COMPREHENSIVE DAY TO DAY MAINT CONTRACT INCLUDING B/R AND E/M SERVICES FOR MD ACCN AT MIL STN MOUNT ABU UNDER AGE (I) UDAIPUR

Amount

Notes- Applicable for all items:- (a) Establishment of complaint cell:- (i) Complaints cells will be established near MES office (As per locations given by Engineer-in Charge/I/C Out Stn MES (Army) Mount Abu. The complaints cells in the ibid contract will be one (01) only. (ii) Contractors will deploy manpower/tradesman with requisite tool & plant for smooth functioning of all complaint cells under subject work. The details per complaint cell is as given below :- (aa) Attendant - 01 per complaint cell. (iii) Supervisor - As required for management of all the complaint cells under subject tender in consultation with AGE(I)/Engr-in charge/JE Concerned. (iv) The complaints in the cell will be received through complaint register /site orders book/ verbally/ Telephonically /ARMAAN or any other mode/system as evolved and intimated by concerned JE/Engr-in-Charge. The contractor shall take immediate action to register and attend all the complaints. (v) The complaints will be addressed though complain slips and contractor will be prepare abstract of all the complaints received and action taken thereof on daily basis and will submit to concerned JE/Engr-in-Charge. (vi) Completion : Complaint slip will be signed by user after resolve the complaints and further deposit to concerned JE/Engr -in-Charge on daily basis.

Notes- Applicable for all items:- (vii) The number of workers shall be increased bases upon number of complaints and quantum of work involved during working hours as decided by concerned JE/Engr -in-Charge.

Notes- Applicable for all items:- (viii) T&P :- (aa) The contractor is responsible to provide all T& P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (ab) Any other misc works/services connected with user facilitation as per direction of Engr-in-Charge/I/C Out Stn MES (Army) Mount Abu. (ac) The responsibility of taking the tradesmen to complaint site will be of contractor. (ix) Sign Boards :- For each complaint cell, adequate flex sign board of approved size will be placed in complaint cell by contractor. The content of the flex board will be approved by Engr-in-Charge/I/C Out Stn MES (Army) Mount Abu.

Notes- Applicable for all items:- (b) Penalty Clause Contractors will pay penalty on account of non addressal of complaints in given time frame and quality of feedback as per matrix given below. The penalty will be levied by Engr-in-Charge/AGE (I) after ascertaining the quality feedback given by user and time taken to address the complaints and justifiable delay, if any. The penalty matrix is as given below :- PENALTY Time delay Satisfactory Partially satisfied Not satisfied Less than 24 hrs Nil Rs.100 Rs.200 24 hrs to 48 hrs Rs. 200 Rs.300 Rs.400 48 hrs to 72 hrs Rs. 400 Rs.500 Rs.600 72 hrs and more Rs. 600 Rs.700 Rs.800 c) Management of urgent nature of complaints such as leakage, water over flow, sewage, Airlock leakage, No electricity on holiday and after 5 PM till 9 AM everyday will also be the responsibility of contractor. For the same adequate tradesman and helper of lack type etc will be made available in each complaint cell by the contractor. (d) All above aspects shall deemed to have been included in the quoted price by the contractor. (e) Recovery on non wearing of uniform :- The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 100/- per person per day. (f) The quoted rates shall be deemed to be included of all provisions mentioned above. The decision of accepting officer in this regard shall be final and binding and without prejudice to all. No claim/representation shall be entertained in the subject matter.

Checking and attending to leakages in bib taps, mixer, stop cocks, angle valves, flushing cistern, GI pipes etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings including replacement of defective material/items and all connected plumbing works etc complete all as spd and directed.

Checking and attending to welding work in repairs to steel windows, handles,door springs, iron frame of doors, rolling shutter garrages and other iron misc works, repair by welding ( run or spot welding as per site require ment) including replacement of defective items/material alongthwith & including welding machine gloves, welding glass, welding rod any other tools required, as per requirement complete all as spd and directed.

Checking and attending to carpenter work in repairs to joinery (wooden/steel/aluminium) including iron/aluminium mongery, pelmet box, door spring, rolling shutters etc requiring carpentery work and carrying out minor repair such as tighting of screws/nails, wire of false ceiling, easening of joinery, door spring etc including replacement of glass panes, wirelcoth to joinery or any defective items/materials complete all as spd and directed.

Checking and attending to cleaning and maintenance of sewage system including blockage/choke in WHB, bottle traps, kitchen sink/Nahani tras/floor traps, water closet, soil/waste pipe running on external walls of bldgs including junction holes of any description and sewage line of any sizes upto first manhole in running/flowing order without blockage of any description in any situation manually and mechanically as required including all equipment viz bamboo,tools, sewage pump, sewage machine etc including replacement of defective items /materials and refixing covers to manhole/ gully trap in position etc. after cleaning and removing the deposited sludge/ solid/ liquid material outside MD land complete all as spd and directed.

Note for Item No. 3.00 to 6.00 :- (i) Contractor or his supervisor / site Engineer will report daily at 09:00 hrs at complaint cell for collection of complaints from the concerned JE in Charge in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs , the facts shall be brought to the notice of JE than after to Engineer in charge by the contractor/ his rep immediately. If Engineer-in-Charge is satisfied with contractor view, no recovery will be made on this account. However complaints related to sewage line blockage/pipe replacement etc whatever is applicable shall be attended on same day whether it is 'Sunday' or 'Gazetted hoidays' and nothing extra shall be payable to contractor on this account. (ii) Contractor or his supervisor/site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaint register, issue of complaints slip to tradesmen and enter after completion in complaint register. (iii) The complaint shall be attended & defect shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday and Gazetted holiday commencing from date and time of notifying the complaint slip failing which a penality @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/ imposed on the contractor and necessary recovery shall be made from his dues on this account. The contractor at the begining of contract will provide printed 30X complaints slip books as per performa let with 400 leaf each booklet. (iv) Any item / material which are required to be replaced shall be paid under respective item under this schedule here in after as Supply only. (v) The labour/tradesmen required for replacement of 'Supply only' items are included under this item. However labour charges for items where indicated 'M&L', 'S&F' and 'in repairs' shall be included in respective items. (vi) The above all aspect shall deemed to be included in the quoted rate of the respective item

Supply and fixing in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows/doors complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) area n.exc 1.5 sqm each pane from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as including in repair complete all as specified and directed.

Supply and fixing for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as in repairs complete all as specified and directed.

Supply and fixing in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished

Supply and fixing in repair Door closer aluminium (extruded) hydraulically regulated designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed.

Supply and fixing in repair double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed.

Supply and fixing in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.

Supply and fixing in repair for 75mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified.

Material & labour in repair for 2nd class hard wood plain fillets, square, rectangular in section, making rebates for fixing prelaminated cupboard shutters clean sawn, secured with nails or brads in sectional area exc 13 & n. exc 25 sq. cm fixed with nails.

Supply and fixing in repair 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.

Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size area exceeding 1.5 sqm and not exceeding 4.00 sqm each

Taking down shutters of any description, area exceeding 1.00 sqm and not exceeding 2.00 sqm each complete.

Taking down shutters of any description, area exceeding 2 sqm each complete.

Material and labour for taking down and refixing in same opening wooden shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc.

Supply & fixed Powder coated aluminium windows/ventilator/partition etc fixed/openable type or sliding without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified.

Supply & Fixing 5.5 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete .

Supply and fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete.(Make:Parryware/Cera/Jaquar Essco/Prayag)

S&F in repairs vitreous china wash down water closet pedestal pattern white complete and connectin to single symphonic action type including PVC flushing cistern 10 ltr capacity and fixed in floor with brass screw, Seat and cover for pedestal pan & Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge Make : Hindware/Parryware

S&F in repair vitreous china EWC one piece Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 360x660x755 mm, S Trap- 220 mm all as specified and directed. (Make -Jaquar Essco, Brand-Aspire, CAT No: AIS-WHT-01851S220SPPSM or Eq.)

Supply and fixing in repair Plastic water closet seat cover, any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete.(Make:Parryware/Cera/Jaquar Essco/Prayag)

Supply and fixingin repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity (Make:Parryware/Cera/Jaquar Essco/Prayag)

S&F in repair Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) all as specified.(Make:Parryware/Cera/Jaquar Essco/Prayag)

S&F in repair Vitreous china wash hand basin (550X400mm) white with pedestal , flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor complete all as specifed and directed. (Make:Parryware/Cera/Jaquar Essco/Prayag).

S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.

S&F in repair CP brass Urinal spreader of any colour for fixing with 15mm dia pipe. (Minimum weight 60gms).

S&F CP brass health faucet fitted with bracket, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

Supply & fixing in repair CP brass Jet spray for water closet pan pedestal pattern in repair.

Supply & Fixing in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified

Supply & Fixing in repair self closing/auto Casement type hinges 90/180 degree. (Make: Haffle/ Dorma/Hettich)

Supply & Fixing in repair stainless steel kitchen rack, basket Trolley grill type or perforated type or wire type or other any type of approved make all as spd.

Supply & Fixing in repair Telescopic steel channel ball bearing drawer channel silver/chrome plated size 250/300 mm etc ( Make : Hettich/Haffle/KEA)

Supp and fixing in repair brass chromium plated head shower with revolving joint and 150 mm long shower.

S & F of GI water tubing, medium grade with fittings, fixed to wall and ceiling or laid in floor of size 15 mm bore.

- ditto - but 20 mm bore

Supply & Fixing in repair 5mm thick Corner glass shelf size 200 mm radius with and including bracket and glass complete set etc.

S & F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and directed.

Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc. (Make- Jaquar Cat No-AHS-1581H)

S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified.

Supply & Fixing in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repair Brass CP bath Mixer 2 in 1 System with provision for overhead suitable 15mm bore of pipe and fixed.

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type.

Supply and fixing in repairs of fancy type chromium plated Bib tap, 15mm bore any make as given in list of makes as directed by the GE.

S&F in repair for 15mm bore stop valve (angle valve), cast copper alloy chromium plated screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Material and labour PCC 1: 2 : 4 type B-1 ( using 20mm graded crushed stone agg.) 40mm thick as in floor finishing surfaces of conc topping even and smooth with using extra cement .

Supply only glass dividing strips ,3mm thick, 38 mm wide laid in position conforming to design pattern as approved by Engr-in-Charge.

Demolition of stone slab and tiling of any description or thickness laid, bedded and pointed in any mortar

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete.

M&L for 18-20 mm thick green marble slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting polishing, half round moulding and cutting of holes for gas pipe complete.

Material and labour for machine cut Kota stone slab 18-22 mm thick (of size not less than 55 cm x 55 cm in flooring and 120 cm x 25 cm in treads) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including half round edge moulding, cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:4) base including rubbing and mirror polishing, complete all as specified.

S&F Chequered cement concrete tiles 30cm X 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 15mm thick screed in CM 1:4 complete all as specified and as directed.

M & L for light coloured Glazed ceramic tiles in vertical surfaces size 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles.

Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

All as per item No 67 above but in skirting, vertical surface dadoes and riser etc. over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material & Labour for Vitrified light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with cement mortar and pointed in white or coloured cement to match over and with including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material & Labour for Vitrified light coloured tiles 8-9 mm thick of size 600 x 100 mm on polished on vertical faces of walls set and jointed with cement mortar and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) all as spd and directed.

Material & labour for 20mm thick granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to matchwith shade of granite over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc.

Material and labour for rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete.

Material and labour for rendering 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound including preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete. Note:-Supply only of W P C shall be measured and paid separately.

Material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coats of white wash complete.

Material & Labour repairing and making good of out side portion of window such as jambs, cill and head portion of windows and chajjas area between 0.5 sqm to 1 sqm at FF of bldg with rendering 15mm thick on stone masonry / brick surfaces as in CM (1:4) with and including liquid water proofing compound surfaces finished even & smooth (without using extra lime or cement) including taking down cement or cement lime plaster, any description etc. and and applying two coat of cement base paint complete all as specified.

Supply only integral water proofing compound

Supply & fixing in repair rubber based door strip fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width & length as required at site

S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete.

Supply & fixing in repairs stainless steel type certain rod 22 to 25mm dia as per sample

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair complete all as specified.

Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified.

Supply & fixed in repair stainless steel plate rack made out of 1.00mm thick sheet 900x900x200mmcomplete all as specified.

S&F in repair brass CP soap dish incl brass CP screws and wooden cleats complete all as specified and directed by Engr-in-Charge.

Easing of door shutters, window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Repairs to existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper directed by Engineer-in-Charge.

Supply and fixing in repair 100 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.

Supply and fixing in repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as directed.

Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings.

Supply and fixing in repair 300mm long MS sliding door bolts ISI marked bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.

Supply and fixing in repair 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F aluminium in repair handles extruded type of size 125mm, complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

M&L Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed in repair.

S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete.

M&L 32 mm bore waste fittings, brass, chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete.

Supply and fixing in repair PVC Flexible waste pipe 32/40 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.

Supply and fixing in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.

Supply and fixing in repair aluminium hat pegs, solid body 175mm to 250 mm , peg sets of 6 Nos peg set of good quality complete all as specified and directed

Material and labour for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

Material and labour for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

S & F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete.

Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity.

Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity.

Taking out (desilting) silt, Brick Bats, debris, liquid waste sludge in solid/ semi-solid state from Manholes upto depth of 1.50 mtr including pumping out sludge where ever necessary plugging diverting the flow in the drain, removing of silt/sludge in deposit away from the edge of manholes, by mechanical means such as jet auger and mechanical vacuum tank as directed including use of safety belt, mask, dry cells torch for lightening inside the manholes and taking similar precautionary measures and removing the sludge etc outside MD land in covered container and cleaning the manholes and surrounding with clean water, and closing the manhole with cover etc all as specified and directed:-

Desilting of septic tank / sewage tank at sewage pump house any size including cleaning and taking out mud/ sludge, scum, silt (both organic and inorganic nature) etc from septic tanks by mechanical means of any depth, in foul conditions and confined places including use of safety belt, mask, dry cells torch for lightening inside the tank and taking similar precautionary measures, getting out and removing the waste/ Sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land as directed by Engineer-in-Charge complete all as specified and directed. Note: Net contents of sludge shall be measured at the time of removal and paid. Quoted rate of tenderer is deemed to be inclusive of dewatering as required and nothing extra shall be admissible to the contractor on this account.

Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5 Mtr wide and n exc 1.5 M deep and getting out in hard rock by using of mechincal plant or chisel cutting for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan all as specified.

Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick all as specified and directed by Engineer-in-Charge.

Removal of surplus spoil/excavated material exc. 250 m but n exc. 500 m and depositing where directed.

Demolition of brick and stone masnary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes all as specified and directed

M&L brick work with sub class ‘B’ modular bricks straight or curved o plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

Material & labour PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching ,kerbs compelete all as specified and directed

M&L for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation filling & mass concrete.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping for manhole including slightly rounded or chamfered angles and including necessary form work finishing exposed surface.

Extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc.

Taking up broken old sewage pipe any type and size line in average depth 1.00mtr and removal of soil upto 500m complete all as directed.

Provinding lowering, laying, aligning, fixing in position and joining at all level/ depths full round HDPE DWC (Duble wall corrugated) 150 mm dia pipes with reqd jointing accessories of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site fortesting) and Comissioning as per Technical Specifications, drawings and as per direction of Engineer in charge.

M&L for Salt glazed stone ware (SGSW) drain pipes of grade 'A' 150mm bore laid in trenches and jointed complete.

M&L for Reinforced concrete pipes, class NP2, including jointing with cement joints 150 mm bore laid in trenches and jointed complete all as spd and directed

Dismantling of cast iron 100 mm including fitting or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required.

-ditto- all as per item No 125 but, 75 mm bore.

Supply & Fixing 100 mm bore sand cast iron pipes in any length fixed to walls complete.

-ditto-all as per item No 127 but, 75 mm bore.

S&F 100 mm CI bends (any radius), spun pipe fittings diminishing pieces or tapers (larger bore measured) without oval access door including replacing unservicable bend if any.

S&F 75 mm CI bends (any radius), spun pipe fittings diminishing pieces or tapers (larger bore measured) without oval access door including replacing unservicable bend if any

S&F 100mm CI branch pieces, single (equal or unequal), spun pipe fittings, 'Tee' & 'Y' ordinary or inverted (spigot or socket type) or with parallel branches without oval access door including replacing unservicable bend if any

S&F 75mm CI branch pieces, single (equal or unequal), spun pipe fittings, 'Tee' & 'Y' ordinary or inverted (spigot or socket type) or with parallel branches without oval access door including replacing unservicable bend if any

Demolition and breaking up of AC rain water pipe /UPVC pipe line 100mm/75mm dia incl all fittings, complete all as specified.

Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 75 mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)

Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified. .(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534

Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified.

Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent cement, complete all as specified.

Supply & Fixed for 75 mm bore UPVC (SWR) bend including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)

Cutting into existing manholes for connecting new sewage line / diverting some line to new manhole for smooth flow ; 225mm bore (internal dia of pipe ) incl making good to disturbed benching and haunching, plaster etc and forming new branch channel ( ½ round of ¾ section) if required in cement concrete 1:2:4 type B1 and smooth finished , reforming benching as required and as directed for internal dia for the following pipe. (Each Man hole shall be measured under this item )

M&L for 50mm thick sand stone slab in as in manholes/gully trap/drain cover stone etc as reqd size all as specified and directed.

M&L for demolition of reinforced cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) all as specified and directed

M&L for providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in cover slabs (for manholes, drains etc.) of any size and thickness as required Set in cement mortar 1:4 Note :- Reinforcement will be measured and paid saperately.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

Fixing only in repair PVC SWR pipe 110mm dia

Fixing only in repair PVC SWR pipe 75mm dia

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through in concealed and PVC casing caping with all accessories as required and directed by Engr-in charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly, suitable for One light/fan/bell point controlled by one 5 Amps SP switch, complete all as specified and as directed.

All as per item No. 150 here-in-above, but one 5 pin 5 Amps socket outlet on same board

All as per item No. 151 here-in-above, but one 5 Pin 5 Amps socket outlet on independent board

All as per item No. 152 here-in-above, but one light point controlled by two 2-way switch

All as per item No. 153 here-in-above, but one power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

Supply & Fixing switch piano type, flush button single pole, one way 5 amps complete all as specified and directed.

Supply & Fixing switch piano type, flush button single pole, two way 5 amps complete all as specified and directed.

Supply & Fixing switch Bell Push, flush type 5 amps complete all as specified and directed.

Supply & Fixing Buzzer, Ding Dong AC 230 volt single pole complete all as specified and directed.

M&L socket outlet 5 amps, 5 Pin, flush type complete all as specified and directed.

M&L socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.

M&L switch 16 Amps complete all as specified and directed.

Supply & Fixing Modular switch 1 way 6A,1 module complete all as specified and directed.

M&L Socket, 6A - 2/3 pin combined 2 module, type complete all as specified and directed. (Make: Anchor/Havells/GM)

Supply & Fixing modular switch 1 way 16A, 1 module complete all as specified and directed. (Make: Anchor/Havells/GM)

M&L Socket 6A/16A - 2/3 pin combined 2 modular type complete all as specified and directed. (Make: Anchor/Havells/GM)

Supply & Fixing of ceiling rose, surface type bakelite 65 x 50 mm three terminal complete all as specified and directed.

Supply & Fixing of lamp holder , insulated body cord grip pattern suitable fixing on wall/ pendant fittings.

Supply & Fixing of ceiling fan regulator step up type 230 volts suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

Supply & Fixing of condensor for ceiling fan 230 volts complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type.

(a) 12 ways

(b) 08 ways

(c) 04 ways

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of foour poles (TPN) and current carrying capacity 40 Amp to 100 Amp in the DB complete with connection testing and commissioning.

Supply and fixing SPN 40 TO 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x2.5 sq.mm + 1x2.5 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

M & L for wiring for circuit/submain wiring in PVC conduit alongwith earth wire with the following sizes of 2x4 sq.mm + 1x4 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 4 sqmm cable with combined of R,Y & B and one run of 4 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of uitable size from ceiling rose complete all as per directed by Engr-in-Charge.

Taking down old U/S exhaust fan and supply and fixing metal/PVC frame exhaust fan of size 200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

Taking down old unserviceable GI pipe and supply and laying new GI pipe 20 mm dia medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size ltrs/50 ltrs etc. complete all as specified.

Supply and replace Ball valves of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) (Make : Prayag/Polytuff/Pearl)

Taking down & Fixing geyser of cap 25 ltrs/50 ltrs incl grouting of bolts 10mmx150mm long with cement including making good and matching existing surgace and finish all as directed.

Material & Labour for repair to inner tank of geyser cap 25/50 ltr complete taking down the geyser opening outer cover and taking out inner tank soldering/ welding/breezing the tank, testing with filling water, reassembling the geyser complete and fixed on position all as directed

Material & Labour for supply and replacement of glasswool for geyser cap 25/50 Ltr complete opening the geyser taking out old U/S glass wool and replace with new glasswool reassembling and fixed on position all as directed

Material & Labour for replacement in repairs stop valves cast copper alloy screwed down high pressure with fancy type cromium plated 15mm dia bore both ends screwed.

Supply and replace Heavy duty PVC connection with SS nuts and washer suitable for hot water, complete of size15mm dia x 45cms long all as directed

ditto as per item No 186 but 600mm long

Supply and replace heating element ISI marked of suitable type as per existing including rubber ring clamping screws etc complete of 1.5/2.0 KW

Supply and replace heating element suitable for surya geysers round type including rubber ring clamping screws etc complete of 1.5/2.0 KW.

Supply and replace themostatic switch ISI marked for geyser as per existing of range 15-65 degree temparature.

Supply and replace syphonic assembly for geyser as per existing size and suitable for surya geysrs 25 ltrs capacity.

S&F in replacement of unsevicebale indicating lamps for geysers of Bajaj/Veenus/Ditz/Sphare hot/Sidhson or any other make complete all as specified and directed by engineer-in-Charge.

Supply and replace vacuum release valve on inlet side of geyser.

Supply and replace brass chromium plated horizontal/vertical non return valve of size 15mm dia bore ISI marked on inlet side of geyser.

Supply and replace pressure release valve for Geyser complete

Supply & Replace 3 Pin Plug top 15 Amp

ARTI CONSTRUCTION (BID ID -3467487)

Badri Electricals (BID ID -3467476)

ALBA AC AND REF SERVICES (BID ID -3467934)

THE SHIVAM ENTERPRISES (BID ID -3466955)

M.A. MUNSHI AND CO. (BID ID -3467136)

Abhishek Enterprises (BID ID -3467480)

divyarsh entrprise (BID ID -3467481)