SPL REPAIR TO BLDG No. P-1 AND P-1510 AT JAISALMER MIL STN UNDER GE ARMY JAISALMER

Amount

B&R WORK Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for Non Skid ceramic colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,including 15mm screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge.

M&L for Glazed ceramic colour tiles in vertical surface 350x250mmx7mm/ 450X350 X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match in incl backing coat 10mm in CM 1:4 complete all as specified and directed by Engineer-in-charge.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick with gray cement and pigment, rubber moulded,set, jointed and pointed in neat cement slurry in floors and over 20mm th screed bed in CM (1:6) complete all as specified and directed by Engineer-in-charge.

S&F in repair soap dish stanless steel fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F in repair 15mm dia bib tap cast copper alloy cromium plated butterfly handle screwed down screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair pillar taps,fancy type 15mm dia cast copper ally, with captain heads, chromium plated, screwed down for iron pipe complete all as specified and directed by Engineer-in-charge. .

S&F in repair tubler towel rail brass chromium plated 20mm dia, D type 60cm long between flanges complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash hand basin white 550x440mm of size incl cutting for and pinning in ends of brackets or erecting stand incl brackets PVC waste pipe 15mm PVC connection pipe and cuppling of suitable size complete all as specified and directed by Engineer-in-charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore tubing, 'medium grade' ISI marked galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 20mm bore tubing, 'medium grade' ISI marked galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet pan(Pedestal pattern), white (EWC)with necessary P/S Trap including jet spray and seat cover to be fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs including flush pipe 32 mm dia and PVC connection 450 mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts and polythene washers of 450mm length complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed by engineer-in-charge.

S&F solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube suppling and fixing in pening as per specification and drawing complete all as specified and directed by engineer-in-charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by engineer-in-charge.

S & F 150 mm long Aluminium handles, cast type, anodised complete all as specified and directed by engineer-in-charge.

S&F medium weight Butt hinges 100 mm including necessary welding if required complete all as specified and directed by engineer-in-charge.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by engineer-in-charge.

S&F 30mm thick of PVC door shutter of approved quality with standard size of lock rail and bottom rail with one coat of PVC spray paint of approved colour to match with sorrounding doors etc complete all as specified and directed by engineer-in-charge.

Taking down cement plaster on brick/concrete/stone masnory surfaces of any description complete all as specified and directed by engineer-in-charge.

M&L rendering 15mm thick in 1:6 on fair faces of brick work or concrete surfaces finishing even and smooth complete all as specified and directed by engineer-in-charge.

M&L rendering 5mm thick in CM 1:3 on ceiling concrete surfaces finishing even and smooth complete all as specified and directed by engineer-in-charge.

M&L for rendering 15 mm thick on concrete surface in cement mortar 1:4 including water proofing compound and finished even & smooth without using extra cement complete all as specified and directed by engineer-in-charge. Note : WPC will be measured and paid separately under relevant item

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered/unplasterd surfaces of ceiling and applying two coat of white washing complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads and S&F plain sheet glass of 3 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Taking down old steel window/ventilators without taking off shutters from the frames of size n.exc 1.5sqm of any description not otherwise specified and in any position complete all as specified and directed by Engineer-in-Charge.

S&F steel ventilators with top hung shutters fitted with box type hinges including MS peg stays, MS handle and glazing bars dovetailed or welded for receiving glass including painting with one shop coat of zinc chromate primer and cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded aggregate and making good the disturbed surfaces in CM (1:3) and applying two coats existing wall finishes to match with existing colour complete all as specified and directed by Engineer-in-Charge. Note : The rates quoted are inclusive of making good all the disturbed surfaces to match with the adjoining surfaces and necessary scaffolding etc up to 4th floor.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

M&L sand stone slabs 5cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. not exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed by Engineer-in-Charge.

Dismantling of water tanks and removing to store capacity of tank exc. 500 but not exc 1000 ltr complete all as specified and directed by Engineer-in-Charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed by Engineer-in-Charge.

Providing Post Construction Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer-in-Charge.

Providing Post Construction Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed by Engineer-in-Charge.

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise superficial area n exc 100 sq cm complete all as specified and directed by Engineer-in-Charge.

M&L for demolition of Mud in roofs, any thickness, inclucing plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engineer-in-Charge.

M&L for mud phusska of 600mm thickaverage consolidated thickness, mud phuska on flat roofs including 25mm thick mud plaster and 3 mm thick leeping plaster complete all as specified and directed by Engineer-in-Charge.

Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified and directed by Engineer-in-Charge. Note : Demolition should be done by chiselling.

M&L for PCC (1:2:4) Bo using 12.5 mm graded stone aggregate as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc. with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope complete all as specified and directed by Engineer-in-Charge. Note :- Supply only water proofing compound shall be measured & paid separately under relevent item

Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.

M&L for providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application incl applying evenly bitumen tack coat primer of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces and laying over finished surface with screed of 25mm thick CM 1:4 with water proofing compound complete all as specified with the following specifiations:- (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) Providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm. (ii) Net wooven polyster weight >160 gm/Sqm (iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm (d) Over the membrance provide a finishing with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane Note:- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane.

E&M WORK Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes etc complete all as specified and directed by Engineer-in-Charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-Charge.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-Charge.

Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 1.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for condits and IS : 3419 - 1976 for conduit accessories) with terminated to new pressed flush metal boxes readily available cover with outer plates inner plates et, suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge for the following :- Note : Modular switch and socket shall be measured and paid separately.

All as per Item No. 56.00 here-in-before but for one light point controlled by one switch

All as per Item No. 56.00 here-in-before but for one fan point controlled by one switch

All as per Item No. 56.00 here-in-before but for one bell point controlled by one bell push.

All as per Item No. 56.00 here-in-before but for one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per Item No. 56.00 here-in-before but for one 2/3 pin socket outlet 5Amps on independent board.

All as per Item No. 56.00 here-in-before but for point wiring with 4.0sqmm single core multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 volts grade and 4.0 Sqmm PVC insulated and unsheated (FRLS) cable 1100 volts grade with multi stranded copper conductor as earth wire for 15/16 Amps multi porpose socket combination point on independent board.

S&F modular switch one way 6A, 1 module complete all as specified and directed by Engineer-in-Charge.

S&F modular socket 6A-2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

S&F modular switch socket combined 6A/16A , 6 pin, 3 module complete all as specified and directed by Engineer-in-Charge.

S&F step type modular fan regulator 120W -2 module ISI Marked with valid CML No complete all as specified and directed by Engineer-in-Charge.

S&F Modular bell push 6A 1 module complete all as specified and directed by Engineer-in-Charge.

S&F Ceiling rose, three terminals PVC/polycorbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

S&F Bell multi music type call bell AC 230 volts single pole complete all as specified and directed by Engineer-in-Charge.

S&F vertical DBs TPN 4 way 415 V double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 250 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required,suitable for TP/FP MCCB as incomer with 01XMCCB 160A and with provision of SP/TP MCB's as outgoing MCCB FP 160A , 25 KA complete all as specified and directed by Engineer-in-Charge.

S&F MCB DB SPN 12 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engineer-in-Charge.

S&F MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engineer-in-Charge.

S&F MCB's TPN 40 to 100 Amps, 415 Volts,10 kA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-Charge.

S&F MCB's single pole and neutral 40 to 63 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-Charge.

S&F MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engineer-in-Charge. Note :- Two runs of 6.00 Sqmm cable & One run of 6.00 Sqmm cable continuity earth and one run of PVC conduit with all necessary accessories shall be paid as one unit length

M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 10.00 Sqmm (FRLS) in conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 10.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engineer-in-Charge. Note :- Four runs of 10.00 Sqmm cable & Two run of 10.00 Sqmm cable continuity earth and one run of PVC conduit with all necessary accessories shall be paid as one unit length

M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps, 240 volts complete all as specified and directed by Engineer-in-Charge.

S&F builidng security light fittings wall mounted led Light of Capacity 36 Watt With inbuilt Driver having Pressure die cast Aluminum housing, IP-66 Having Efficiency of ≥ 100 Lumens/Watt, Operating voltage 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , both fixture /luminaire & driver must have separate BIS marked registration and it must be mentioned clearly on fixture & as well as on driver also suitable for 30 to 40 mm O.D mounting Pipe and connecting with three core copper flexible cable of size 1.50 Sq mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair of repair bracket of GI pipe medium grade of 40mm dia ,1.2 meter in length clamps made of FI 40 mm x 6mm incl nuts ,bolts & washers including two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F wall mounted and surface LED tube light along with fixture ,4 ft ,20W ,extruded aluminium housing provided for efficient heat disspation with polycarbonate ,operating voltage 240 V ,50HZ ,AC supply and operating tempureture 0 to 50 C ,power factor >0.9 ,lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe complete all as specified and directed by Engineer-in-Charge.

S&F of recessed/ceiling mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas Brilliance 36watt LED, size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-Charge.

S&F LED down lightrecess mounted/Surface mounted/POP mounted or as per site requirement, square/Round type worm white / Neutral white or 2700 K- 3000 K as per user requirement 18 watts with efficiency of 100 lumens per watt, in worm white/ neutral white as per site requirement sleek design aluminium housing polycarbonate diffuser white finish operating voltage from ceiling rose to fitting complete all as specified and directed by Engineer-in-Charge.

S&F LED tube light fitting 10 watt tube LED Neutral white in colour, 600 mm in length wall mounted LED batten,extruded aluminium heat shink provided for efficient heat dissipation & integrated electronic driver,optic diffused type including all electric connection with whilte flexible cord 1.50 Sqmm 3 core as required complete all as specified and directed by Engineer-in-Charge.

S&F LED focus light 10 watt housing die cast aluminium powder coated in white finished provided with fixing on surface complete all as specified and directed by Engineer-in-Charge.

Taking down fan of any sweep sealing cable end dismanting blade and removing fan and blade to store complete all as specified and directed by Engineer-in-Charge.

M& L for painting of ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and directed by Engineer-in-Charge.

Fixing only and fixed in repair of ceiling fan at bldg any sweep any make, cleaning throughly, servicing of fan motor & parts fitted there in, oiling, greasing to bush / bearings, replacement of unserviceable parts if required, re-assembling, testing hanging at site complete all as specified and directed by Engineer-in-Charge. Note :- Rate Quated by Contractor shall be inclusive for replacing all unsv item like quater pin ,nut bolt with check nut ,rubber real etc

Fixing only and fixed in repair of exhaust fan at bldg any sweep any make, cleaning throughly, servicing of fan motor & parts fitted there in, oiling, greasing to bush / bearings, replacement of unserviceable parts if required, re-assembling, testing hanging at site complete all as specified and directed by Engineer-in-Charge. Note :- Rate Quated by Contractor shall be inclusive for replacing all unsv item like quater pin ,nut bolt with check nut ,rubber real etc.

S&F in repair of Air termination, single pointed aluminium rod 12 mm dia 300 mm long with base fixing complete all as specified and directed by Engineer-in-Charge.

M&L for bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron strip 25x4mm as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on complete and including taking down earthing of any description complete all as specified and directed by Engineer-in-Charge.

M&L for aluminium strip 25 x 3 mm with saddles and fixing screws etc. for roof conductors and down onductors above ground complete all as specified and directed by Engineer-in-Charge.

M&L Earthing Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex. head screw complete all as specified and directed by Engineer-in-Charge.

S&F in repair of insulators made out of porcelain for fixing the lightening roof conductor and the down conductor complete all as specified and directed by Engineer-in-Charge.

S&F TV/Telephone Socket outlet including M.S Box of size 100x100x65 mm with cover plate complete all as specified and directed by Engineer-in-Charge.

S&F rigid non metallic PVC conduit exclusive of boxes (junction/terminal ) but inclusive of all tees ,bends,elbows ,reducers ,bell mouth tube ends and fixing accessories such as coupler ,lock nuts ,saddles ,pipe hooks etc complete all as specified and directed by Engineer-in-Charge.

S&F PVC Juction Boxes (1 to 4 way) 20 mm dia complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe/pole etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engr-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as specified and directed by Engineer-in-Charge. Note :- For the purpose of payment only punned thickness will be measured

Supply & laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone patti cable cover 25 cm to 30 cm wide and n.exc 60 cm long each laid dry abutting with each other with maximum gap between adjacent slabs n.exc 10 mm complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning of LTUG, XLPE insulated, heavy duty, 1100V grade of size 185 Sqmm 3½ core electric cable with aluminum conductor, served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and overall PVC sheathed, laid in trenches or passing through pipe, making all connections with and including provision of necessary glands, lugs, bushing etc as required complete and including taking out old unsv existing cable complete all as specified and directed by Engineer-in-Charge. Note : Earthwork excavation sand cushioning ,Jodhpur Stone patti, GI protection pipe shall be measured and paid separately under relevant items.

All as per item No.103.00 here-in-before above but size of electric cable 95sqmm 3.5 Core.

All as per item No.103.00 here-in-before above but size of electric cable 50sqmm 3.5 Core.

All as per item No.103.00 here-in-before above but size of electric cable 35sqmm 3.5 Core.

M&L for bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground level connected to galvanized iron strip 25 x 3 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including all necessary earth work, excavation, earth chamber with PCC 1:3:6, type C1 and RCC chamber cover of PCC 1:2:4 with handle and 20mm dia GI watering pipe with funnel and wire mesh etc and testing on complete and including taking down earthing of any description complete all as specified and directed by Engineer-in-Charge..

Supply, Install, Testing & Commissioning self supporting outdoor type totally enclosed LT Panel of suitable size , IP-65, compartmentalised design, dust and varmin proof of suitable size suitable for 440 Volt 3 phase 4 wire system made out of 3.15mm thick CRCA sheet and built upon rigid frame work having front and rear hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts ;and washers etc. The pannel shall be painted with two coats of red oxide primer and final finish of synthetic enmelled gray paint and incomming/outgoing cable holes at the bottom. The Panel shall be emmbeded with 50 x 5 mm MS Angle Iron frame and 30 cm above the normal ground level complete with PCC foundation (1:2:4 ) type B2 complete and including taking down old existing panel of any description etc complete all as specified and as directed by Engr -in -Charge. Note : All Internal connection of MCCB from BUS Bar made By using Aluminium busbar of rated Capacity (a) Aluminium bas bar 600 amps of Size 60x10mm - 04 Nos, supported with suitable size of heavy duty PVC stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCCB 400 amps, 415 volt, 35 KA Breaking capacity 4 pole duly connected to bus bar As in coming -01 Nos (c) On Load Chnge Over 400 Amps, 415 Volt, TPN Make : HPL/Havells

Contd.. Serial Item No. 108.00 OUTGOING:- (a) MCCB 250 amps, 415 volt,36 KA Breaking capacity 4 pole duly connected to bus bar -02 Nos (b) MCCB 200 amps, 415 volt, 25 KA Breaking capacity 4 pole duly connected to bus bar-01 Nos (c) MCCB 160 amps, 415 volt, 25 KA Breaking capacity 4 pole duly connected to bus bar-02 Nos (d) MCCB 100 amps, 415 volt, 25 KA Breaking capacity 4 pole duly connected to bus bar-01 (e) Digital type Multifunctinal meter CT operated class 1 accuracy suitable for measuring v, A,PF,kW,kva etc 3 Phase, 4 digit, high resolution, LED type with one side programmability – 01 No. (f) LED Indicating lamp (set of three) - 01 Set. (g) Internal control wiring with 1100 volt grade 1.5 Sq.mm stranded copper cable as per colour coding for all connections with suitable size lugs as required and as specified.

M&L for cutting the existing bituminous road / hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6, type C1 using 20mm graded aggregate complete all as specified and directed by Engineer-in-Charge.

S&F GI pipe light grade of dia 50 mm laying in road and along with poles for cable protection and including taking down old pipe complete all as specified and directed by Engineer-in-Charge.

All as per item No. 110.00 here-in-before above but size 80mm dia.

MARUDHARA CONSTRUCTION COMPANY (BID ID -3336638)

BHAGWATI CONSTRUCTION (BID ID -3333637)

M/s Shri Inder Construction Company (BID ID -3331583)

M/S R.K. Builders & Developer (BID ID -3341873)