling under floors or in foundations including watering and consolidation complete all as specified and directed
Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over complete all as specified and directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE.
Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
Excavation over areas n.exc. 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed
Excavation over areas exc. 1.5m but n.exc 3m in depth and getting out in soft/ loose soil complete all as specified and directed
Material and labour for cement concrete 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations and mass concrete complete all as specified and directed
Material and labour for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in foundations, filling, mass concrete and necessary formwork etc complete all as specified and directed
Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.
Material and labour reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed Note : Reinforcement where provided shall be measured and paid separately.
Material and labour for cement concrete (1:2:4) type B-0 (using 12.50mm graded aggregate) as in surface channels, drain complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified.
Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Taking down carefully existing point wiring of any type/ any size (i.e on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface of walls, roof, floors etc. with any type of civil work involved complete all as specified and directed
Material and labour for point wiring for one light/Fan point controlled by one switch with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and including steel sunken boxes of suitable for modules for modular fitting/accessories including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge
All as per Srl item No. 112.00 here-in-before but for one socket outlet 5 Amps on independent board complete all as specified.
All as per Srl item No. 112.00 here-in-before but for one socket outlet 5 Amps on the same board controlled complete all as specified.
All as per Srl item No. 112.00 here-in-before but for one bell point controlled by one bell push complete all as specified.
All as per Srl item No. 112.00 here-in-before but with 2.5 Sqmm (nominal area) FRLS copper cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.
Supply and fixing switch piano flush type, 6 Amps, 240 Volt AC single pole, one way complete all as specified.
Supply and fixing switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete all as specified.
Supply and fixing piano socket out let 6 Amp, 5 pin, 2-in-1 flush type complete all as specified.
Supply and fixing piano socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type complete all as specified.
Supply and fixing in replacement bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed.
Material and labour in replacement call bell electric AC (Ding Dong) 240 volt SP complete all as specified.
Supply and fixing ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified.
Supply and fixing five step fan regulator, electronic type, single phase, including connection complete all as specified.
Supply and fixing lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with matching colour back plate all as specified and directed
Material and labour for sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through new PVC rigid non concealed metallic conduit (medium grade ISI marked) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm PVC insulated with green insulation complete all as specified. Note: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC conduit shall be measured as one unit.
Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket (for Geysers) complete with one single pole MCB of 16 amp 240 V 10 KA complete all as specified and as directed.
Supply & fixing LED retrofit lamp 9W , 6500K, 220-240V with base cap B-22. complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed
Supply and fixing energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 25/35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of 25mm bore and MS clamp duly painted with two coat paint all as specified and directed
Material and labour in replacement for sheet metal DB for MCBs, SPN, 4 ways 240V, double door, single phase, with 200 Amps rated bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified. Make: EKINOX3 series of Legrend/Acti 9 metalic series of Schneider/Optipro of Indoasian/Osafe of HPL/Metallica of Havells.
Supply and fixing in repair VTPN DB 4 way double door, suitable for MCCB 63 Amp, having copper bus bar for neutral and earth, blanking strips complete all as specified and directed.
Supply and fixing MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider complete all as specified and directed by Engineer-in-Charge
Supply and fixing MCB SPN 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair MCCBs 63 Amp 4 pole 415 V, fixing type with breaking capacity 16 KA complete all as specified and directed.
Material and labour for XLPE insulated, PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 3½ core complete laid in trenches passing through pipes/culverts all as specified and directed by Engineer-in-Charge.
Supply and fixing exhaust fan, 300 mm sweep, 900 rpm, single phase, 230 volt, heavy duty, with louvered shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, making the hole in wall including necessary civil/ plastering work to match the disturbed surface complete. Make : Havells Model Turbo Force/Crompton/ Bajaj/ Khaitan
Material and labour for cutting holes for exhaust fan of size 300mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled portion in cement mortar 1.3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed
Earthing complete in replacement with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and including GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Material and labour for taking down Geyser of any capacity or model after disconnecting water supply and electric connections and reconnecting and refixing the same all as specified and directed
Material and labour for taking down carefully ceiling fan of any sweep, type & model and refixing the same after repainting of fan, filling of cavities with filler one coat after cleaning of all dust etc including replacement of flexible wire rubber reel, nut, bolts complete all as specified
Excavation in trenches in soft/Loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in -Charge.
Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, compressive strength of brick shall not be less than 160 kg/cm² adjacent/abutting each other complete all as specified and directed by Engineer-in-Charge.
Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and as directed
Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed
S S CONSTRUCTION
KABEER CONSTRUCTIONS
M/s GURFATEH BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .