RO Plan Boy Hr school_Nemilitp_Ranipet District

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. ( 50 Liters) M-0719

Conduction geophysical survey quality and quantity test an transportation charges etc., (Rate as adopted by TWAD board)

Drilling of borewells of size 6" to 8" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the Department Officers.

Supply and Delivery of 150 mm dia PVC casing pipe as IS 12818/1992 Including cost and conveyance to the site etc. complete

With slotter

Without slotter

labour Charges for inserting 150mm dia OD P.V.C Casing Pipes Assembley (With Slot or With Out Sloter In the Drilled holes Including the jointing the Pipe With P,V,C Coupler with Cement pipes complete

Supply and delivery of Single Phase submersible pump set suitable 150mm dia Borewell with ISI mark IS 8034/2002 Without pannel board of 15x80 etc complete

Supply and delivery of Single phase pannel boardwith Star Delta suitable for 1.50 HP submersible motor with DOL with two level guard and auto start etc. complete

Supply and delivery of following HDPE/GI pipes and specials confirming to IS 554/86 GI pipes IS 1239/1990 part I required

UPVC 50mm

50mm GI Bend

50mmGI Flange set

50mm GI Elbow

50mm MS clamp set

50mm GM Non return valve

2.50sqm 3 core flat copper submersible cable

Bore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made)

50mm GM gate valve

Labour charges for the erection of 1.00HP submersible pump set in the deep bore well including fixing and jointing submersible cable with Proper clamps upt to the starter to required depth and also fixing of riser pipes, valves erection, erection of Panel board consisting of TPICN switches and laying & jointing the cables and twin earthing asper IE rules, etc complete.

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 1000 lit

Please Enable Macros to View BoQ information