Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.6 LAccepted-AOC HDLX 31 JASUJA CITY JABALPUR MP 482003 | JABALPUR | MADHYA PRADESH | 482003 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹42.8 L+₹80,936.74 (1.93%)Rejected-Finance HOUSE NO E 1 PANCHSHEEL NAGAR NARMADA ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹42.9 L+₹94,559.65 (2.25%)Rejected-Finance PLOT NO 12 SAKAR GRAH NIRMAN SOCIETY TILHARI MANDLA ROAD JABALPUR MP 482001 | JABALPUR | JABALPUR | MP | 482001 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹43.2 L+₹1.2 L (2.94%)Rejected-Finance 114 BARH CHONDI BARH PATNA BIHAR 803213 | PATNA | PATNA | BIHAR | 803213 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹43.3 L+₹1.3 L (3.21%)Rejected-Finance 44 EKTA NAGAR MP 4 ROAD JABALPUR MP 482002 | JABALPUR | MADHYA PRADESH | 482002 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
11 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JABALPUR
HQ CWE JABALPUR OPPOSITE SUPPLY DEPOT SADAR 482001
SPL REPAIR TO JCOS MD ACCN BLDG NO. P-168/1 TO P-168/6 (CONSISTING OF 06 X QTRS) AT HOSHIAR SINGH ENCLAVE OF THE GRENADE RC JABALPUR AND CONSTRUCTION OF SECURITY WALL AND PROVISION OF TWO GATES AT PI STAFF MESS UNDER GE (WEST) JABALPUR
2023_MES_583100_1
81986/E8
Open Tender
Civil Works
Item Rate
180 days
JABALPUR
AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
GE WEST JABALPUR
₹96,000
Yes
23 Mar 2023
27 Feb 2023
13 Mar 2023
27 Feb 2023
11 Mar 2023
6 Mar 2023
27 Feb 2023 - 4 Mar 2023
Amount
Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) as in floors finished even & smooth without using extra cement in patches complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L vitrified ceramic tiles 10 mm thick, in light shade, (Square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of coloured tiles, laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.
All as per above item No.4 but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed.
M & L Non Skid ceramic joint free tiles 7 to 8 mm thick coloured tiles (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.
M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles, over and including 10 mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified & directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed
M & L for Rendering 15 mm thick external plaster, on fair faces of brick work or concrete surfaces in cement mortar 1:4 and including mixing of water proofing compound complete all as specified & directed. (Note :- Liquid Water proofing compound shall be measured & paid for seperately as " Supply only".)
Supply only liquid Water proofing compound, ISI marked complete all as speicified and as directed.
M & L for 15 mm thick rendering internal plaster, on fair faces of brick work or concrete surfaces in CM (1:6), finished even and smooth without using etra cement complete all as specified & directed.
M & L for rendering 15mm thick in CM 1:3 on fair faces of bricks or concrete surfaces in patch work in any location with and including water proofing compound such as Dr. Fixit Pidicrete URP or equivalent, mixed with cement mortar @ 15% by wt of cement over a coat of primer mixed in proportion 1:1 (water proofing admixiture:Cement) finished surface even & smooth comp[lete all as specified & directed. ( Note : cost of water proofing is deemed to be included in theunit rate quoted against this item)
M&L for preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified & directed.
M & L for rendering 5 mm thick in C:M 1:3 on ceiling, in patches, and finished even and smooth complete all as specified and directed
M & L applying two coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified & directed.
Dismantling brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed.
M&L Brick work with sub class 'B' fly ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.
M & L preparation of Old steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.
M & L preparation of Old wooden surfaces of any description over 10 cm width or girth & applying two coat of synthetic enamel paint complete all as specified and as directed.
Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed.
Taking down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe all as specified and directed.
Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified & directed.
Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified & directed.
S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed.
S & F in repair Brass chromium plated bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable for 15mm bore of pipe of approved quality, screwed down, for iron pipe and fixed complete all as specified & directed.
M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting not exceeding 10 cm in girth complete all as specified and as directed.
Taking down of eaves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified & directed.
S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified & directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
Ditto all as item 30 but 75 mm bore.
S & F PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.
M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all specified and as directed.
S & F PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe with access door complete all as specified and directed.
S & F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.
S & F PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed.
S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.
Taking down chowkhat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and as directed.
Taking down Shutter exc. 1 sqm and not exc. 2 sqm each complete all as specified and as directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed .
Supply and Fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.
M&L for pressed steel door frame size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed
M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc. complete all as specified and directed.
S & F factory made 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed. ( Note : Glazing shall be measured and paid for separately)
S & F factory made 35 mm thick plain, framed, panelled shutters 2nd class hardwood (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) complete all as specified and directed.
S&F in repair 18mm rigid prelaminated coloured solid PVC sheet suitably fixed in MS angle frame work as in cup board , cabinate ,Drawer etc as per manufacturer specification complete all as specified and directed. (Note :- Mild steel frame work shall be measured and paid for separately.)
M & L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S & F factory made single piece extruded solid PVC door prelam frame (single rebate ) made out of single piece extruded (SPE) solid PVC foam profile with smooth outer integral skin having of size 90mmX 47mm PVC profile throughout reinforcement with MS tube with PVC Sheet complete all as per Manufacturer specification and as directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings all as directed.
S&F 100 mm long aluminium alloy, Type C-22 butt hinges with galvanised MS hinge pin etc. Complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed.
S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed.
S&F 100mm long aluminium anodised handle cast type and fixed complete all as specified and directed.
S&F alluminum alloy, anodised, sliding door bolt with hasp & staple (bolt type) and length of 250 mm long etc. Complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete all as specified and directed..
S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars and similar work, conforming to Fe- 290-0 Gde-E-165 complete all as specified and directed.
Providing and fixing of double rebate openable/fixed windows,top hung Ventilator/Louver Ventilator, made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete all as specified and as directed.
Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane (upto three storey of bldgs) complete all as specified and as directed.
S&F 4mm thick sheet glass ordinary quality and galzing with necessary rubber beading of any size complete as in aluminium windows/ventilators complete all as specified and as directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed.
S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed.
M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces compelte all as specified and directed.
M&L two coat of synthetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces complete all as specified and directed.
M&L for 40 mm bore Low Density Polyethylene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.
S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed .
S & F, in repair, Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete all as specified and directed.
S & F, in repair, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed, 15 mm, complete all as specified and directed.
S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , 20 mm, complete all as specified and directed.
S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete all as specified and directed.
S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed.
S & F, in repair, Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.
S & F for Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
M&L for pre stressed steel door frame 105 x60mm, 1.25mm thick including necessary fixing lugs, hinges, Lock strike plate etc completed all a specified & directed
S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and directed.
S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified & directed.
S & F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repairs including filling of PCC 1:5:10 type E2 using 40mm graded crushed stone aggregate complete all as specified and directed.
S & F Vitreous china WHB 550x400mm on existing brackets , fixing flat back or angle back type with PVC (HDPE) 32 mm dia waste pipe, brass coupling 32 mm CP etc, fixed in repair complete all as specified and directed.
M&L Granite (of any type ) slab/tiles as cooking platform/shelf, 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete all as specified and directed.
S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed .
S & F Door Seal rubber of size 25mm, complete all as specified & directed.
S & F PVC cabinate with mirror etc, complete all as specified. Make : Prayag : (Size : 400 x 500 ) cat No.554 or equivalent in Polytuff, Sintex. complete all as specified and as directed.
Complete removal of existing treatment on walls including steel wire brushing and scrapping etc and applying 2mm thick( Avg) Birla wall care putty in two layers on wall surfaces including rubbing, levelling and preparing the surfaces for receiving further finishes complete as specified and as directed.
M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.
M&L for applying two coat of distemper Oil emulsion white or tinted on new putty surfaces of wall complete all as specified and directed.
M&L for preparation of old surfaces of wall and applying two coat of distemper Oil emulsion, white or tinted, complete all as specified and directed.
M & L preparation of old plastered surfaces of walls & applying two coats of cement based paint complete all as specified and directed.
M&L for Two coats of cement base paint on walls over a coat of appropriate primer including preparation of plastered new surfaces complete all as specified and as directed.
Material & Labour for complete removal of existing treatment on walls by scrapping with steel wire brushes or sand paper & washing & rubbing down with water, and after cleaning the wall surface, facia of roof projections or chajjas surface and applying two coats of weather proof Exterior emulsion first quality paint of approved colour and shade on external wall surfaces etc complete as per manufacturer's instruction & as directed.
S&F in 0.63 mm thick Stainless Steel plate rack of size 900 X 750 X 220 mm complete all as specified & directed.
M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified & directed.
M & L for preparing surfaces of sunken floor by brooming down or steel wire brushing and cleaning the surface with water and applying a coat of Rendercon HBF water proofing coating as per Manufacturer's instructions over slab and sides of sunken slab complete all as required and as directed. M/s Fosroc Chemicals or equivalent as approved by GE.
M&L for complete removal of existing water proofing treatment from top of roof and canopies / chajjas of building including removal of debris out side MD land all as directed.
M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer, properly cleaning & drying the concrete surfaces complete all as specified and as directed.
(a) M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:3 complete with WPC ( Liquid WPC will be measured and paid for separately as "Supply only") .
(b) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm including cleaning of surfaces.
(c) Laying unrolled over the bitumen coated surface,3 mm thick polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm side overlap and 150mm end overlap. Over laps shall be sealed by flame as per manufacturer's instruction.
M & L for applying two coats of bituminous base aluminium paint on roof Surfaces including preparation of surface complete all as specified and directed.
M & L for Cement concrete tiles size 25cmx25cmx22mm thick, machine cut, machine pressed, set jointed and pointed in neat cement slurry with grey cement and pigments fixed in floors over & including 15 mm thick screed bed in CM 1:6 and polished complete all as specified and directed
M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for formwork to chullah hoods,chajjas, troughs and similar items including edges etc., work in rough finished flat surfaces of concrete complete all as specified and directed.
M & L for RCC (Nominal mix) 1:1.5:3 Type A1 using 20mm graded aggregate as in roof beams, cantilevers, bressummers, lintels beam over 1.5m span complete all as specified and directed.
M & L for RCC (Nominal mix)1:1.5:3 Type A1 using 20mm graded aggregate as in Chajjas etc complete all as specified and directed.
M&L Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild Steel TMT bar 8mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild Steel TMT bar 8mm dia cut to length bent to shape required including cranking, bending, as in stirrups and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L for second class hard wood plain fillets, square, rectangular or triangular in section, bull nosed, splayed, chamfered or rounded on one edge or face, sectional area exceeding 13 but not exceeding 25 Sq. cm., clean sawn, secured with nails or brads complete all as specified and as directed.
S & F Hasp and Staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 75 mm size complete all as specified and directed.
S & F Ball catches with 8 mm dia., steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
M & L for First class hard wood beads, straight (any Size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to store complete all as specified and as directed.
M & L Machine cut Kota stone slab flooring, 20-25 mm thick, over and including cement screed base 15mm thick in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.
M & L Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing, over and including 10mm thick rendering in cement mortar (1:4) , on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.
M & L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc., complete all as specified and directed.
M&L 75 mm thick as in sub base in PCC 1:4:8 type D2(using 40 mm graded crushed stone aggregate) complete all as specified and as directed.
M & L for providing, cement concrete (1:2:4), Type B-1 using 20 mm graded crushed stone aggregatet, as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
M & L hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.
M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for 50 mm thick Sand cushion under floors complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block, any shape and size, with grey cement and pigment, conforming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed.
Dismantling water tanks capacity exc 250 Ltr but n exc 500 Ltr and removing from site complete all as specified and directed
S&F rotational moulded polyethylene water storage tanks, double layered, (cylindrical vertical with closed top), capacity 500 Ltr, hoisted and fixed in position complete all as specified and directed.
M & L Cement concrete (1:4:8) Type D2 (using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.
M & L RCC (Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed.
M & L RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. complete all as specified and directed.
M & L RCC (Design mix M-25) in beams, cantilevers, bressumers, lintels over 1.50 m span complete all as specified and directed.
M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter, rough finished surface of concrete, complete all as specified and directed.
M&L formwork tosides of pillars, posts, struts, piers, columns etc square or rectanguar, rough finished surface of concrete, complete all as specified and directed.
M&L formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface, rough finished surface of concrete, complete all as specified and directed.
M&L brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.
S&F for MS angle iron in "Y" shape posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Concertina Coil of 450 mm dia of Approved Type/Make for laying on Y shape angle fixed on boundry wall etc complete all as specified and directed.
S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)
Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc complete all as specified and directed .
Taking down carefully Main switch and Distribution boards any make and size all as directed.
Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.
M & L Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed .
M & L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed (Note:-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire and one No. PVC conduit in One RM length Measured as one unit length.)
M & L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed . ( Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.00 Sqmm Earth wire and one No. PVC conduit in One RM length Measured as one unit length.
M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed for the following :-
(a) One light point/Bell point controlled by one switch 5/6 Amp.
(b) One fan point controlled by one switch 5/6 Amp.
(c) One socket point controlled by one switch 5/6 Amp on same board.
(d) One socket point controlled by one switch 5/6 Amp on Independent board.
Description all as per item No 145 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with earthwire 2.5 Sqmm solid copper conductor PVC insulated for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed .
S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed .
S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed .
S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed .
S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed.
S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed .
S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed .
Supply anf fixing in repair of LED lamp rotary type/holder type of 12 watt all as specified and directed .
Supply and fixing in replacement of decorative wall light fitting with Lamp 9 Watt made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.
S & F in repair Smart bright Batten Series, LED luminaire using LEDs 20 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start, In-built driver unit suitable for wall and ceiling mounting using brackets complete all as specified and as directed.
S & F in repair of LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible copper conductor cableof suitable size and length complete all as specified and directed .
S & F in repair Bulk head endura LED light fitting complete with10 Watt LED and making necessary electric connection to ceiling rose with copper conductor cable of suitable size & length complete all as specified & directed.
Supply & fix, in replacement, LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium grade not less than with 1.2 m.long bracket in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with two coats of aluminium paint over a coat of primer complete all as specified and as directed.
S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed .
S & F in repair MCB TPN 415 volts 63 Amps, 'B' Series complete all as specified and directed.
Supply and fixing Single phase ceiling fan 1200 mm sweep, five star rated permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm, Minimum air delivery 220 CFM with service value 629m3/min/watt, no of blades three, type of blade leaf 1.05 mm thick aluminium sheet, remote control radio frequency 5 speed +off timer option speed regulation, class of insulation two nos bearings including connecting wire complete with all as required and directed.
S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed .
Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, 'B' Series complete all as specified and directed .
Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, 'B' Series complete all as specified and directed .
Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.
M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised earth lead wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 20mm bore GI pipe medium grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:2:4) type B-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rate as quoted by the contractor.
S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as speified and directed.
Supply & fixing electronic energy meter tamper proof design digital technology of SINGLE phase 1 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories complete with fixing accessories on finished wooden box all as specified & directed.
Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and directed .
M/L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.
Excavation in trenches in any type of soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of pipe cables etc,. and getting out complete all as specified and directed
Returning filling in, including spreading levelling, watering and well ramming in layers not exceeding 25cm thick with earth obtained from excavation complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.
Supply and laying sand cushioning to under ground cable in trenches/ existing cable trenches/ducts, in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed . ( Note : Punned thickness shall be measured for payment)
Supply and lay bricks sub class 'B' laid dry abutting each other with gap between adjacent slab not exceeding 10mm over UG cable as in cable protection with width equal to the length of brick complete all as specified and as directed.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified & directed.
S&F in repair waste fitting brass CP 32mm dia for wash hand basin/sink all as specified & directed.
S&F PVC waste pipe size 32mm flexible for WHB/sink etc complete all as specified & directed.
Schedule of credit amount of Rs. 41,220.00 to be deducted during AOC
ELITE ENGINEERING COMPANY
upadhyay Builders
MAA SHARDA CONSTRUCTION
kamakshi construction
mandeka constructions
chandra builders
AROOP ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .