Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC | L1 | Accepted-AOC Awarded | |
| 2 | L2₹38.0 L+₹2.1 L (5.95%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹39.0 L+₹3.2 L (8.83%)Rejected-Finance WZ 409 0 B 1ST FLOOR PLOT NO 12 JANAK PARK HARI NAGAR NEW DELHI 110064 | NEW DELHI | WEST DELHI | DELHI | 110064 | L3 | Rejected-Finance Rejected |
Tender Value
₹39.3 L
EMD Value
₹78,656
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Subroto Park
GE (AF) Subroto Park Delhi Cantt Delhi-110010
as per BOQ
2022_MES_571151_1
GE/SP/TOKEN-71/2021-22
Open Tender
Pipes and Pipe related activities
Item Rate
180 days
GE (AF) Subroto Park Delhi
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
₹78,656
Yes
21 Apr 2023
24 Dec 2022
31 Jan 2023
24 Dec 2022
23 Jan 2023
9 Jan 2023
Amount
Excavation in trenches in any type soil /rock n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for necessary arrangement of all the materials / T&P / machinery. No extra cost shall be paid from department.
Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exc 25 cm each layers complete all as specified and as directed by Engineer-in-charge
Removal of excavated material & surplus soil to a distance n.exc 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge
Taking up / taking out from trenches cast iron water mains including all fittings of 250mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge
Taking up / taking out from trenches cast iron water mains including all fittings of 200mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge
Taking up / taking out from trenches cast iron water mains including all fittings of 150mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge
Taking up / taking out from trenches cast iron water mains including all fittings of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge
Cutting to cast iron pipes of 200mm to 250 mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge.
Cutting to cast iron pipes of 100mm to 150 mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge.
Supply and laying of unserviceable cast iron pipes size of 250mm bore including spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge
Supply and laying of unserviceable cast iron pipes size of 200mm bore including spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge
Supply and laying of unserviceable cast iron pipes size of 150mm bore including spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge
Supply and laying of unserviceable cast iron pipes size of 100mm bore including spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge
Supply and fixing and testing of CI fittings for spigot and socket pipes such as bends (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering suitable for pipes upto 200 to 250 mm bore complete all as specified and as directed by engr in charge. NOTE : Excavation earth work in any type of soil/Rock and jointing of pipes shall be measured and paid seperately.
All as per item No. 14 above but size of up to 200 mm complete all as specified and as directed by engr in charge.
All as per item No. 14 above but for flanged pipes size of 150 to 250 complete all as specified and as directed by engr in charge.
Supply and fixing in repair / replacement sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type ISI marked conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc suitable for 250 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair / replacement sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type ISI marked conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc suitable for 200 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair / replacement sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type ISI marked conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc suitable for 150mm bore pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair / replacement sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type ISI marked conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc suitable for 100mm bore pipe complete all as specified and as directed by Engineer-in-charge.
M & L for run lead joint suitable for spigot & socket CI pipe 150 to 250 mm dia complete all as specified and as directed by Engineer-in-charge
M & L for rubber gasket joints for CI flanged pipes suitable for bore of pipe 150 to 250 mm bore complete all as specified and as directed by Engineer-in-charge
M & L for run lead joint suitable for spigot & socket CI pipe 100 mm dia complete all as specified and as directed by Engineer-in-charge
M & L for rubber gasket joints for CI flanged pipes suitable for bore of pipe 100 mm bore complete all as specified and as directed by Engineer-in-charge
Taking out existing GI pipe 80mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge.
Ditto-All as per item No 25 here-in before but of size 50mm dia
Ditto-All as per item No 25 here-in before but of size 40mm dia
Ditto-All as per item No 25 here-in before but of size 20/25mm dia
Supplying, laying or fixing of 20mm dia GI water tubing, medium grade, of size as shown below confirming to IS-1239 [Part-1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in tenches / floors or fixed to walls / ceiling / roof etc including testing and taking up / down existing unserviceable GI tubing with fittings / connections, carefully from trenches / celiling /walls/roofs etc
Ditto-All as per item No 29 here-in before but of size 25mm dia
Ditto-All as per item No 29 here-in before but of size 40mm dia
Ditto-All as per item No 29 here-in before but of size 50mm dia
Ditto-All as per item No 29 here-in before but of size 80mm dia
Supply, lay and testing in replacement of ERW MS pipes size of 150mm dia ISI marked grade 3.5 mm thick as per IS:3589 grade 330 suitable for welded joints and flanged joints including fabricating tailor made sepials as per site requirement including painting with two coats of anti corrosive paint complete all as specified . After bailing out water from existing semi UG sump with Appx 7 Mtr depth at pump house complete all as specified and directed by Engr-in-charge.
Supply, lay and testing in replacement of ERW MS pipes size of 100mm dia ISI marked grade 3.5 mm thick as per IS:3589 grade 330 suitable for welded joints and flanged joints including fabricating tailor made sepials as per site requirement includng painting with two coats of anti corrosive paint complete all as specifiedAfter bailing out water from existing semi UG sump with Appx 7 Mtr depth at pump house complete all as specified and directed by Engr-in-charge.
Supply and fix NRV valve of 150 mm dia IS:5312 cast iron body, PN1.6,provision of 3mm thick rubber gasket on both sides of the flanges, bolts and nuts complete all as directed.
Supply and fix NRV valve of 100 mm dia IS:5312 cast iron body, PN1.6,provision of 3mm thick rubber gasket on both sides of the flanges, bolts and nuts complete all as directed.
M&L for cutting MS pipe inserting tee , specials such as bend(any radius and angle), tail piece, collars, tees of any type etc suitable for flanged/socketed & spigot ends pipe and welding brazing of size 100 to 150 mm dia complete all as specified and as directed by Engr-in-charge.
M&L for Brick work with sub-class 'B' bricks straight on plan built in CM 1:4 for pipe line supports complete all as specified and directed by Engineer-in-charge.
M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate built in CM for copping pipe liner support complete all as specified and as directed by Engineer-in-charge.
M&L for PCC as in foundation 1:2:4 type B-2 using 40mm graded stone aggregate built in cement mortar complete all as specified and as directed by Engineer-in-charge.
M&L for rendering 15mm thick on fair faces of brick work on concrete surfaces in 1:4 cement mortar for pillar supports complete all as specified and as directed by Engineer-in-charge.
Making good damaged surfaces of road to match the adjoining existing surfaces with using of paste premix bituminous 25mm thick polymer based material over WBM 75mm thick including rolling etc complete all as specified and as directed by Engineer-in-charge.
M&L for Construction of brick masonary valve pit of size 120cmx120cmx120cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3.15mm thick including frame of angle iron 40x40x6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in CM 1:6 15mm thick plastering in CM 1:4 (internal & external) and necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to a distance not exe 50 mtrs 150mm thick PCC 1:4:8 type D-2 for base and PCC copying 15mm thick 1:2:4 using 12mm graded aggregate complete all as specified and as directed by Engineer-in-charge.) for upto 150mm dia valve)
M&L for detecting and repairing leakage in CI/MS ERW pipe lines of size 100mm to 250mm bore, taking up unserviceable / serviceable CI/MS ERW water main with spigot and socket ends (including fittings) of any type/grade and joints from trenches and laying new CI/MS ERW pipe lines of size 100mm to 250 mm bore in trenches or placing on existing pillars /supports as directed to perform the following activities : (a) Excavation and earth work in soil/mud by using machinery/labour to suitable length (Appx 10 mtrs) and forming bund with excavated soil to avoid sea/row water entering into the working area including pumping/bailing out water by using portable deisel engine driven pump set.(b) Cutting of CI/MS ERW pipe of siz 100mm to 250mm00mm bore after thorough inspection for the damaged pipe line including disconnecting / dismantling.(c) Taking out CI/MS ERW pipe with CI/MS ERW specials after removing from joints/burning out joints and removing lead at both ends with the help of hydrolic crane other machinery and keeping aside for further disposal. (d) Cutting of new pipe into pieces as per requirement and laying using machinery. (e) Aligning the pipe line as per site condition, inserting the CI collar suitable for 100mm to 250 mm CI/MS ERW pipe.(f) Attending repair work within the minimum time frame/period as specified by Engr-in-Charge Notes (i) The unit rate is deemed to include cost of tools and plants and transportation required for attending the repair work. (ii) Supply only CI/MS ERW pipe shall be measured & paid seperately under relevant item of this schedule. (iii) Extra soil required for refilling/making bunds to prevent water entering into the work place shall be deemed to include in the unit rate. (iv) Specials/rubber or fiber /lead joints shall be measured and paid for seperately under relevant items of this schedule. (v) Old unsv CI/MS ERW pipes, fittings, lead, nuts bolts, washer, gaskets etc shall become contractors property and necessary recovery as per schedule of credit shall be deducted from contractor.
M&L for attending of water supply complaints for any leakage/blockage in GI pipe lines of size 20mm/25mm bore taking up serviceable/unserviceable GI water pipe lines all fittings/fixtures from trench including supply and laying GI tubing 20mm/25mm bore up to 1 mtr length (max) including necesssary cutting, threading and replacement of unserviceable GI fittings such as GI socket /Nipple/union socket / Tee /reducer etc. of size 20mm/25mm including necessary excavation and earth work up to 1 mtr length to repair the leakage / clearing the blockage in the pipe line and testing on completion on ground/wall/floor/roof of the bldg . (GI fittings shall be measured & paid seperately )
Ditto-All as per item No 46 here-in before but of size 40mm /50mm bore GI pipe line
Ditto- All as per item No 46 here-in before but of size 80mm /100mm bore GI pipe line
Cleaning of service tanks installed on roofs of multistoryed buildings at various places by emptying the tanks, removing scale, dirt and all other foreign materials deposited inside nipples, on side of walls and bottom of the tanks by scrapping and brushing with wire brush , and pressure pump, cleaning with bleaching powder slurry and allowed to dry and then washing the tank with fresh water, Checking and removing Airlock if any on next day after cleaning of the tank, cleaning of vegetation, etc, on surrounding RCC slab where the tank is resting and writing on the tank the date of cleaning, capacity of tank, etc, with synthetic enamel paint of 10 cm high and 6 cm width letters in white color, over a black background of size 450mm x 300mm complete all as specified and directed for the service tanks of capacity as shown below :- (a) Service Tanks of capacity exc 500 Ltrs and not exc 750 Ltrs
(b) Service Tanks of capacity exc 750 Ltrs and not exc 1000 Ltrs
(c) Service Tanks of capacity exc 1000 Ltrs and not exc 2000 Ltrs
(d) Service Tanks of capacity exc 2000 Ltrs and not exc 5000 Ltrs
S&F in replacement cable PVC insulated sheathed, unarmoured, flat submersible water proof with stranded copper conductor 1100 V grade of size 3 core 4 Sq mm.complete all as specified and directed by Engr-in-charge.
S&F in repair PVC copper stranded conductor cable size 1.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and directed by Engr-in-charge.
S&F in repair PVC copper stranded conductor cable size 2.5 Sqmm multi stranded single core 1100 volt grade
S&F in repair PVC copper stranded conductor cable size 4 Sqmm multi stranded single core 1100 volt grade
S&F in repair PVC copper stranded conductor cable size 6 Sqmm multi stranded single core 1100 volt grade
S&F in repair PVC copper stranded conductor cable size 10 Sqmm multi stranded single core 1100 volt grade
S&F in repair PVC copper stranded conductor cable size 16 Sqmm multi stranded single core 1100 volt grade
S&F in repair PVC flat sheathed submersible cable copper conductor of size 2.5 sqmm 3 core,1100 volt grade
S&F in repair PVC flat sheathed submersible cable copper conductor of size 4.0 sqmm 3 core,1100 volt grade
S&F in repair PVC flat sheathed submersible cable copper conductor of size 6.0 sqmm 3 core,1100 volt grade.
S&F in repair PVC flat sheathed submersible cable copper conductor of size 10.0 sqmm 3 core,1100 volt grade.
Supply & fix in replacement of MCCB 200 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
Supply & fix in replacement of MCCB 100 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
Supply & fix in replacement of MCCB160 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
Supply & fix in replacement of MCCB 63 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
Supply & fix in replacement of MCCB 400 amps 4 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of MCCB 250 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 50 to 110
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 40 to 45
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 25 to 32
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX upto 18.
Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 5000 LTRS complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 2000 LTRS complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 1000 LTRS complete all as specified and directed by Engr-in-charge.
Supply, Installing,testing and Commissioning in replacement of Ultrasonic Level Transmitter at Sump and overhead tank for measurement of water level installing at specific location with proper securing and finishing including necessary tools arrangement for fixing with following specification alla s pecified and directed by Engr-in-Charge:- Range : 0-8 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC Make: Nivelco / Siemens/Banner
Supply, Installing,Testing and Commissioning in replacement of Ultrasonic Level Transmitter at Sump and overhead tank for measurement of of water level installing at specific location with proper securing and finishing including necessary tools arrangement for fixing with following specification alla s pecified and directed by Engr-in-Charge:- Range : 0-3 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC Make: Nivelco / Siemens/Banner
Supply, Installation, testing and Commissioning in replacement of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type including necessary excavation, erth work, electrical and data cable connection upto required length and PCC all as specified and directed by Engr-in-Charge. (Butterfly valve shall be have following specification):-. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK
Supply, Installation, testing and Commissioning in replacement of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be indirect type using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 36 inches above ground level complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK
Supply, Installation, testing and Commissioning in replacement of 200 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type including necessary excavation, erth work, electrical and data cable connection upto required length and PCC all as specified and directed by Engr-in-Charge. (Butterfly valve shall be have following specification):-. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK
Supply & fix of monoblock pump single phase 1 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.
Supply & fix of monoblock pump single phase 1 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.
Supply and fixing in repair / replacement sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type ISI marked conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc suitable for 80mm bore pipe complete all as specified and as directed by Engineer-in-charge.
Dismantling & taking out defective part of centrifugal pump set coupled with 50 HP to 75 HP motor and refixed after making it complete serviceable by repairing/replacement complete all as specified and as directed by Engineer-in-charge.Note :- Parts to be replaced under this item shall be paid as supply only under respective items
Supply only shaft of existing material suitable for 50 to 75 HP motor
Supply only impeller of existing material suitable for 50 to 75 HP motor
Supply only shaft sleeve of existing material suitable for 50 to 75 HP
Drive end Bearing No 6313
Supply only Cast iron bearing housing for 50 to 75 HP motor
Supply only Gland assembly suitable for 50 to 75 HP motor
Supply only throat bush suitable for 50 to 75 HP motor
Supply only mechanical seal suitable for 50 to 75 HP motor
Supply only rotor body suitable for 50 to 75 HP complete all as specified and directed by Engineer-in-charge
Supply only shaft coupling suitable for 50 to 75 HP pump set
S&F cooling fan for 50 to 75 HP induction motor of any make and type. Make- As approved by Engineer-in-charge
Repairs to fire hose cabinet including replacement of unserviceable broken glass, aluminium tower bolts door steples locks wooden pieces hold fastners connect work and painting to fire hose cabinet and writing necessary information of Hydrant including cement work as required at site complete all as specified and as directed by Engineer-in-charge
S&F in replacement of fire hydrant valve single headed of size 63mm bore complete make Kartar/Sant
S&F in replacement of hose real drum 30m complete along with brass adopter for fixing in hydrant valve
S&F in replacement of RRL hose pipe 15m long complete
S&F in replacement of RRL hose pipe 30m long complete
M&L in replacement of Ladder for OHT/ UG sump with square bar,angle iron,channel, Flat Iron and etc welding, drilling, cutting with one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engineer in charge.
S&F in replacement of unserviceable of Disc filter (120 mesh) 30 m 3/Hr having one inlet & two outlets connections of 3", 2 pressure gauze ports of 3/4" , a helix made of fiber glass reinforce polyamide at base of disc filter cartridage to create a helical effect in the incomming water , spinning particulate in suspension away fromk the filtering element and so minimizing clearings frequency, 3/4" outlent for flusing at botom of filter & maximum working pressure of 14 bars.Make : Harit( India) , Arkal (Israel), Amaid ( Isreal)
M & L Design, development, supply commissioning & testing EHCC certified ground tubular effective Tripot type chemical earthing system ( CPRI tested for 15 KA current capacity for LT line) highly anticorrosive long life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 25mm x 3mtr long copper rod as primary conductor and hollow pure Copper tube of dia 50mm x 3mtrs long as secondary conductor to install with suitable connection terminal coforming of IS 3043: 1987 specification, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation 02 Bags / 60 Kgs minimum or sufficient quantities required as per site complete including FRP earthing pit clause suitable cover, material and labour including 32x6mm earthing strip 10mtr length and testing after completipon and result should be less than one Ohm complete, all as specified and as directed by Engineer-in Charge. Note:- Excavation for earthing in any surface hard/rock/soft soil for required length by using rock driller machine/other eqpt is inclusive in quoted rate and necessary earthing pit 60x60x6cm also inclusive in quoted rate.
M&L for earth continuity conductor of size 32x6 mm galvanised strip strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge
M&L in replacement of unserviceable / burnt mono block pump (pressure booster) set of capacity 0.5 HP to 0.75 HP complete including necessary cutting of GI pipe inserting tee and connection all as specified and as directed by Engineer-in-cjharge. Make-kirloskar Model Mini series 28S
M&L in replacement of unserviceable / burnt mono block pump (pressure booster) set of capacity 1.0 HP complete including necessary cutting of GI pipe inserting tee and connection all as specified and as directed by Engineer-in-cjharge. Make-kirloskar Model Mini series 50S
Supply, Installation Testing & Commissioning in replacement of Indoor type PLC ( Programmable Logic Controller) based Automation, Protection Panel with wirelesss Radio Frequency based communication suitable for control and monitoring of Pump and Valve ,Centrifugal pumps - 02 Nos, motorized butterfly valves - 2 Nos , ultrasonic sensor - 2 Nos, solenoid priming valves & solenoid air release valves- 04 Nos each, pressure transimitter - 02 Nos The front facia of the panel shall be made out of ink jet printed laminated latex on vinyl to clearly depict the layout of the PH in schematic format.The panel should be of minimum size 1200(H) X 1000(W) X 300(D) mm fabricated from 2 mm CRCA Sheet duly powder coated. The Panel should comprise the following items:- (a) Water Level Sensing & Display (b) Automatic Pump On/Off (c) Automatic Operation of Motor Actuated Butterfly Valves (d) Automatic Toggling of Pumps (e) Auto Change Over In Case of Pump Failure (f) Single Phasing Prevention (g) Manual Mode Operation (all connected sub systems including all valves in pump houses and connected buildings / overhead tanks and pumps) from the PLC based Control Panel. (ii) 01 No. PLC with follwing specifications:- (MAKE:- SCHNEIDER/SIEMENS/ABB/GE Automation/PHOENIX CONTACT) (a). 1 Nos. non isolated RS 485 communication port, 1 Nos. Ethernet communication port.(b). Suitable No. of digital / analog input and outputs.(c). Programming Software based on IEC to facilitate building of custom build function blocks.(d). Supported reduced single phase HSC channels, should support Server / Client with Industrial Grade Processor.(e). Protocol : Master/Slave Modbus, Expandable upto 248 I/O’s and 7 expansion module.
Supply, Installation, testing and Commissioning in replacement of 250 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be indirect type using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 36 inches above ground level complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK
D P ENTERPRISES
Flint India
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .