Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC | L1 | Accepted-AOC The lowest tenderer | |
| 2 | L2₹34.0 L+₹68,445 (2.06%)Rejected-Finance MCB Z 2 13519 ST NO 4 GREEN AVENUE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Not the lowest tenderer | |
| 3 | L3₹35.6 L+₹2.3 L (7.05%)Rejected-Finance 261 BHARAT NAGAR BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Not the lowest tenderer | |
| 4 | L4₹36.5 L+₹3.2 L (9.57%)Rejected-Finance GORAKHPUR UTTAR PRADESH | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | L4 | Rejected-Finance Not the lowest tenderer | |
| 5 | L4₹36.8 L+₹3.5 L (10.5%)Rejected-Finance | L4 | Rejected-Finance Not the lowest tenderer |
Tender Value
Refer Docs
EMD Value
₹92,960
Closing Date
2 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
SPL REPAIR TO BLDG NO P1 AT FARIDKOT MIL STN
2024_MES_635913_1
CA NO CWE SGNR T-58 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE FARIDKOT
As per NIT
9 documents required · 9 mandatory
₹500
GE FARIDKOT
₹92,960
15 Mar 2024
5 Jan 2024
5 Feb 2024
5 Jan 2024
2 Feb 2024
19 Jan 2024
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings upto 15 m height of bldg including necessary steel double scaffolding complete all as specified and as directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, bend to curve where required and fixed with self tapping screws upto 15 m height of bldg complete all as specified and directed.
S&F Plain, galvanised, mild steel sheeting of 0.63mm thick , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), bend to curve where required with grade of zinc coating 275 upto 15 m height of bldg complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint including preparation of surface complete all as specified.
M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over c coat of red oxide primer (for steel surfaces) including preparation of surface upto 15 m ht of bldg complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for including necessary steel double scaffolding complete all as specified and as directed.
S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. upto 15 m ht of bldg complete all as specified and directed.
M&L preparation of new or previously untreated surface of wood or wooden based surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
M&L for PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in floors complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified and directed
M&L Hard core of broken stone or boulders gauge not exc. 63mm deposited spread and leveled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.
Demotion of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge
M&L brick work by fly ash bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc upto 15 m height of bldg complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement upto 15 m ht of bldg complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound upto 15m height of bldg complete all as specified and directed. . Note : WPC 3% of cement content shall be included in quoted rate.
M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling in patches n.exc 3 Sqm upto 15 m height of bldg all as specified and as directed.
M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified & directed by Engr-In-Charge. Note : Payment for providing grooves shall be made separately.
M & L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for preparation of surfaces and applying two coats of white wash on newly plastered surface of ceiling etc complete all as specified.
M&L Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over a layer of chalk whitening complete all as specified & directed by Engr-In-Charge.
M&L for Washing, rubbing down and stopping of distempered and painted surfacesc of old plastered surfaces of walls & applying two coats of oil bound distemper complete all as specified & directed by Engr-In-Charge.
M&L for complete removal of existing treatment on old external wall surfaces of any description,preparation of surface and Finishing walls with Acrylic Smooth exterior paint of required shade : Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on old prepared surface complete all as specified by Engr-In-Charge.
M&L for replacement of old plasatered surfaces of ceiling and applying two coats white wash complete all as specified and directed by Engr-In-Charge.
Preparation of newly plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specified & directed by Engr-In-Charge.
M&L Preparation of old decorated srufaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Cement Base Paint of approved make inclusive all scaffolding (if required) complete all as specified and directed by Engr-In-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified.
M & L Coloured glazed ceramic tile(light colour) 450x300x7 mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 15 mm thick rendering in cement mortar (1:4) complete all as specified & directed by Engr-In-Charge.
M & L Non - skid (light colour) Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over including 15 mm th screed bed CM (1:6) and poined in white or colour cement to match complete all as specified & directed by Engr-In-Charge.
M&L Non Skid (light colour) ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, cut to reqd size and shape as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 15 mm thick rendering in cement mortar (1:4) set complete all as specified and directed.
M & L Non - skid (light colour) heavy duty endura tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15 mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by engr-in-charge.
M&L plain cement concrete 1:2:4 type B -0, 25 mm thick using 12.50 mm graded stone aggregates as in floor/ sub floor concrete complete all as specified and directed by Engr-In-Charge.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed by Engr-In-Charge.
S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with PVC clamps complete all as specified and directed.
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed
M&L in repair for Gypsum Board 12mm thick in ceiling Anodised Aluminium snap grid frame work for false ceiling fixed with screw and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longas per manufacturers instructions complete all as specified and directed.
S&F in repiar Factory made box type Steel windows with side hung shutters including pintol hinges with steel handle, 2 Nos 150mm MS tower bolts on each shutter and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.
S&F in repair Factory made box type Steel windows with side hung shutters including pintol hinges with steel handle, 2 Nos 150mm MS tower bolts on each shutter and steel peg stay, complete withot glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.
M&L mild steel framed work of Fe-290 (Gde E-165) as in grills/guard bars shouldered with steel windows/ventilators frames. Cooler stand, ladder etc including redoxide primer coat complete all as specified.
S&F Galvalnised Mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
Material and labour for repair of facia, parapet, slab edges, projection bottom etc using 20 mm thick cement mortar (1:3) over chicken wire mesh of size 24 SWG fixed with necessary nails, U clips at roof kerbs or mud stops or at junctions, rounded or chamfered on edges including necessary scaffolding, dubbing coat & scrapping of damaged/ deteriorated plaster and concrete the surface finished fair and even upto 15 m ht of bldg complete all as specified and as directed by Engineer-in-Charge
M&L for Mild steel TMT bars 6mm to 8mm , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends or welding into the existing bars and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames).
S&F powder coated (Thickness or powder coating not less than 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F Anodised aluminium door shutters, powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F in repair Figured glass, 4.0 mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane ,including hacking out of old glass upto 15 m height of bldg complete all as specified and directed.
S&F sheet glass of 4.8mm,ordinary quality and glazing with oil putty, glazing clips etc of area exc 0.5 Sqm in each pane,complete all as specified.
S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 100 mm long of extruded section complete all as specified and directed.
S&F Aluminium anodised handles, fabricated type anodised 150 mm long(Grip Length) complete all as specified and directed.
S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified
S&F in repair door closer hydraulically regulated, Aluminium (Extruded section body) designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified.
M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.
S&F Rubber sheet 50mm wide and of thickeness not less than 3mm fixed with stainless steel screws at the bottom of the door shutters complete all as specified.
M&L for repair of MS door of area n.exc 15.00 Sqm area to make fully functional by necessary welding, greasing, denting, oiling,one coat of synthetic enamel painting etc and fixing complete all as specified.
M&L in repair for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste incl in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required as directed by Engr - In Charge
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.all as specified and directed by Engr-in-Charge.
Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed/surface in wall/roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 2.8 mm thick plastic laminate Hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified and as directed:-
One light point/Fan point/Exhaust point controlled by one way switch
One three pin socket out let 5 amps on the same board with other switches
One 3 pin, 5A switch socket outlet point on independent board
All as per item No 61.00 above but with 2.5 sqmm cable for 1 No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor.
Supply and fixing in replacement PVC Lamp holder suitable for LED 5 to 20 watt blub complete all as specified and directed.
Supply and fixing LED bulb 1x10 Watt lamp having luminous efficancy warranty 2 year all as per specification & directed by Engr-in-charge.
Supply and fixing in replacement of LED tube light fiting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-charge.
M&L ceiling rose 3 terminal / PVC / polycarbonate isolated body complete all as specified and directed by Engineer-in-Charge.
M&L in repair submain wiring with two single core PVC FRLS insulated copper conductor 10 sqmm and same 10 sqmm for continuous earth wire drawn in to concealed PVC conduit including taking down submain wiring 2 run / 4 run with earthing cable and making good to disturbed area all as specified and directed by Engr-in-Charge. Note: Two run of wire, one run of earth wire and one run of PVC conduct shall be measured as one unit.
S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
S&F socket two in one 3 Pin 5 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
S&F Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
S&Fsocket two in one 6 Pin 15/16 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, including taking down unserviceable old DB any type including MCB etc and making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCCB/MCB shall be measured and paid separately under respective item of BOQ.
S&F MCCB 4 pole, 415 V. adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed by Engr-in-Charge.
S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door including taking down unserviceable old DB any type including MCB etc and making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engr-in-Charge.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 AMP, in the MCB DB complete with connection testing and commissioning complete all as directed
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as directed
Earthing complete with galvanised steel earth plate electrode of size 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal GL connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers and earth strip protected by 15 mm dia GI pipe medium grade and connected to main distribution board panel/earthing test point all as shown on electrical plate No.3 of SSR Part I and all as specified including testing on completion all as specified and directed by Engr-in-Charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying cables/poles foundation / stay assembly and getting out in soft/loosse soil all as specified and directed by Engr-in-Charge.
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm all as specified and directed by Engr-in-Charge.
Removing the excavated soil from the trench n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed by Engr-in-Charge.
M & L for sand cushioning with dry and clean locally available sand for underground cable 8cm before laying cable and 15 cm after laying cable and punned to 18 cm after laying of cable complete all as specified and directed by Engineer-in-Charge Note: Pressed thickness shall be considered for payment purpose
Supplying and laying factory made un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm standard size laid in trenches of across the cable protection all as specified and directed by Engr-in-Charge.
Supply and Laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and brick for protection to be measured and paid separately.
Supply and fixing in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/security luminaire, with driver, including suitable size GI bracket, electric connection, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge
Supply and laying steel water tubing, 40 mm dia ISI Marked, 'light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified.
Supply and fixing LED flood light 100 watt 230 V, AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp enclosed with glass cover including fixing arrangement in road light, security light etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable suitable size as directed by Engr-in-charge.
Supply and fixing PVC insulated stranded aluminium conductor cable PVC sheathed 2x2.5 sq.mm flat or circular including PVC heavy duty conduit of size 25 mm bore fixed to poles with suitable size clamps for connection of street light fitting from junction boxes complete all as specified.
Taking down and re-fixing only Exhaust fans and wall fan heavy duty complete with accessories any size. Three core copper flexible wire not less than 0.5 mtr for connecting from ceiling rose/connector to exhaust fan any size including not bolt with louvers shutte and spray painting complete all as specified and directed by Engr-in-Charge.
S & F DB x SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single pole complete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed by Engr-in-Charge.
Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50 Cycle per second, size 450 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge.
M&L for Crane Load testing of up to 3 ton EOT crane at 125% of the safe working load by providing dead load/load test block for capacity test on all the motions of cranes (dead weight load to be arranged by the Contractor). Note:- (a) Load for load testing shall be arranged by the contractor through OEM and record for the same shall be on kept in record duly signed by user’s rep / MES rep and no extra payment shall be made on this account. (b) load testing certificate furnished by OEM shall be submitted by the contractor after load tetsing for every individual crane complete all as specified and directed. (c) Contractor will ensure all the cranes are in serviceable condition before starting the load testing. If any crane are in unserviceable condition the same will be made serviceable before starting the load testing. (d) Contractor will done load testing on as and when required basis.
M&L for rewinding of burnt motor of capacity 5 HP CT motion of EOT crane transporting to & fro workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning all as directed.
M&L for rewinding the crane motor of capacity 1.5 HP to 3 HP and transporting to & from workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning all as directed by Engineer-in-charge.
M&L for rewinding of burnt motor of capacity upto 5 HP LT motion of EOT crane transporting to & from workshop cutting & taking out burnt copper winding wires cleaning complete with proper cleaning solution & rewinding with same gauge best quality copper enamelled winding wire and putting properly with packing materials, varnishings etc & drying & replacing wornout bearing/terminal plate, reassembling, fixing in original position, testing & commissioning all as directed.
S&F in replacement of galvanized steel wire rope of nominal dia 10mm having maximum Tensile strength of 1960 N/mm2 as per IS:2266 (2002) for EOT crane 3 ton as per existing make and type heavy duty complete all as specified and directed.
M&L for Replacement of heavy duty thruster brake electro megnetic type suitable for up to 3 Ton EOT Crane complete all as per site requirement and specified .
M&L in replacement of step down transformer 300 VA/415/110/24 volt suitable for upto 3 ton EOT crane complete all as specified and directed.
Taking down EOT Crane of capacity upto 3 ton crane cross member (whole structure) from the gantary with safe arrangement along with hoist, gear box,brakes, LT motor, CT motor, main hoist motor, LT panel and all other connected items. M & L in replacement installation, testing and commssioning of the following:- (a) Replacement of LT, CT and hoist motion gear box (b) eplacement of panel control wiring with 2.5 sq mm copper conductor (c) Replacement of push button station and rewiring (d) Reassembling , testing ,commissioning and complete installation of crane (e) Replacement of AC drive (f) Replacement of current colletor for three phase supply (g) Replacement of Limit switches for LT ,CT and hoist along with Master conroller (h) Replacement of power wiring of main panel with 6 sqmm flexible copper conductor for LT motion (j) Replacement of overload relay (k) Crane shall be painted with two coats of zinc cromate primer followed by two coats of golden yellow synthetic enamel paint.
Supply and fixing in replacement of Remote Control/ Pandent 110 V AC with Remote Capacity 3 Ton EOT crane for controlling LT, CT and crane hook motion including taking down old unsv remote complete all as specified and directed.
S&F in replacement of Power contactor 3 pole, 10 Amps, type MNX, 415 volts complete all as specified and directed.
Supply & fixing in replacement of Three Pole Power Contactor 3 phase 415V AC3 25 Amp. ML-1.5 with 2 N.O. + 2 N.C. Aux Contect Coil Voltage 110V AC complete all as specified & directed.
Supply & fixing in replacement of of Push Button Station 8 Way Made Out Poly Carbonate / Alumunium Dia Cast with 8 No. Push Button with Element complete all as specified & directed.
Taking out heavy duty MS duct cover 1200 mm x 700 mm x 8 mm or weighing upto 80 kg for taking out Rusted old MS pipe and refixing the duct cover after taking out pipe line and refixing the same of any size and capacity in the duct complete all as specified and as directed.
Supply and fixing in replacement of FRLS PVC copper conductor 1.5 Sqmm 8 core cable in surface/recesses including PVC heavy duty conduit , clamps including taking down old unserviceable wire complete all as specified and directed.
Supply and fixing in replacement of shrouded type TPN PVC insulated GI conductor DSL system having 63 Amps rating (Run of 03 Phase & 01 Neutral will be count as 01 RM) complete including welding works as per site requirement all as specified and as directed by Engr-in-charge. Note : Cost of necessary T&P required for fixing of DSL system in Hangar upto 20 mtr height are deemed to be included in the quoted rate.
N.G BUILDERS
Surindera Kumar Bansal
NAV DURGA CONSTRUCTION CO
LM CONSTRUCTIONS
BANSAL BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .