REPAIRS TO PLINTH PROTECTION DRAIN PATH CULVERT AND HARD STANDING FENCING RCC JALI AND MISC WORKS IN OFFRS MD ACCN ADM BLDG ADM OFFICES MESSES VIP BLDGS AND (9036/E8)

Amount

Note:- All items in BOQ are for"Materials and labour (M&L) /Supply and fix (S&F)" and to be executed in "Repairs" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level), complete all as specified & as directed.

M&L for 40mm thick plain cement concrete 1:2:4 type B1, (using 20mm graded crushed stone aggregate) as in floor including finishing cement concrete surface even and smooth without using extra cement, complete all as specified & as directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in flooring,path , foundation etc, complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, without using extra cement, complete all as specified and directed.

M & L for chequred cement concrete tile 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M & L for coloured chequred tile 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M & L for coloured chequered factory made of tile 30 cm x 30 cm 8-10 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

S&F machine pressed precast concrete (interlocking paves) block of any shape and size confirming to IS-15658-2006 of 60mm thick over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand, complete all as specified and as directed.

S&F machine pressed precast concrete blocks (interlocking paves) rubberised with 6mm top layers of ante abrasive material laid over and incl 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . confirming to IS-15658-2006 of 60mm thickness, M-35 grade, complete all as specified and as directed.

S&F machine pressed precast concrete curb stone blocks using Cement concrete 1:3:6 type C1 (20mm graded crushed stone aggregate) all as directed by Engr-in-Charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & as directed.

M&L for PCC solid building blocks 10 Cm thick 1:2:4 type B1 (using 20mm graded crushed stone aggregate) set in cement mortar (1:6), all as specified and as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.

All as per Item No 14 above but except stone complate all as specified and directed.

M & L for Precast cement conerete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid block exc 10 CM width and setting in cement cortar 1:6 complete all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surface (externally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed.

M & L for three coats of white wash on newly plastered surface of wall including preparation of serfaces, complete all as specified and as directed..

M&L for two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and as directed.

M & L for one coat of white wash on old surface of wall including prepration of surface, complete all as specified and directed..

M&L for one coat of colour wash on old surfaces including preparation complete all as specified & as directed.

M & L two coat of cement base paint over a coat of white chalk on wall over a plaster/unplastered surfaces including preparation of surface complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and as directed.

M & L for applying one coat of synthetic enamel paint on old steel serface of any description over 10 cm width or girth including preparation of surfaces complete all as specified and as directed.

Demiolition of reinforced cement concrete of as cover slab, staircase, landing, chajjas, RCC Jali , post and similar suspended work of any description and any position not otherwise, complete all as specified and as directed.

Providing precast RCC using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6, complete all as specified and as drected.

M&L for TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also & all as specified.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore complete all as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore complete all as directed

S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed

S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed

S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed

S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed

S&F in repair 100mm CI bends any radius, complete all as specified and as directed

S&F in repair 75 mm dia CI bend with oval acess door fixed to pipe, complete all as specified and as directed.

S&F in repair 75 mm dia CI floor trap plain grating including jointing with solvent cement complete all as specified and as directed.

S & F in repair Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggreate) complete all as specified and as directed.

S&F in repair of PVC SWR gully trap 125/110 mm size including setting and jointing with solvent all as specified and as directed.

S&F 110 mm PVC SWR pipes single socketd in any length with rubber rings joints laid fixed in wall, complete all as specified and as directed.

S&F 75 mm PVC SWR pipes single socketed in any length with rubber rings joints fixed to wall, complete all as specified and directed.

S&F110 mm PVC (SWR) bends any radius complete all as specified and directed

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed

Dismantling of RCC fencing post or struts of any description/section including taking out embeded ,barbed wire in concrete and making good disturbed all as directed

Dismantling of old Chain link fencing complete all as directed

Excavation in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surfaces in any type of soli, complete all as specified and as directed.

S & F for angle iron frame work for fencing post, chajja conforming to fe 410-O or 310-O complete all as specified and directed.

S&F MS flat iron tie with angle iron post for chain link fencing complete all as specified and directed.

M&L for round bars 10mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups alsoFE 410-w(Gde, E-250 quality A or Fe 290(Gde-E-165) complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete.

Supply only chain link MS galvanised fencing of size mesh 50mm x 50mm, complete all as specified and as directed.

Fixing only chain link MS galvaniced fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc including peovission of binding wire complete all as specified and as directed.

Dismantling of old barbed wire complete all as directed

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) IWA type complete all as specified and as directed.

M&L for mild steel bolts machine made 10mm dia of neck hexagonal or square head at one end and screwed the other or screwd both ends each screwed end to be fitted with washers and one hexagonal or square exceeding 3 cm but not exceeding 5cm long complete all as specified and as directed.

M & L for providing precast concrete 1:2 :4 type B-1 (using 20 mm graded crushed stone aggregate) (Fencing post) finished even and smooth, complete all as specified and as directed.

Taking down bush/plant in roof side, wall and any position in the existing bldg portion removing the all root on wall complete with the satisfication of Engr in charge and after removing the root the whole area of spray the acid in the and making good distrubed area with PCC/Plastering etc complete all as specified and as directed. ( Note : Brush / plant which is extra bldg other than the roof treatment bldg )

Dismantling structural steel work including doors, gates etc complete all as specified and as directed.

S & F framed work as in door or gates ornamental type of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to br prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering runing rails and guides) including forging item (tersule etc) and hanging also fastening and fixing complete all as specified and as directed.Conforming to Fe 290.Gde E165.

S & F framed work such as grills, grating, gate door etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar complete.

Supply and fixing for mild steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to relvent IS and applying one coat of zinc chromate primer, complete all as specified and as directed.

S&F mild steel flat iron work as in wind tie including securing with nut and bolts, complete all as specified and as directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.

M & L for providing 35 mm thick pre-cast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4 complete all as specified and as directed.

M & L for providing precast concrete 1:2 :4 type B-1 (using 20 mm graded crushed stone aggregate) as in RCC jali post setting in mortar 1:6 complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, wall, aprons etc laid dry or laid dry and pointed complete all as specified and as directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 10mmthick rendering in CM 1:4, complete all as specified and as directed.

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4 complete all as specified and as directed.

M&L for 20-25mm thick Jodhpur stone tiles as in wall cladding fixed conplete over and incl 10mm thich cement plaster in CM 1:4 complete all as directed

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete.Note:- Opening of existing wind tie where required for taking down of AC sheet is included in the rate quoted against this item.

S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with 'J' type bolts, complete all as specified and as directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S & F 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in any type of soil complete all as specified and as directed.

All as per item No. 78 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out Soft/disintegrated soil.

S&F PVC SWR (heavy duty) pipes single socketd in any length with rubber rings joints laid in trenches or in floors 150mm complete all as specified and as directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150mm bore of pipe complete all as directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe complete all as directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in surface channel or benching including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately). complete all as specified and as directed.

Supply and laying of RCC drain pipe 150 mm dia class NP-2 laid and jointed complete with collars complete all as specified and as directed.

Supply and laying of RCC drain pipe 200 mm dia class NP-2 laid and jointed complete with collars complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 C1 (using 20 mm graded crushed stone aggregate) as in foundations filling /plinth protection and mass concrete complete all as specified and as directed.

Returning , filling in soil (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick all as directed.

Removing surplus excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point complete all as directed.

Supply and Fix cast iron foot steps, n. exc 5 each in manholes.

Cutting in to existing manhole for connecting new drains and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as asked. (a ) 150 mm dia

(b) 200 mm dia

Dismantling of cast iron of CI drain pipe/PVC drain pipe jointed in cement mortor of size 110/100mm bore complete all as directed

All as per Item No 93 above but 75 mm dia complete all as specified and as directed.

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm complete all as specified and as directed.

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm complete all as specified and as directed.

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.

S&F 75 mm PVC SWR junction (T) with acces door equal or unequal complete all as specified.

S&F 110mm PVC SWR junction (T) with acces door equal or unequal complete all as specified.

S&F 100mm dia CI connector of length 30 cms including cutting of holes with lead joints

S&F CI single branch piece 100mm dia, complete all as specified and as directed.

S&F CI double branch piece 100mm dia, complete all as specified and as directed.

S&F CI single branch piece 75mm dia, complete all as specified and as directed.

S&F CI double branch piece 75 mm dia complete all as specified and as directed.

M &L for cutting to Bituminious road for laying of RCC hume pipe & making good as per road specification as per direction of Engr-in-Charge.

Cutting and grubbing of bushes grass and tree surrounding sewage line and levelling of ground around the sewage line, finish the surface and removing the waste material to distance exc. 50m and n exc. 250m and clearing the site.

Cutting of berms as per existing and making good all as directed by Engr-in-Charge.

Cleaning of manholes complete of anysize and at any location incl taking out sludge and other material deposited in manhole and its disposal to a distance n exc. 50 M all as directed by Engr-in-Charge for depth of manholes as given below:- (a) Depth of manhole n exc 1.00 M

( b) Depth of manhole exc 1.00 M and n exc 2.00 M

( c) Depth of manhole exc 2.00 M and above

Temporarily blocking of inlet of septic tanks with suitable wooden pugs/gunny bags and pumping out/bailing out effluent (liquid/semi liquid) from the septic tanks with diesel engine driven gen sets into closed containers or through PVC Hose pipes & delivering the same outside def land complete and taking out the blocking arangements of inlet and making the system functional all as specified and directed.

Cleaning of septic tanks of any capacity & any size by taking out sludge (work in foul condition) & removing the sludge to outside defence land in closed vehicle all as directed by Engr-in-Charge.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc, complete all as specified and directed.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover.

Pumping out water inflow caused by spring or tidal or river seepage, broken water mains or drains and the like with pumping set of 5 HP to 9 HP including POL/power consumption & operator maint etc. All as directed. Note : This item shall be operated only when specifically ordered by Engr-in-charge.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type including cement mortar bedding ( but not backing ) complete all as specified.

Material and Labour non skid coloured ceramic tiles (1st quality) 300 x 300 x 6 mm in floors set and jonted in neat cement slurry and pointed in coloured / white cement to match in and including 15mm thick cement mortar screed in CM 1:6, complete all as specified. Make : Kajaria/Orientbell/Somany.

M&L for precast RCC 1:2:4 Type B 1 (using 20mm graded stone aggregate) as in manhole cover/ drain cover slab with hole/without hole hoisted & laying in position as directed.

Mild steel TMT bars 10mm dia and over cut to length, bent to shape reqd, cutting bending and binding with mild steel wire not less than 0.90mm dia, complete all as specified and as directed.

Supply only water proofing compound

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover.

S & F in repair Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste pipe,CP coupling,pillar taps, MS brackets, complete all as specified and directed.

M&L for cleaning of all blockage of WC, bath, kitchen, WHB, traps, soil waste/vednt pipe (vertical or laid in trenches/floor any type/size) sewage line upto 1st man hole of any section/depth any situations by way of cleaning/desludging man holes by using any type of manually or mechanically or by way of any other suitable means including foreign material from manholes, traps, pits where required and dircted by Engineer-in-Charge and keeping the sewage system upto 1st man hoale functional in prefect condition including final drop out form up to 1st man hole. (working in foul condition with taking precautionary measures equipment shall be provided as required are applicable) all as specified and directed Note:- (i) Work foul Condition/Cleaning of sludge in manholes shall be carried out Mechanicaly. (ii) The contractor shall provide 5 nos safaiwala per day to concerned sub division at 8:30AM to 17:00 PM daily even on sunday and holidays to attend emergency complaints alongwith requisite T &P required for JOB. No extra payment shall be admissible for working on sunday/holiday. However, one day weekly off shall be given to each worker and suitable releiver arragement shall be made by the contractor. However, no extra payment shall be admissible on this account. (iii) Safaiwala provided under this items shall exclusively be deputed on the work for cleaning of blockage as described in the item. The person to be deployed for this items shall not be deputed for other work. (iv) All complaints given to workers shall be rectified/removed within 24hrs failing which a panel recovery for Rs 150/- per complaints for each complaints shall be imposed on the contractor and recovery shall be effected from the contractors dues (v) incase any particular safaiwala found absent, or less deployed from the requisite number, a panel recovery for ruppees 500/- per day shall be recovered from the contractor dues.

Note:- The contract amount shall be arrived at after deducting amount of Schedule of Credit from the Total quoted amount.

mahalaxmi enterprises