REPAIRS TO FENCING WORK, GATES, SECURITY WALL AND PROTECTIVE WORK AT DHAR ROAD UDHAMPUR

Amount

Demolition of reinforcement cement concrete of any description from any position complete all as specified and as directed.

Demolition of plain cment concrete of any description from any position including PCC floor tiles etc. complete all as specified and as directed.

Dismantling of RCC posts and struts (wood,Steel, RCC) of any section including taking out embedded portion and making good disturbed ground including barbed wire fencing complete all as directed by Engr-in-Charge.

Dismantling of fencing wire mesh any type and of any description and in any position all as specified and as directed.

Excavation in post hole each n exc 0.5cum getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified..

M&L Plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) in foundation of pillars and posts all as specified.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, incl securing or tying at crossing with and provn of Galvanised mild steel wire, staples or steel pins, complete all as specified.

M&L for restraining and resecuring of fencing wire of any description incl making good staples, etc complete all as specified.

Supply only MS Galvanised chain link fencing including line wires, any mesh, size 75 x 75 mm and type to any type of standards, rails straining bolts, etc including provision of binding wire.

All as per item No 09 above but fixing only

S&F in repair Concertina coil with punched tape of 600mm dia centre core wire shall be minimum 2.5mm dia of mild steel wire confirming to IS 280-2006. Galvanised coating of steel concertina coil shall confirm to the requirements as laid down for medium coated wire in IS 4826 "Hot dipped galvanised coating of round steel wires" concertina coil shall be fixed in dimond shape with the help of dovetail to handle and spikes shall be fixed at both end of coil, minimum staight length of the wire 150RM of 10RM of work, minimum weight 13.5 Kg for 10RM of work i.e 90 gm/RM of wire complete all as specified and directed.

Demolition of RR masonry/brick work built in cement mortar incl boulder Pitching complete all as directed by Engr-in-Charge.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) Complete all as specified and directed.

All as per item No 13 above but except bricks.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

M&L for walling of Random Rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.

All as item No 16 above but except stone

Taking down cement plaster on brick work or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on brick/stone masonry surface finished even and fair without using extra cement complete all as specified.

M&L flush pointing to random rubble masonry, uncoursed or brought upto courses in CM 1:3 complete all as specified.

M&L for mild steel work as in posts and struts in fencing including cutting fixing tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting and similar work conforming to Fe 410-0 of Fe 310-0 all as specified.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410- W(Gde-E-250) quality- B complete all as specified and directed

M&L preparation of old painted steel surfaces exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of new steel surfaces exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in copping all as specified.

M&L for providing precast cement concrete louvres and jallies, 1:2:4 type B-0 (Using 12.5mm graded stone aggt), 35mm thick, set in cement mortar 1:4, (measured solid), including all mouldings complete all as specified.

M&L for providing RCC type B1, 1:2:4 (using 20mm grded stone aggregate) as in lintel beam on pre cast RCC Jalli and the like complete all as specified.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., surfaces finished fair complete all as specified.

Preparing new plastered surfaces of walls, RCC jalies etc and applying two coats of cement base paint, complete all as specified

M&L for two coats of exterior emulsion paint (Weather Coat) on in Columns, chajjas, fins, facia etc on old or new plastered surfaces including preperation of surfaces complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L for dismantling of floor hearth or wall tiling including Cement Mortor bedding (but not backing) removing serviceable tiles and rubbish of premises all as specified and as directed.

M&L for glazed ceramic tiles in vertical surfaces like pillar of gates not less than 7mm thick set and jointed in neat cement slurry over and including 10mm thick plastering in CM 1:3 and pointed in white or coloured cement to match, size and colour / shade as directed by Engr-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape as reqd, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS (annealed) wire not less than 0.9mm dia or securing with clips all as specified.

All as per item No 34 above but 6 to 8mm dia bars.

M&L for providing RCC (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in coloumn, pillar, piers, posts and struts complete all as specified and as directed

M&l for form work to side of pillar posts and struts for rough finished surfaces of concrete all as specified and as directed.

Taking down top assembly complete (except curtain and guide channel of rolling shutter push or pull or manual type and refixing the same in same position after necessary repair such as cleaning, replacement of rusted nuts and bolts including welding/grinding as required for proper and smooth function, area of each shutter exc 5 Sqm but n.exc 10 Sqm each complete all as specified and as directed.

All as per item No 38 above but gear operated type area of each shutter exc 10 Sqm but not exc 20 Sqm complete all as specified and as directed

Taking down existing unserviceable rolling shutter complete of any size and any type complete all as specified and directed.

S&F Steel rolling shutters with ball bearing gear operated type with bevel gear box and crank handle with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple and one shop coat of primer and erected in position complete all as specified and directed.

S&F in repairs steel ball bearing suitable for rolling shutters for smooth functioning of rolling shutter complete all as specified and directed.

S&F in repairs GI Pipe 40mm "medium grade" as in suspension shaft for rolling shutter for smooth functioning, cut to size including necessary drilling etc complete all as specified and directed.

S&F in repairs GI Pipe 50mm "medium grade" as in suspension shaft for rolling shutter for smooth functioning, cut to size including necessary drilling etc complete all as specified and directed.

S&F in repairs steel spring suitable for mannually operated rolling shutters for smooth functioning complete all as specified and directed.

All as per Srl item No 45 above but for gear operated complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed

M&L for applying one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

S&F in repairs hood for rolling shutters fabricated with 1 mm thick mild steel sheet, hexagonal, square or circular shape, including angle/bottom edge, fixed over bracket plate with necessary fixture & fastners and including one shop coat of primer,complete all as specified and directed.

M&L for rough cast wired glass 6.4 mm thick and glazing with oil putty in square n.exc. 0.50Sqm each pane complete all as specified and directed.

M&L for rough cast wired glass 6.4 mm thick and glazing with oil putty in square exc. 0.50 Sqm but n.exc.0.75 Sqm each panecomplete all as specified and directed.

M&L for rough cast wired glass 6.4 mm thick and glazing with oil putty in square exc 0.75 Sqm but n.exc. 1.00 Sqm each panecomplete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F in repairs curtains of Rolling shutter built up of 1.25mm thick MS Sheet inter locking lath sections, the lath sections shall have a distance of 75mm between rolling centres complete all as specified and directed.

S&F in repairs mild steel guide channels 75mm wide and 3.15mm thick MS sheet suitable for rolling shutters complete all as specified and directed.

S&F in repairs 3.15mm thick lock plate complete with pulling handle complete all as specified and directed.

S&F in repairs MS gear box suitable for rolling shutter complete all as specified and directed.

S&F in repairs gear box assembly assembled at top of rolling shutter complete all as specified and directed.

S&F in repairs MS brackets suitable for rolling shutter with bush etc complete all as specified and directed.

Welding in repair exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed.

MAHADEV ENTERPRISES

DAVINDER SINGH

NARESH KUMAR KHAJURIA

KUMAR CONSTRUCTION CO

SHIVAE CONSTRUCTION