SPL REPAIR TO INTERNAL ROAD AT AATS INCL RE-SURFACING OF EXISTING ROAD AT OFFR MESS OF 60 PARA FD HOSPITAL UNDER GE (EAST) AGRA

Amount

M&L for repairs to pot holes of any depth, n. exc. 1 sqm each including sweeping free from dust and mud or water, scoring sunken portion of roads path etc by cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (incl supply of road metal) complete all as specified and directed at site.

M&L for preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed

M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm over the prepared surfaces by mechanical sprayer complete all as specified and directed.

M&L for laying bituminous premix Asphaltic semi dense asphaltic concrete with using mechanical paver 30 mm thick consolidated thickness with using 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' / BOQ

M&L for preparation of road surface and applying hot thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a arrow dashes, letters etc,on road or pavement with using retro reflective thermoplastic road marking paint of approved make applied with machine all as per manufacturer's instructions & colour as directed by GE complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for moorum / red bajri filling in floors / road berms laid in layers n. exc. 15 cm thick spread leveled and well ramming including watering complete all as specified and directed.

M&L for 60 mm thick rubberised interlocking paver blocks confirming to IS 15658-2006 of cement concrete M-35 designation (compressive strength) of mixed colour, factory made, laid over sand and jointed with coloured cement slurry and pigment and sides of paver blocks grouted with and including PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) to make straight line complete all as specified and directed. Note :- Sand cushioning shall be measured and paid separately.

M&L for sand filling under floors including spreading watering and consolidation complete all as specified and directed.

M&L 50 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in sub base / path / sub floor / and paving complete all as specified and directed.

Supply and fixing metal tubular delinator made out of ABS round body fitted with 2 Nos 100 mm dia and 1200 mm length, highly reflective reflectors made out PMMA and mounted on 100 mm dia mild steel pipe of 1200 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

Supply and fixing cate eye solar reflector type of metal body alloy of size 100 mm x 100 mm x 20 m with PMMA stripless reflector of model No. 290 of 3M with load bearing capacity 20 tonne fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

M&L for providing precast concrete kerb stone as in edging or similar in PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) edges finished even and smooth cross section area not less than embedding kerb stone and removing surplus earth out side premises complete all as specified and directed.

M&L for two coats of Acrylic weather proof paint on new surface of brick / stone / wall including preparation of surfaces complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2;4 type B-2 (using 40 mm graded stone aggregate) as in path / floor complete surface finished even and smooth without using extra cement complete all as specified and directed.

Rahul Construction Co

C P Singh and Co

Attar Singh and Sons

Gupta Automobiles