Providing half and full cabin partition with split type AC provisions for accomodating Project Management Unit in the Office of the Planning and Research Department, Puducherry.

Amount

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc complete.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 75 X 45 X 3.2 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with necessary screws etc. Complete - 300 x 10 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with necessary screws etc. Complete - 100 x10 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete - 125 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 75 mm.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete - Twin rubber stopper.

Providing and fixing teak wood lipping / moulded beading or taj beading of size 18 x 5 mm fixed with wooden adhesive of approved quality and screws / nails on the edges of the Pre - laminated particle board.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc complete - Double strip horizontal type.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete.

Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 type S, including cost of adhesive of approved quality - 1.0 mm thick.

Providing and fixing of 65 mm Godrej Navatal lock of 7 levers with 3 keys etc complete.

French spirit polishing - Two or more coats on new works including a coat of wood filler

Acid cleaning for the existing Mosaic floors , glazed tiles work and removing the stains and decays to give a glassy look etc complet (The Acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws, all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P.brass / stainless steel screws etc. complete as per architectural drawings- Pre - laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of5.50 mm thickness.

Providing cutting and fixing to required shape and design 19mm thick plywood (BWR) For cupboard & shutters/table top/ bottom/ sides/ furniture/ partitions and the like. The rate is inclusive of cost of materials, all taxes, wastages, screws, nails, fevicol SH, special labour charges for making cupboard & shutters/ furnitures and finishing the surface neat after fixing in required position as directed by the Engineer-in-charge.

Providing and fixing stainless steel Buttertly hinges with necessary screws etc., complete.

Providing and fixing Multipurpose lock with necessary screws etc, complete.

Supplying of 3 star rated wall mountable Split type 1.5 ton capacity Air Conditioner unit (as per IS 1391 part 2) with following specification. Material for body for indoor unit ABS. Normal cooling capacity (K.cal./Hr): 5000 - 5500 power consumption max (watts): 1400 - 1500 watts, Min room discharge Air flow (CFM/Hr): 550 - 600. Air conditioner shall be suitable for 230V 50hz operation and capable of performing the function as cooling, air circulating and filtering and confirm to IS: 10617 part Carrier split A/C unit Model: NX series. The rate is inclusive of all taxes.

Installation charges for split type Air conditioner

Supplying of extra copper tubing.

Civil and angle works for indoor and outdoor units (including materials and labour charges)

Supplying and fixing of 4 KVA Valtage stabilizer. Make: Microtek (Double booster) The rate is inclusive of all taxes.

T Gunasekaran

P RAJENDIRANE

B Ashok