WELCOME MAINTENANCE OF OFFICER MD ACCN AND CERTAIN REPAIRS TO SEWAGE LINE, MANHOLES, STP AT ZONE-I AREA UNDER AGE BR-I OF GE NAGROTA.

Amount

Preparation of surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall including cornices etc and applying one coat of white wash upto four storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed.

All as per ser item No 1.00 here in before but applying one coat of white wash on ceiling.

All as per srl item No 1.00 here in before but applying one coat of cement base paint on walls.

All as per ser item No 1.00 here in before but applying one coat of exterior emulsion paint.

Preparation of old plastered or unplastered surface of wall and applying minimum 3 mm thick wall putty and applying two coats of oil emulsion distemper over one coat of primer upto three storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed.

Preparation of old plastered or unplastered surface of wall and applying one coats of oil emulsion distemper over one coat of primer upto three storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed.

Prepration of old or previously untreated wood or wooden based surface of any description, over 10 cm width or gridth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Prepration of old or previously untreated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats cement base paint over a coat of primer, complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying minimum 3 mm thick wall putty and applying two coats of oil emulsion distemper over one coat of primer upto three storie building including scafolding arrangement, trestles, ladders etc, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 400x 400 x 7 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:6 including dismantling of existing tiles, complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 300 x 200 x 7mm/450x300x7mm thick as in vertical surface, dado/skirting, over and including 10 mm thick screed bed in CM 1:4 including dismantling of existing tiles, complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm but n. exc 0.42 Sqm as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 10 mm thick screed bed in cement mortar 1:4 including dismantling of existing tiles, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n. exc. 4.00 sqm each and removing from site, complete all as specified and directed.

S&F pressed steel frames factory made for doors with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed.

S & F 35 mm thick second class hard wood factory made plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

Box type steel ventilators top hung double shutters (inside for wire mesh out side of glass) including guard bar, hinges, steel handles, tower bolt and steel peg set complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surfaces before fixing steel windows shall be conforming to relavent IS, complete all as specified and directed.

S&F aluminium anodised door shutter side hung type with style, rails ( Top, Bottom & lock rail) Top rail meeting style, lock rail size 48x44mm, bottom rail size 108 x 44mm, frame (for chowkat & fixed glazing) size 38 x 63mm all are made from anodised aluminium section including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size including 5mm thick frosted sheet glass at top and 6mm thick particle board at bottom etc, complete as specified and directed.

Prepration of new wood or wooden based new or previously untreated surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S & F Galvanised mild steel wire 0.56mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples to all door/window/vent shutters, complete all as specified and directed.

S & F Anodised aluminium window grill 8mm dia ornamental type (design/pattern as approved by Engr-in-Charge), complete all as specified and directed.

S & F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm plain colour PVC sheet on back face, complete all as specified and directed.

S & F Solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S & F 150 mm aluminium handles cast type anodized, complete all as specified and directed.

S & F 300 mm long mild steel helical door springs including roller and roller plate complete and necessary welding required, complete all as specified and directed.

S & F 100 mm long hasp and staple aluminium anodized with steel hinge pin including bolt to hinge plate, complete all as specified and directed.

S & F 25 mm dia drapery rods plastic coated fixed on wall including funnels and brackets, complete all as specified and directed.

S&F in repair 600mm long CP towel rail fixed with and including chromium plated brass screw, complete all as specified and directed

S&F 1.00mm thick stainless steel sink for kitchen or laboratory with plug, waste pipe, washers including bedding in cement mortar on to dwarf wall or fixing cantilever cast iron brackets connecting union etc., over all size 915 mm x 460 mm x203 mm with bowl size 405 mm x 354 mm x 203 mm with waste coupling, complete all as specified and directed.

S&F in repair Stainless steel plate rack made out of 0.63mm thick sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties complete all as specified and directed. Make - Blue Star /Nirali/neelkanth.

S&F in repairs shower rose 125mm, CP, with otr without swivel joints, any size including fixing to steel pipe or union,complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, flat back, size 550X400 mm including waste pipe, bracket and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug, complete all as specified and directed

S & F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed

S&F in repairs viterous china squatting any type pan 'Orrisa pattern' long pan size 580mm x 440mm white with P or S trap, front and Integral foot rests any pattern excluding flushing cistern and flushing pipe, complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 20mm bore ball valves high pressure of PTMT (Minimum weight 210 gm) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F 500 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank, complete all as specified and directed.

S&F 1000 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank, complete all as specified and directed.

S&F in repair 15 mm bore stop/angle valve fancy type , cromimum plated with long shank(concealed type) cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed.

S & F 15 mm pillar tap, chromium plated cast copper alloy, fancy type with capstan head, screwed down high pressure with and without levelled hot or cold with long screwed shanks and fly nuts screwed for pipe, complete all as specified and directed.

S&F in repair 40mm bore waste coupling brass, chromium plated for wash hand basin / sinks with long screwed shanks and fly nuts fixed. Complete all as specified and directed

S & F in repair 32 mm bore PVC waste pipe flexible including PVC waste coupling with minium length 800 mm, complete all as specified and directed.

S & F in repair 40 mm bore PVC waste pipe flexible including PVC waste coupling with minium length 800 mm, complete all as specified and directed.

M&L 15mm bore dia uPVC pipes of pressure rating 10 kgf/sqcm with all fittings (union, tee, socket, nipple, elbow) and fixing complete to walls, ceilings or in floors etc including Taking up or down steel tubing and connections 15 mm bore, complete all as specified and directed

M&L 20mm bore dia uPVC pipes of pressure rating 10 kgf/sqcm with all fittings (union, tee, socket, nipple, elbow) and fixing complete to walls, ceilings or in floors etc including Taking up or down steel tubing and connections 20 mm bore, complete all as specified and directed

S&F towel ring complete all as specified and directed

S&F in repair Hand Jet complete all as specified and directed.

S&F in repair Toilet paper holder chromium plated fixed, complete all as specified and directed.

Hacking out old glasses (any thickness, size, quality or description) from metal or wooden frame including punching or drilling out old glazing pins /spring clips or glazed putty or fixed with beads, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty fixed with bends glazing pins n exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repair PVC bath room mirror cabinet of size 600 x 450mm fixed to wall with screw and rawl plugs, complete all as specified and directed .

S&F in repair soap dish of cast copper alloy, chromium plated (CP), complete all as specified and directed.

S&F in repair Glass Shelf 550mm x 100mm Size with stainless steel rail in two row, complete all as specified and directed.

S&F 300mm corner glass shelf (with bracket) of jaguar cat part No ACN-1173 or equivalent in approved make, complete all as specified and directed.

M & L for 15 to 18 mm thick udaypur green stone (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over and including 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 250 and n exc 500 ltr, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 500and n exc 1000 ltr, complete all as specified and directed.

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs but n. exc 500 ltrs including dismantling and refixing if required, complete all as specified and directed.

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs but n. exc 1000 ltrs including dismantling and refixing if required, complete all as specified and directed.

S&F in repair seat cover for peddastel patern complete all as specified and directed.

S&F in repair 500 ltr water tank cover/Lid, complete all as specified and as directed.

S&F in repair 1000 ltr water tank cover,Lid, complete all as specified and as directed.

Cleaning/clearing of sewage line (including manholes except 1st manhole) 100mm to 350mm bore of any description under ground any depth, removing any type of blockage including desilting, descaling and de-chocking from drain with combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV having facility of high pressure vacuum including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed of directed including taking of manhole cover and re-fixing the same after cleaning, complete all as specified and directed.

Dewatering/Desludging & cleaning of manhole of any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20 meter in a ditch including necessary excavation of pits and covering with earth & spraying unslaked lime on the covered ditch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging, complete all as specified and directed.

Taking out/Pumping out contaminated sewage water from septic tank/soakage well including inlet/outlet chamber after plugging incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on HCV Honey sucker vehicle of capacity not less than 6000 Ltr each and facility of high pressure vacuum and removing and dumping off the same in the pit to a place out side cantonment at the place marked for the purpose by local municipality or the authority controlling area, complete all as specified and directed.

Desludging the solid sludge from septic tank, soakage well including inlet/outlet chamber, removing out all scum, silt reduce sludge (both organic/inorganic nature) after plugging the incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or area controlling authority, complete all as specified and directed.

Cleaning of soil waste pipe (cast iron/PVC )100mm bore laid in ground any slope or gradient and depth 3m by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20m in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc, complete all as specified and directed by Engineer-in-Charge.

Cleaning of soil waste pipe (cast iron/PVC ) 75mm/100mm bore by roding taking out all residue from the lines including water and depositing at a distance not less than 20m in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc, complete all as specified and directed.

All as per Srl item No 82.00 here in above but embedded in ground or floor.

Cleaning/clearing of IWC/ EWC, gully trap /floor trap including CI pipe / PVC pipe upto first manhole by roding, taking out all residue including waste and testing by pouring water after cleaning etc, complete all as specified and directed by Engr-in-Charge. (Note: Cleaning of PVC/CI pipe from first floor / ground floor embedded in floor or fixed to wall included in this item)

Cast iron oval access covers / inspection cover with bolts rubber gasket to make it water tight for 75mm/100mm bore CI fittings including taking out broken/ unserviceable cover with bolts etc and removing from site, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipe etc. n exc 10 sq m on plan and getting out in any type of soil, complete all as specified and directed.

Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil, complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed and at a level not exceeding 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and and mass concreate, complete all as specified and directed.

M & L for PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamferred angles and throughting, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

Mild Steel TMT bars 6 to 8 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed sotne aggregate) as in cover slab and similar articles including necessary moulds/form work set in Cement mortar 1:4, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using WPC (WPC to be measured and paid separately) finished even and smooth without using extra cement, complete all as specified and directed.

Supply only water proofing compound, complete all as specified and directed

M & L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes incluing packing under and haunching against the sides of pipes after laying and tested of 150 mm bore dia drain pipe, complete all as specified and directed.

M & L for 150mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes incluing packing under and haunching against the sides of pipes after laying and tested of 200 mm bore dia drain pipe, complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) and set in cement mortar, complete all as specified and directed.

M&L 150mm dia slat glazed stoneware drain pipes laid in tenches and jointed, complete all as specified and directed.

M&L for 200mm bore dia reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed by Engr-in-charge.

M&L for 150mm bore dia reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars, complete all as specified and directed by Engr-in-charge.

Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 1/4 section ) in PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching for 150mm dia of pipe, complete all as specified and directed.

S & F 100 mm dia bore Cast iron waste and vent pipes sand cast in any length with or without ears with cement joints laid in floors or fixed to walls with all fittings includign taking down the unservicable pipe with fitting, complete all as specified and directed.

S & F 75 mm dia bore Cast iron waste and vent pipes sand cast in any length with or without ears with cement joints laid in floors or fixed to walls with all fittings includign taking down the unservicable pipe with fitting, complete all as specified and directed.

S & F 100 mm bore dia Cast iron bend (any radius) with duck foot or heal rest including taking out old fitting, complete all as specified and directed.

S & F 75 mm bore dia Cast iron bend (any radius) with duck foot or heal rest including taking out old fitting, complete all as specified and directed.

Cast Iron branch pieces single(equal/unequal)ordinary or inverted (spigot or socket type)or with paralel branches for 100mm bore pipe with oval access door including taking out fitting, complete all as specified and directed.

All as per ser item No. 107.00 here in above but 75 mm bore pipe.

S & F in repairs 50mm bore dia cast iron cowls fixed, complete all as specified and directed.

S&F in repairs vitreous china squatting pan 'ORRISA' pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc including making good to floor, complete all as specified and directed.

S&F in repairs Wash down water closet (Pedestal pattern) with ‘P” or “S” trap vitreous china coloured including all fittings i.e seat cover, cistern super water saver dual, flush, complete all as specified and directed.

S & F in repairs 10 Ltrs capacity PVC valveles, less symphonic action type, flushing cistern low level, white with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 300x 300 x 7 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:6 including dismantling of existing tiles, complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing PVC pipe (any size and pattern) with all fitting, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor including taking down existing PVC pipe (any size and pattern) with all fitting, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing PVC pipe (any size and pattern) with all fitting, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor including taking down existing PVC pipe (any size and pattern) with all fitting, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends, complete all as specified and directed.

S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends to wall or roof for 75mm bore pipe, complete all as specified and directed.

All as per ser item No.123.00 here in above but 100 mm bore pipe.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 300 x 200 x 7mm/450x300x7mm thick as in vertical surface, dado/skirting, over and including 15 mm thick beding layer in CM 1:4 including dismantling of existing tiles, complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

M&L for hard core of broken bricks/stone boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for sand for 50 mm thick filling under interlocking pavor block including watering and consolidation, complete all as specified and directed.

M&L for 80 mm thick Machine pressed precast concrete interlocking pavor block any shape and size conforming to IS 15658-2006 of M-40 grade, complete all as specified and directed.

M&L for 20 to 22mm thick cement concrete chequered tiles, glossy finish, coloured, of any size and pattern as approved by GE as in patches in floor with set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of existing tiles, complete all as specified and directed.

cleaning of all types of blockage of Nahni traps/floor traps/bottle traps, blockages of WC's rain water pipes and similar works complete all as specified and directed by Engr-in-Charge:- Note: 1. Labour shall be provided by the contractor on daily basis from 9:00 to 17:00 hrs including all tools and plants. Each labour shall entertain complaints everyday in working hours. 2. The supervisor of contractor shall take all complaints from the compliant cell and do the all on same day. 3. Furthermore, the feedback shall be given by the contractor/supervisor to concerned JE from all aspect.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 64860.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/S Shankardass Devidass

ESS BURT AND COMPANY