Repair/ Maint for OR Mess and Dining Hall

Amount

SCHEDULE ‘A’ PART-I

Distempering with acrylic distemper having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete with removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc one coats on old surface complete work.

M/L for Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one coats on old work surffaces

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge

Providing and laying in Finishing walls with Acrylic Smooth exterior paint of required shade Old work one or more coat applied @ 0.90 ltr/ 10 sqm of required shade with removing dry old painted surfaces and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete work.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete

Structural Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet

Dismantling tile work in floors laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4, jointing with grey cement slurry @ 3.3kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete with 20 mm nominal size stone aggregate

AMAR RANJAN KUMAR