REPAIR TO SUNKEN FLOORS, WALL SEEPAGE, PLUMBING AND SANITARY FITTING, IN NO 2 AND 3 AREA AT

Amount

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and directed by Engineer-in-Charge

All as above item No 01above, but except bricks complete all as specified and directed by Engineer-in-Charge

Rendering 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge Note : Rate for form work if requd to be included in the rate quoted by the contractor

Rendering 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement, ncluding taking down existing plaster with two coats of exterior emulsion paint on new surface complete all as specified and directed by Engineer-in-Charge Note : Rate for form work if requd to be included in the rate quoted by the contractor

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster complete all as specified and directed by Engineer-in-Charge

Rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of weather proof emulsion paint for facia, chajja, and roof projection etc complete all as specified and directed by Engineer-in-Charge

Preparation of new or previously untreated surfaces of wall and applying two coats of oil bound distemper over a coat of white wash complete all as specified and directed by Engineer-in-Charge

Preparation of new or previously untreated surfaces of wall and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge

Preparation of new or previously untreated surfaces of celing and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge

Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth, 75mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engineer-in-Charge

Cement concrete 1:2:4, 40mm thick type B-2 (using 20mm graded agg) as in Floor, finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engineer-in-Charge

Non-skid coloured ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and dismantling/demolition on existing surface complete all as specified.and directed by Engineer-in-Charge

All as per above item No 12 but as in skirting on 10mm thick rendering in cement mortar 1:4.incl dismantling existing wall tiles as in skirting complete all as specified and directed by Engineer-in-Charge

Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and dismantling existing wall tiling complete, all as specified.and directed by Engineer-in-Charge

Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing one complete all as specified.and directed by Engineer-in-Charge

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge

S & F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete as specified and directed by Engineer-in-Charge

All as per Srl item No 18 above, but fixing only

S & F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete as specified and directed by Engineer-in-Charge

All as per Srl item No 20 above, but fixing only

Cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair Vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of length up to 700 mm or as per site requirement , complete incl making good to floor all as specified and directed by Engineer-in-Charge

Supply and fix in repair Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour,back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair Vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified and directed by Engineer-in-Charge

Supply and fix in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified and directed by Engineer-in-Charge

Supply and fix in replacement Stainless steel plate rack of size 900mm X 900mm X 250 mm all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib taps cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair 15 mm dia stop valve/angle valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 15mm stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed bot ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge

Supply and fix Brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge

PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) with spout pipe 50 mm dia up to 600 mm long or as per site requirement including demolition of existing surface complete all as specified and directed by Engineer-in-Charge

Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume complete all as specified and directed by Engineer-in-Charge

Rendering of 10mm thick in CM 1:3 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair Grating round with/ without hole 100mm/75 mm size of CP complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls all as specified and directed by Engineer-in-Charge

All as above item No 40 above, before but 75mm bore.

Supply and fix 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge

Supply and fix 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore PVC (SWR) bends copmplete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 75 mm bore PVC (SWR) bends copmplete all as specified and directed by Engineer-in-Charge

GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with CM 1:3 with and including water proofing @ 200 ML per bag complete all as specified and directed by Engineer-in-Charge.

pardeep singh marwaha

M.B TUBE AND ALLIED IND. Contr

Vijay Kumar Contractor and Engineers