INTERNAL PERIDICAL AND MISC BR WORKS INCL INT ELECTRIFICATION WKS OF JCOS ORS MD ACCN AND OTM ACCN AND REPAIRS TO TOILET LEAKAGE SEAPAGE PLUMBING SANITARY FITTINGS AND SUNKEN TREATMENT ETC FOR JCOS ORS MD ACCN AND OTM ACCN IN THE AREA OF AGE B R

Amount

Dismantling of brick tiles or teracing tiles,single layer on roof.all as specified and directed.

Demolition of mud in roof any thickness, including plaster and leaping/whether full thickness removed on only a part thereof.

M&L for 40mm thick brick tiles laid on mud mortar and joints,grouted flush in cement mortar (1:3) mised with 5%of cured oil by wt of cement on mud phuska roof. All as spcf and directed.

All as per item no 3 above but except tiles.

M&L for 80mm thick consolidated thickness mud phuska of flat roof incl 25mm thick mud plaster & 3mm thick leeping plaster. All as spcfd and directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing

Dismantling of plain or corrugated steel sheeting, any gauge, thicness including nainital or similar pattern roof covering.

Dismantling Battens for tiles, shingles etc of any size including tiltling fillets spaced n.exc 15 cm.

Demolition of existing textile coverings including frames ( if any ) and cover fillets ( measured flat and not girthed )

Demolition of brick work including all quoins, arches, pillars, etc built in cement mortar all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm. all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel exc 1.5 sqm but n.exc 4 sqm each all as specified and directed.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each.

Refixing of shutters of any description exc 1 sqm but n.exc 2 sqm each in the same opening door exc 1 Sqm and not exc 2 Sqm on same opening all as specified and directed.

Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys scrubbing down with water etc.

Dismantling and taking down of water storage tank capacity 250 ltr to 500 ltrs of PVC , steel or RCC etc all as specified and directed.

Disconnecting existing tanks setting aside (or lowering if required) for repair,cleaning, etc and hositng if requried reconnecting and refixing in position.(cleaning reparing,etc measured separately) exc 500 & n. exc 1000ltrs all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 20mm bore pipe all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 15 mm bore pipe all as specified and directed.

M&L Indian type WC including demolittion of cement concrete (unreinforced) in sunken portion of WC, area n.exc 1.20 sqm including removing of unserviceable materials and Providing half brick surrounding walls , rendering 10 mm thick plaster in cement mortar ( 1:4 ) with WPC and laying lean concrete in bottom portion of WC and then applying 3mm thick APP membrane over bitumen primer surface of walls and bottom portion of WC with torch method , provide 32 mm dia GI tubing as spout of sunken portion 0.60 m long of approved quality , By filling Khanger / cinder and lean concrete, supply and fix vitreous china Squatting pan "Orissa pattern" size 580x440mm white, with integral foot rest & ' P' traps & jointing new 100 mm dia CI pipe with lead joints to WC ( excluding flushing cistern & flush pipe ) . Testing of sunken portion will be carried out by filling water for 24 Hrs in sunken area complete in all respect as specified and directed . Note : - ( i ) WPC, floor and dado tiles will be measured and paid separately. (ii) Guarantee for non leaking in 3 yrs shall be given by contractor and Rs. 1000/- for each job shall be kept from final bill are from RAR and shall be released after satisfactory completion of three years from the certified date of completion.

Demolition of cement concrete( unreinforced ) in ground floors and pavings n.exc 15 cm thicness ( below of above ground level )

M&L for Roof tiles Mangalore pattern, interlocing at side joints, laid dry complete all as specified and directed.

All as per item 22 above but except tiles

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side laps fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275 all as specified and directed.

All as per item 24 above but except sheeting.

M&L for 2 nd class hardwood in clean sawn battens at 15 cm centre to centre sectional area exc 5 & n.exc 15 sq.cm all as specified and directed.

M & L for Preparation of surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light and taking down old false ceiling complete all as specified and directed.

M&L for brick work in CM (1:6) straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks all as specified.

All as per item 29 above but except bricks

M&L for Brick wor with sub-class "B' Bricks straight or curved on plan to any radius in half brick thick wall built in CM ( 14) all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

S & F butt hinges 100mm size Medium weight cold rolled mild steel fixed complete all as specified.

S & F butt hinges 75 mm size Medium weight cold rolled mild steel fixed complete all as specified.

M&L 40 mm thick, plain framed, flush shutters with block board core and plywood face panel , commercial type both sides complete all as specified and directed.

S&F 35mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) all as specified and directed.

S&F 35mm thick 2nd class HW plain framed, panelled shutter factory made (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on other side and as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010 all as specified and directed.

S&F 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F in rep aluminium alloy, anodised, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long all as specified and directed.

S&F aluminium alloy handles anodised, fabricated type of size 150 mm all as specified and directed.

S&F Mild Steel 1.60 mm plain black sheet in steel gates and similar works , cut to size , holes punched; including round headed screws, clout nails or rivets and fixed to steel framing and welding seams , including bending or turning up,, mitred angles etc as required all as specified and directed.

S&F steel windows in ahmedabad section with double shutter on single frame side hung including projecting type hinges with steel handle, peg stay complete with glazing bars ( one side glazed shutter and other side fly proof shutter with and including 15x3 mm flat iron frame for fly proof shutter ), fixed in repairs.

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete in repairs , all as specified and directed by Engr-in-charge.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40mm Fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified.

S&F sheet glass ordinary quality, 3mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane all as specified and directed.

S & F 3 mm thick figured glass pin head type and glazing with oil putty n exc 0.5 Sqm in each pane all as specified and directed.

M&L for PCC (1:2:4 ) type B-1 ( using 20 mm graded stone aggregate ) as in bed blocks for fixing hold fasts of doos and windows frame complete all as specified and directed by engr-in-charge.

M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

M/L PCC 1:4:8, type D2, using 40 mm graded aggregate 75 mm thick as in sub floor, Sub base, floor complete all as specified & directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid over & including on dust/ 50mm thick cushioning, laid dry to the profile filling complete all as specified & directed.

M&L for Chequered cement concrete tiles25x25cmx 22 mm thick, set and jointed in neat cement slurry in floor and pointed with grey cement and pigment including 20mm thick screed in CM 1:6 for bed layer complete all as specified & directed.

M/L PCC 1:2:4, type B1 using 20mm graded stone agg as in bencing,roof kerb, bends and coping all as specified and directed.

M/L PCC 1:3:6, type C2 75mm thick fair finished surfaces .as in plinth protection/ foot path all as specified and directed.

M/L PCC 1:2:4, type B0 as aevelling course/padding to maintaining the slope of tiles using 12.5 mm graded stone aggregate all as specified and directed.

M/L PCC 1:2:4, type B1 25 mm thick as a levelling course/padding to maintaing the slop of tiles using 20 mm graded stone aggregate all as specified and directed

M&L for glass dividing strips , 3mm thic and width of strip 38mm inserted in position to confirm design all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of bricks work or concrete surfaces finished even and smooth using extra cement mixed with WPC(wpc is to be measured and paid separartely) all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on unfair faces of bricks work or concrete surfaces finished even and smooth without using extra cement all as specified and directed.

Supply only integral water proofing compound

Dismantling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting providing at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding & provision guniting pressure 2.2 to 2.5 Kg/Sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40mm including stripping floating withj wooden strippers for proper dimension control necessary form work & scaffolding up to four storey complete surface of guniting to be finished fair with 10mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3S as per manufacture instruction cleaning & removing of waste material etc as directed at site ( Welded mesh & addl reinforcement if required measured and paid separetly) Note: Only steel scaffolding is allowed and rate included in above item)

M&L preparation of newly plastered surface on walls and applying 2 coat of OBD over a one coat of primer complete all as specified.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified.

M&L for preparing new plastered surfaces of ceilling and applying three coats of white wash complete all as specified.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint incl a coat of primer complete all as specified .

Supply and fixed rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity hoisted and fixed in position and connecting up pipes securing access covers all as specified and directed

S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm each) for 20 mm bore of pipe all as specified and directed.

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor all as specified and directed.

M&L 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor all as specified and directed.

Refixing of old steel tubing and connections in new or old position (all/floor/ceilings etc ) of size 15 mm bore all as specified and directed.

Refixing of old steel tubing and connections in new or old position (all/floor/ceilings etc ) of size 20 mm bore all as specified and directed.

S&F 75 mm bore PVC (SWR) Pipes single socket or with rubber ring, fixed to walls or in any position including taking down old damaged pipes complete all as specified and directed.

S&F PVC(SWR) bends plain 75mm bore complete all as specifed and directed.

M&L for Non skid, coloured ceramic joint free tiles 7 to 8 mm thick 400 x 400mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

S&F non skid ceramic tiles 300X300X 7 mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick secreed in CM 1:6 for bed layer complete all as specifed and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick 400 x 400mm size of approved colour as in skirting/dado,etc including 10mm thick bacing coat in CM (1:4) to receive tiles ,set and jointed in neat cement slurry and pointed in coloured cement to match including triangular filleting in CM 1:4 on top complete all as specified & directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick rendering as backing coat on brick /concrete surfaces in cement mortar 1:4 rough finished on vertical surfaces to receive tiles etc. complete all as specified.

M&L for Vitrified Ceramic coloured dark shade tiles 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface insluding 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair 19 mm thick particle boards medium density, flat pressed, single , layer type or three layer type BWR type adhesive, fixed with beading/screws to timer frame/metal frame as in shutters, shelving to cup boards etc all as directed.

S&F in repair 15mm bore dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S&F in repair vitreous china Squatting pan "Orissa pattern" size 580x440xmm white, with integral foot rest. Complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.

M&L cast iron Nahani trap 75mm out let dia meter with grating incluiding jointing to waste pipe fixed in repair in cement concrete type B-1 (1:2:4) all as specified and directed.

S&F in repair Viterous China wash hand basin white, flat back size 550 x 400 mm incl CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed by Engineer in charge.

M&L for mild steel clamps, bands straps, supports or stays for soil waste pipe & rain water pipes including fixing clamps with coach screws etc complete all as spd and directed.

Dismantling cast iron pipe , jointed in cement mortar of any dia upto 100mm. all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches all as specified.

All as per srl item 92 above but 75mm bore pipes ditto.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door. all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door all as specified and directed.

M&L in rep for 15mm bore stop cock fancy type, chromium plated with long shank and cup (concealed type) all as specified and directed.

S&F in rep of Bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated. all as specified

M&L for marble makrana white work 18-20 mm thick (table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade.(shade and type as approved by Engr -in -charge) with screed bed or bedding layer of mortar 20mm thick in cement mortar 1:6 laying floor finishes all as specified.

Moulding of kota /marble stone full round complete all as specified.

S&F 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F in repair stainless steel plate rack of size 75 cm X 60 cm X 25 cm made of 1 mm thick sheets and as approved by GE.

S&F in rep sinks with drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs,washers and wastes coupling including bedding in cement mortar to dwarf wall, neccessary masonary work or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm . complete all as directed.

S&F in repairs drapery curtain rods Mild steel powder coated polished 25 mm dia incl brackets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for preparation of old surfaces by Complete removal of existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine within-built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc and applying two coat of Oil Bound Distemper over a coat of primer by using Air-less paint sprayer over 3mm thick water proofing wall care putty in two or more layer on prepared surfaces of wall . complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bounf distemper including preparation of old surfaces complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

M&L for preparing newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified .

M&L for preparation of old decoreated external wall surface by complete removal of existing treatment, filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and two coat of cement base paint complete all as specified and all as directed by Engineer in charge .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 3mm thick obscured or frosted, on one side and glazing with oil putty completesie of each pane not exc 0.50 Sqm complete all as specified and directed.

S & F in repair of 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps.

All as per srl item No 122 here-in-before but one fan point controlled by one, one way switch 06 Amps.

All as per srl item No 122 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per srl item No 122 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per Serial Item No 122 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete

S&F bell push, flush type, 06 Amps, 230 volts with switch frame complete

S&F switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete

S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete

S&F socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete

S&F ceiling fan regulator , stepped type of 0 to 04 rotary steps, electronic, 2 Module socket type, humfree, AC, 230 volts, 100 watts complete

Supply and fixing ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

Supply and fixing ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed. Make : SSK/Havells/Anchor

Supply and fixing lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting including 9W LED bulb complete all as specified & directed.

Supply and Fixing in repair surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells / Philips/polycab

Taking down of exsting u/s tube light fitting and supply and fixing in repair on surface and wall mounted LED batten with polycarbonate housing and initigarated electronic drive 20 Watt fixture 4 feet provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed.

Supply and fixing in repair on wall energy saving, eco friendly LED bulk head fitting 10Watt, IP 65surface mounted with ABS body & polycarbonate diffuser, etc and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as directed.

Taking down of exiting u/s security light fitting and supply and fixing energy saving LED security light fitting with lens of 45 watts Versatile pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and suitable GI tube bracket for mounting of light fitting, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of suitable flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fixing Ventilating fan wall mounted type of 250 mm sweep, 230 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed by Engineer - in - charge.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make: - Legrand/Havells/Hager/Schneider

Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 230 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing in repair sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:- Make :-Legrand/Havells/Indoasian/Schneider (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No. Make :- Legrand/Havells/Indoasian/Schneider (b) MCB, SP, AC, 230 volts of 06 to 32 Amps, "C" curve, 10 KA breaking capacity - 12 Nos. Make :- Legrand/Havells/Indoasian/Schneider

Supply and fixing in repair MCB, SP, AC, 230 volts of 10 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing in repair MCB, DP, AC, 230 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand/Havells/Hager/Schneider

Supply & fixing in repair MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 70503.00

M/S AADI ENTERPRISES

Simran construction Company

RASTOGI BUILDERS

The new hut furnitures

ANSH VANSH CONSTRUCTION COMPANY

V M CONSTRUCTION

QUALITY CONSTRUCTIONS CO