REPAIRS TO PERIMETER SECURITY WALL,PATH, HARD STANDING AND DRAINS AT CABS,INS TANAJI,NOFRA AND NSB UNDER GE (NW) MANKHURD

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessar drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 gde E

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing debriss out side of camp area.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded aggregate) AS in sub base of flooring complete all as specified and as directed

M& L Pre Polished Chequred cement concrete tiles 30cm x 30 cm x 20 mm thick, set, jointed and pointed in near cement slurry in floors with mixture of grey white cement in equal proportions over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 complete all as specified and as directed Make :- Gems / Orient/ Nitco/ Ntc or equivelent

M&L Machine pressed precast concrete interlocking paver block Coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over and including 25 mm thick sand cushion complete all as specified

M&L of cement concreteType B-2 1:2:4 (40 mm graded aggregate) posts (including caps and bases) bed blocks , retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded agg as in coping all as specified and directed.

M&L for PCC 1:2:4 type B2(20mm graded aggregate) as in surface channels and drains complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto

M&L Pre-cast cement concrete cover slab for manhole and drain cover in plain cement concrete 1:3:6 type C-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces including demolition of existing RCC cover complete all as specified and as directed

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), in cluding all mould- ings but excluding frame type C0 1:3:6 (using 12.5 mm graded aggregate) setting in cement mortar 1:6, including demolition of existing louvres and jallies complete all as specified and as directed complete all as specified and completed

M & L for ready mix cement concrete M-25 for flooring , including provision of necessary formwork and broom finishing the surfaces without using extra cement complte all as specfied below and directed :- Note : Flooring concrete shall be laid in panels not exceeding 12 Sqm each.

Supply and Installation & stamping on the freshly laid new concrete including finishing & coloring the top surface accurately to the required level, shape and size (min 4mm thk.) using approved colour shade Colour Hardener and Powder Release Agent and stamping it using approved stamp pattern and antiquing it on top with approved colour using Antiquing Agent Sealing the entire area of stamped concrete using Concrete Sealer. Including staining the extra and above the stamping surface with Acid/Dye/Enviro stain before application of sealer,including formwork with M.S. angle and compaction of concrete etc complete as directed By GE

M&L for joint cutting in concrete surface 8-10mm wide mechanically and filling with polyurethane material upto 12-15mm from the top surface all as specified and directed

Excavation in trenches,n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in soft/loose soil any type of soil complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

Returning,filling in,including spreading, levelling,watering and well ramming in layers n.exc 25cm thick in soft/loose soil.

Demolition and breaking up drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar , in any internal dia and taking out of trenches if required complete all as specified and as directed.

M&L reinforced concrete pipes, class NP - 2, 300 mm bore, laid in trenches and jointed complete with collars Complete all as specified and directed.

M&L reinforced concrete pipes, class NP - 2, 150 mm bore, laid and jointed complete with collars Complete all as specified and directed.

M&L for 300 mm thick Concrete bed to drain pipes in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 300 mm bore pipe complete all as specified and as directed

M&L for 150 mm thick Concrete bed to drain pipes in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed

Dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish

M & L 20 mm thick Baroda Green Marble Stone Slabs as in flooring, treads, risers, pillars ,landing etc bedded, jointed and pointed with grey cement slurry mixed with pigments to match with the shade of slab including cutting and polishing, laid over and including 15 mm thick screed bedding layer in CM 1:4, complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match Colour is approved by GE

M&L for Durastone Heavy Duty vitrified tiles (300x 300) x 10-12 mm thick in floor set and jointed with neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 complete all as specified.

Dismantling of brick work /stone bouldersbuilt in cement mortar including all quins, arches, pillars etc complete all as specified and as directed.

M & L for brick work in CM (1:6) using sub class 'B' bricks strainght or or curved as curved as required on plan exc 6mtrs mean radius etc.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, as in wall etc complete all as specified & directed. Note: PCC bond stone and face work shall be measured and paid separately.

Ditto All as per item No 35 but except stone

M&L for pre-cast cement concrete block masonary with solid blocks(1:2:4) (20mm graded agg), exc 10 cm in width and setting in cement mortar 1:6 Type B-1 (using 20mm gradedaggregate)

Extra over stone walling for hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 20 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified.

Extra over stone walling for hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified.

M& L for raised pointing to random rubble masonry uncoursed or brought upto courses in CM 1:6 , complete all as specified & directed.

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New / Old surfaces.

Dismantling old chain link fencing of any size or mesh.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only Chain link MS galvanised fencing, any size or type complete all as specified

M&L for PVC coated galvanised chain link fencing of wire mesh size 50 mm x50mmx3mm weighing not less than 2.18 kg/sqm (weight inclusive of PVC coated) PVC coated line wire etc including fixing line wire to angle iron posts / rails straining bolts with provision of binding wire etc complete all as specified

S & F in repairs barbed razor type concertina coil DG hot galvanised spring for site wire as approved by GE, 1.45 to 1.50 Kg/metre and dia of coil when stretched 610 mm complete all as specified and directed..

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provn of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed.

M & L Broken glass coping on top of walls in CM 1:3 including demolition of old coping and preparation of surface complete

S&F steel scews bolts (Machine made) made hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with one hexagonal or square nut , exc 5 cm but nexc 10 cm long dia of shank 5 to 10mm complete all as specified and directed.

Supply and fix Round bars 10 mm dia for securing chain link fencing complete all as specified and directed.

M & L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of previously untreated surfaces of steel and iron exc 10 cm width or girth. Note : A sum of Rs 37,775.00 towards sch of credit shall be deducted to arrive the contract sum

AM ENTERPRISES

mp construction co

Joy builders

Parmatma Enterprises

Vishal Builders