GE(S)/M-36/2022-23

Amount

M&L Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance n. exc. 50m in soft/loose soil complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in kerbs of interlocking tiles rounded and champhered on edges complete all as specified and directed.

M&L for repairing to RCC sunshades, chajjas, balconies, bands, beams and similar RCC works at any position/height by dismantling loose/disintegrated portion and dubbing out with cement concrete 1:1.5:3, 40mm to 100mm thick using 6mm to 12mm graded stone aggregates to make up and finished to required shape including provision of necessary supports (if required) and removing corroded reinforced and binding new reinforcement as per site conditions and rendering with 5mm thick in CM 1:3 and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed. Note:- The quoted rate shall includes the cost of necessary scaffolding to execution of work and protective/safety measurers for height upto double storied buildings and nothing extra shall be admisible on this account. Note: Reinforcement will be measured & paid separately.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

All as per srl item No 5.00 here-in-above but (EXCEPT BRICKS) complete all as specified and directed.

S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (poly urathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011

S&F factory made 40mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long mild steel tower bolt, oval type stove enamelled black complete all as specified and directed.

S&F 125mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.

S&F 125mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolt with hasp and staple (bolt type) and fixing clips complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including vulcanised rubber complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-27/13 sheet 1/4 to 4/4.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chain link MS galvanisd medium coated as per IS 4826 fencing 75mmx75mm mesh and any dia of wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for plain 4mm dia mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed(each line of wire to be measured) conforming to IS 4826 complete all as specified and directed.

S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F "in repair" of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Fixing only "in repair" of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Taking down existing roof treatment of any description, including mud phuska or PCC pedding if any (any no of layers), plants/trees with roots including removal of dabries in low laying area exc. 1.00 KM but n.exc. 2.00 KM complete all as specified and directed.

M&L for 20mm thick screed bed and bedding layer in cement mortar 1:3 on existing RCC roof slab, finished even and smooth without using extra cement including and mixing with WPC @ 0.200ltr/ 50 Kg bag of cement, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in levelling course on existing roof or sunken floor of toilet portion, rounded and chamfered on edges, complete all as specified and directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying oil bound bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4, type B-0. (f) Top of membrane shall be provided with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

M&L for 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.

M&L for 50mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors s in floors finished the surface even and smooth using extra cement including cutting grooves n. exc. 1.50 Sqm in each panel complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 60mm thick, M-35 grade coloured machine pressed precast rubber moulded concrete interlocking (Red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed.

Roughening the surface of old concrete by picking, sweeping/brushing clean and washing down with water to remove dust and applying neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed.

M&L for repair work of machine cut kota stone slab flooring/ treads of steps 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges (if required) complete all as specified and directed.

M&L for machine cut kota stone slab as in vertical surfaces of riser of steps/pillars/skirting /dado 16-18mm thick over and including 10mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering on faces of brick work or concrete surfaces of ceiling in cement mortar 1:6, finished even and smooth without using extra cement , complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement on top layer, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of washable distamper white or tinted complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of exterior weather coat paint white or tinted complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of exterior weather coat paint white or tinted over 1mm thick wall care putty to make surface smooth, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new surfaces of surfaces of steel & iron work of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new surfaces of wood & wooden work of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

M&L for dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, ground masonry, etc. and making good disturbed ground complete all as specified and directed.

M&L for dismantling barbed wire fencing of any description, shape etc complete all as specified and directed.

Demolition of (unreinforced) cement concrete n. exc. 15cm thick below and above ground level complete all as specified and directed.

Demolition of (unreinforced) cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down existing rolling shutter and refixing to same opening after repairing, easing and adjusting including replacement of ball bearing, anchoring rod, gear box and crank handle, safty lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, sprially for hooping for columns, hooking ends binding with and including mild stell wire (annealed) not less than 0.9mm dia complete all as specifed and directed.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete and making good disturbed surfaces of walls, floors to match with existing specifications and keeping aside serviceable items for reuse within the same bldg and removing UNSV items from site, complete all as specified and directed.

M&L for point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

Description all as per srl item No. 68.00 here-in-before but for 5 pin 5 amp socket outlet point on independent board controlled by one switch 5 Amps one way, etc complete all as specified and directed.

Description all as per srl item No. 68.00 here-in-before but for 5 pin 5 amp socket outlet point on same board controlled by one switch 5 Amps one way, etc complete all as specified and directed.

Description all as per Srl item No. 68.00 here-in before but for one 3/5 pin 15Amps socket outlet on independent board using 4.00 Sqmm copper conductor wire including 4.00 Sqmm FRLS cable, PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfacees of wall , floor to match existing finishes etc complete all as specified and directed.

S&F Switch piano flush button, single pole, one way, 5 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Switch piano flush button, single pole, one way, 15 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F multi socket outlet, flush type 2&3 pin, 5 Amps, flush type 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F switch socket outlet 2 in 1, 3 pin, 5/6 Amps flush type, universal complete all as specified and directed.

S&F socket outlet, 15 Amps 230 volts complete all as specified and directed.

S&F ceiling rose, surface bakelite, 3 terminals, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings with polycarbonate body, including LED bulb 12 watt 230 Volts complete all as specified and directed.

S&F mini fan step regulator, step type suitable for 1200/1400mm sweep ceiling fan, hum free, 240 Volts and connecting electrically, complete all as specified and directed.

S&F in replacement of wall mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 20 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F in repalcement of LED building security light fitting 25 watts, IP 65, having pressure die cast aluminium alloy housing, prismatic polycarbonate cover, making connection with 3 core copper flexible cable of size 23/0.0076 including fixing of street light fitting galvanised iron bracket 0.90m long of suitable dia complete all as specified and directed.

S&F in replacement of bulk head 10 W LED light fitting 6000K, IP 43 in engineering plastic housing with clear primatic diffuser complete with all accessories, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

Note for srl item No 80 to 82 above 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 2 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 02 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.

S&F "in replacement" sheet metal enclosure MCB distribution board, double door, single pole & neutral with 200 Amps, 240volts 08 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F "in replacement" MCB SP, 240 Volts, 6 to 32 Amps with repturing capacity 10 KA 'B' series complete all as specified and directed.

S&F "in replacement" MCB SPN, 240 Volts, 40 to 63 Amps with repturing capacity 10 KA 'B' series complete all as specified and directed.

S&F as in repair hylum sheet of size 5"x5" including cutting to required shape for fixing of existing switches and sockets complete all as specified and directed.

S&F as in repair hylum sheet of size 8"x5" including cutting to required shape for fixing of existing switches and sockets complete all as specified and directed.

M&L for earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as required at site and directed.

Supply, fixing, installation and testing for externally illuminated wind direction indicator as per ICAO & FAA standard of make as approved by GE having frangible lattice tower frame of dimension 500x500±50mm, 4.50 meter height Fiberglass Latice tower of size 51mm and 32mm dia as per ICAO & FAA standard & as per drawing approved by Engineer-in-charge and GE, with the following items/accessories/parts as under:- (i) Stainless steel base with tilted hinge plate incl down to one side, set of 4 foundation bolts fixed on PCC work foundation of size 800x800x1000mm of grade M-25 as per drawing provided by manufacutre and approved by Engineer-in-charge & GE alongwith Stainless Steel mounting bolts incl earth work and connected work and accessories. (ii) 1 meter wind cone mounting H assembly, wind cone with 4 Nos of externally illuminated LED lights of cap upto 45 watt and 01 No of LED obstruction light of cap upto 20 watt, isolation box with connected wiring colour aviation Red & White complete all as specified by manufacturer's and directed.

RD Engineers

M/s Ashoka Brothers

M/S SAROOP ELECTRICAL & MECHANICAL WORKS

M/S KRISHAN SONS

M/S RUDHRAKSH TRADING CO

VIJAY KUMAR LAKHNI

M/S BISHAN DASS AND SONS

Substantial Const. Co.

M/S RAJESH SHARMA & CO.

Bidder Name

VIJAY KUMAR LAKHNI

Substantial Const. Co.

RD Engineers

M/S BISHAN DASS AND SONS

M/S RUDHRAKSH TRADING CO

M/s Ashoka Brothers

M/S SAROOP ELECTRICAL & MECHANICAL WORKS

M/S HIMANSHU BUILDERS

M/S KRISHAN SONS

M/S RAJESH SHARMA & CO.