RETURN FILTER ELEMENT, Plasser Part No. HY-R501.330.10A/H/ES, Sub. HYR501.330.10ES Make: Plasser

Special Eligibility Criteria

1. 1

   OEMs or their Authorized Agent/dealers with valid authorization from OEM can also quote on behalf of OEM provided the OEM takes full responsibility for the quality of the material including warranty obligations and the inspection against Railways orders carried out at the manufacturers premises.

   Document requiredConfirmation required
2. 2

   As per public procurement policy ( preference to make in India) order no P- 45021/2/2017-PP (BE-II)2019 dated16/09/2020 of Ministry of Commerce, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quantity and therefore public procurement of the item is restricted to class I local suppliers only and the vendors who do not qualify to be class I local suppliers should not quoted in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a class I local suppliers for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any lost or damaged caused to the vendor.
3. 3

   (a) Tenderers are hereby instructed to supply the tendered quantity to the respective consignee(s) as indicated in tender document (b) If tenderer(s) mentioned anywhere in its offer contrary to (a) above and/or mentions not to supply to some of the consignees, such offer may not be considered for ordering for such consignee(s) where the tenderer has not agreed to directly deliver the stores without any back reference.

   Document optionalConfirmation required

Commercial-Compliance

1. 1

   Tenderers have to quote the FOR destination rate.

   Confirmation required
2. 2

   Make in India Policy: (a) This tender complies with public procurement policy (Make in India) order 2017 revised date 19/07/2024, issued by Department of Industrial, promotion and policy, Ministry of commerce circulated vide Railway Boards letter No. 2020/RS(G)/779/2/Pt.1 (E3322671), dated: 20/08/24. (b) Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported item and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated at Para-2.4 of Instructions to Tenderers for electronic invitated on IREPS attached. (c) In case of procurement for value in access of Rs. 10 Crs. the Class-I local supplier/Class-II local supplier shall be required to provide a certificate from the statutory auditor or cost auditor of the company (In case of companies) or from practicing cost accountant or practicing chartered accounts (In respect of suppliers other than companies) giving the percentage of local content.

   Document optionalConfirmation required
3. 3

   (A) MSE sources, who are interested for availing benefits under MSE act mentioned in the notification of Ministry of MSME, should upload valid document maintained under MSE act such as UDYAM Registration certificate duly marking the tendered item in the certificate otherwise claim for benefits under MSE act may not be entertained.

   Document optionalConfirmation required
4. 4

   (B) MSE source owned by SC/ST/Woman should upload necessary documents to get the benefits in regard to their category i.e. the ownership of MSE pertains to SC/ST/Other category clearly. Absence of this information in the registration certificate would be taken as MSE falling in the category of Others.

   Document optionalConfirmation required
5. 5

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   Inspection by Consignee.
2. 2

   Firm to mention HSN code of the tendered item and GSTIN No.

   Document optionalConfirmation required
3. 3

   (i) The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. (ii) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder. (iii) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from the incorporated in the purchase order; payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed. (iv) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order. (iv) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
4. 4

   i) Validity of the offer will be 90 days from the date of closing of the tender.

   Confirmation required
5. 5

   Mode of Dispatch: The Contractor shall have to supply the goods by Road transport only to Consignee SSE/TM/MLG, N.F. Railway, Pandu, Guwahati-781012.

   Confirmation required
6. 6

   Acceptance of tender:

   Confirmation required

7. ( a ) The purchaser reserves the right to reject any or all of the tenders in part or full at his sole discretion without assigning any reason. ( b ) Railway does not pledge itself to accept the lowest or any tenders and reserves to itself the right of acceptance of the whole or any part of the quantity offered. ( c ) The decision of Railways with regard to allotment of quantity so as to insure uninterrupted supply of Sleepers will be final. (d) The acceptance of the tender will be communicated by letter of acceptance direct to the tenderers. In case where a counter offer is issued, the unconditional acceptance of counter offer will result in a validity concluded contract through formal letter of acceptance may be forwarded to the contractor at a letter date.

8. 7

   FOR: Destination i.e.: SSE/TM/MLG, N.F. Railway, Pandu, Guwahati-781012

   Confirmation required
9. 8

   i) If any modification is required in P.O., it should be applied with in 7 days from the date of issue of P.O. to be eligible for D.P. re-fixation.

   Confirmation required
10. 9

    Force Measures clause (FMC): Applicable as per Indian Railway Standard(IRS) Conditions of Contract.

    Confirmation required
11. 10

    The tenderer should submit the following documents with the material: 1. warranty certificate of the material, 2. material test certificate from the OEM, 3. Declaration of purchase of the materials from the OEM by the supplier.

    Document optionalConfirmation required
12. 11

    The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-l. Non- submission of above certificate by the bidder shall result in summary rejection of his/ their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/ digitally signed by which they/ he is qualifying the Qualifying Criteria mentioned in the Tender Document. It will not be obligatory on the part of Tender Committee/ Accepting Authority to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned. The bidder shall be mandated to submit Annexure-I.

    Document requiredConfirmation required

1. 1

   S. No. Description 1 Validity of offer No deviation from the offer validity period stipulated in the tender is permitted.