ADDITION ALTERATION TO ADMINISTRATIVE BLOCK WARD ROOM ANNEXE FENCING GATE AT ARAKKONAM

Amount

Excavation in trenches, 1.5 m wide and n exc 1.5 m in depth; for foundation, cable laying etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in sof / loose soil complete all as specified and as directed.

M & L for Plain Cement concrete type D2 1:4:8 (using 40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed

M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting / dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10 mm thick back coat in cement mortar 1:3 complete all as specified and as directed

M & L for second class hardwood Plain fillets of sectional area exc 13 sqm but not exc 25 sqm, square, rectangular or triangular in section, clean sawn, se-cured with nails or brads complete all as specified and as directed.

M & L for second class hardwood plain fillets of sectional area exc 3 sqm but not exc 6 sqm bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed

Preparing surfaces of wood and wood based materials, new or old, of any description and girth , not otherwise described and treated with one coat of creosote oil complete all as specified and as directed

M & L for 12 mm thick plywood, 7 ply , grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed

M & L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and patttern as approved , fixed with approved adhesive as per manufacturers instructions complete all as specified and as directed

Supply and fixing anodised aluminium size of 605 x 605mm snap grid frame work for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S & F 12mm thick gypsum cement building boards in appropriate size fixed or laid/ inserted to powder coated aluminium frame work with screws as in ceiling fixed as per manufacturers instructions (Make : Armstrong/ Saint Gobain (Gyproc)/ Indian Gypsum Pvt Ltd

Material and labour for preparations of new ceiling surfaces of gypsum board and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed

Returning filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soil in foundation etc

Removing excavated material exc 50 mtr but not exc 250 mtr and depositing where directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S & F wind ties for roof including securing bolts: and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Preparation of new wooden surfaces of any description n exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed

Material and labour for complete removal of existing treatment on old treated wall surfaces and applying two coats of oil bound distemper over a coat of alakli resistant primer including 3 mm thick wall care putty etc complete all as specified and as directed

Material and labour for complete removal of existing treatment on old plastered wall surfaces and applying two coats of exterior acrylic emulsion weather proof paint over a coat of primer etc complete all as specified and as directed

Material and labour for one coat of synthetic enamel painting on old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation complete all as specified and as directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) all as directed

Demolition of cement concrete in ground floors and pavings exc 15 cm thickness but above ground floors

M & L for 25 mm thick PCC 1:2:4 type B1 (12.50 mm graded aggregate) as in sub base to flooring complete all as specified and as directed

Material and labour for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors/ etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15mm thick in cement mortar 1:4 etc complete all as specified and as directed.

All as per ser item No 29 above but in skirting over and including 10 mm thick in cement mortar 1:3 backing coat etc complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and as directed.

M & L for coloured glazed ceramic tiles in vertical surface 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick back coat in CM 1:3 complete all as specified and as directed.

Taking down steel windows of any description with frames including guard bars (Glazed window, flyproof window and guard bars) area exceeding n exc 1.0 Sqm each and making good the disturbed plastered surfaces with 10 mm thick plaster in CM 1:6 finished to match the existing surface complete all as specified and as directed.

Taking down steel windows of any description with frames including guard bars (Glazed window, fly proof window and guard bars) area exceeding 1.0 Sqm but not exceeding 2 Sqm each and making good the disturbed plastered surfaces with 10 mm thick plaster in CM 1:6 finished to match the existing surface complete all as specified and as directed.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding / side hung type aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified and as directed

Supply and fix powder coated anodized aluminium grill of 8mm x 8mm bars size of opening 10 cms size mesh with aluminium channel 'F' / 'U' angle 20mm x 15mm aluminium frame work all as specified and as directed.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with rubber packing, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix 4mm thick figured glass, pin head type and glazing, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S & F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers

S & F in repairs 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws in pelmet boxes or in narrow widths n exc 15cm each, rebated or flat edged complete all as specified and as directed.

S & F in repairs Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc

S & F in repairs wash hand basin vitreous china, white, flat back, size 550 x 400 mm excluding taps, waste pipe, chain and plug but including brackets complete all as specified and as directed

S & F 32 mm dia waste coupling of PTMT (half or full threaded) minimum weight 32 mm 45 gms good the disturbed plastered surfaces with 10 mm thick plaster in CM 1:6 complete all as specified and as directed.

Supply and fix in repairs Pillar tap 15 mm bore, brass with capstan heads, chromium plated, fancy type, long Neck with aerator conforming to IS as per Cat No.PIS-02 of Prayag or Cat No.CON-021KN of Jaquar or T1603C of HR Johnson or G2402A1 of Parryware or equivalent of KOHLER / MARC, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed.

S & F in repairs wash down water closet (Pedestal pattern) incl PVC seat cover , complete white (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repairs 10 litres capaity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply and fix in repairs Angular stop cock 15mm bore, brass, chromium plated, fancy type conforming to IS as per Cat No.PIS-10 of Prayag or Cat No.CON-053KN of Jaquar or T1810C of HR Johnson or G3053A1 of Parryware or equivalent of KOHLER / MARC, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS as per Cat No.PIS-06 of Prayag or Cat No.CON-037KN of Jaquar or T1805C of HR Johnson or G1404A1 of Parryware or equivalent of KOHLER / MARC screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs Brass wall mixer, Chromium plated 3 in 1 system with provision of both telephone shower and overhead shower complete with 115 mm long bend pipe and wall flange all as per Cat No.8275 of Prayag or Cat. No.CON-281KN of Jaquar or T1723C of HR Johnson or G1417A1 of Parryware or equivalent of KOHLER / MARC complete all as specified and as directed.

Supply and fix in repairs health faucet (hand shower) with 1.0metre long tube with wall hook, chromium plated as per Cat No.BEA-41 of Prayag or Cat No.ALD-563 of Jaquar or O0426C of HR Johnson or T9961A1 of Parryware or equivalent of KOHLER / MARC complete all as specified and as directed.

Supply and fix as in repairs tubular towel rail brass chromium plated, 20mm dia D type, 60cm long between flanges complete all all as per Cat No.BA-01 of Prayag or equivalent make of Paryyware/Kohler/Marc complete all as specified and as directed.

Supply and fix Over head shower rose with arms, ABS body chromium plated with revolving joint and 125 mm dia round shaped single flow with rubit cleaning system all as per Cat No BS-76 of Prayag or Cat No.OHS-1989 of Jaquar or equivalent of Johnson / Parryware / Kohler / Marc complete all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F in repairs 40 mm dia PVC high density polyethylene (HDPE) pipes of pressure rating 6 Kgf/sq cm complete all as specified and as directed.

M & L 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm PVC (SWR) bends with access door complete all as specified and as directed.

S & F 110 mm PVC (SWR) bends with access door complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) and removal from site complete all as specified and as directed.

S & F pressed steel frames of size 165 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

S & F hold fasts and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame complete all as specified and as directed.

S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer on both faces with lipping/ frame to match the frame etc complete all as specified and as directed.

S & F 35 mm thick 2nd class hardwood plain Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing complete all as specified and as directed.

S & F butt hinges, medium weight, 100 mm long, cold rolled mild steel complete all as specified and as directed.

S & F aluminium anodised , barrel tower bolts, of extruded section 150 mm long complete all as specified and as directed.

S & F 150 mm long aluminium handles, oval cast type, anodised complete all as specified and as directed.

S & F 300 mm long aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F in repairs floor door stopper of aluminium alloy body and tongue, 150 mm overall length of cover plate, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S & F in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws in pelmet boxes or in narrow widths n exc 15cm each, rebated or flat edged complete all as specified and as directed.

S & F 18/19 mm external teak wood lipping 6 mm thick, fixed with nails complete all as specified and as directed.

S & F 30 mm flap width, Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

S & F 100 mm brass handles, cast type, polished bright complete all as specified and as directed.

S & F 75 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Material and labour for preparation of old decorated ceiling surfaces and applying one coat of white wash etc complete all as specified and as directed.

Material and labour for complete removal of existing treatment on old treated wall surfaces and applying two coats of white wash etc complete all as specified and as directed.

Taking up or down 15 mm dia steel tubing and connections etc complete all as specified and as directed.

Supply and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

Taking up or down 20 mm dia steel tubing and connections etc complete all as specified and as directed.

Supply and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

Dismantling water tanks exc 500 ltr and not exc 1000 ltr capacity including removal from site.

S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed.

S & F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) etc complete all as specified and as directed.

S & F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and as directed.

Demolition of reinforced Cement concrete in above ground floors exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry built in cement mortor including all quoins, arches, pillars etc., but excluding ashlar facing dressed stone work and precast concrete articles built in cement mortor etc complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and as directed.

M&L Preparing new plastered surfaces and applying two coat of distemper oil emulsion, white or tinted over a coat of primer on walls etc complete all as specified and as directed. .

M&L Preparing new plastered surfaces and applying two coat of cement paint over a coat of primer on wallsetc complete all as specified and as directed.

Material and labour for reinforced cement concrete (nominal mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete type B1 1:2:4 (20 mm graded aggregate) etc complete all as specified and as directed.

Material and labour for reinforced cement concrete (nominal mix) in Columns, pillars, piers, posts and struts with type B1 1:2:4 (20 mm graded aggregate) etc complete all as specified and as directed.

Material and labour for reinforced cement concrete (nominal mix) as in beams, lintels over 1.5m span RCC 1:2:4 with type B1, (using 20 mm graded aggregate) etc complete all as specified and as directed.

use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces etc complete all as specified and as directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces etc complete all as specified and as directed.

Use and waste of Formwork to sides and bottom of roof beams , lintels etc of rough finished surfaces etc complete all as specified and as directed.

Use and waste of Formwork to sides and bottom of roof / floor beams curved beams , curved lintels etc of rough finished surfaces etc complete all as specified and as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

All as item No. 104 above but 5mm dia and over upto and including 10mm dia as in stirrups.

Material and labour for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in coping including necessary form work etc., complete all as specified and as directed .

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engr-in-charge.

All as per item No.108 here-in-before but except stone.

Material and labour for flush pointing to square rubble masonry brought upto courses in CM 1:4 complete all as specified and as directed

Material and labour for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forgeted into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality- B complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil

M&L for hardcore of gauge not exc 63mm graded stone aggregates, deposited, spread and eveled in layers not exc 15 cm thick including watered and rammed to a true surface complete all as specified and as directed.

Material and labour Screed bed or bedding layer of Cement mortar of 1:4, 15 mm thick for laying floor finishes complete all as specified and as directed by Engr-in-charge.

Material and labour white Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for 50mm Cement concrete type C- 1, 1:3:6 (20mm graded aggregate) as in plinth protection finishing surface even and fair without using extra cement

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-charge.

S&F 2 lever Mortice lock, vertical type, size 100 mm complete all as specified and as directed by Engr-in-charge.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F solid stainless steel or brass Navy steel emblem / logo of size 600mm X450mm complete all as specified and as directed.

S & F Solid stainless steel letters of size (20mm X 150mm) of any Nos permanently fixed to any surface, any position in required format complete all as specified and as directed

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC conduit concealed (fixed on wall/roof/ceiling etc), of size not less than 20 mm dia and including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following:- Make for PVC conduit : SUDHAKAR / AVON PLAST /FINOLEX . Make for Copper cable: Finolex/Polycab/ Plaza.

One light point controlled by one switch .

One 3 pin switch socket combination outlet 5 Amps, independent board

S&F for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed Make: Anchor/Cona/Leader

M&L for switch piano type flush button single pole one way 240 V 5/6 Amps. Make: Anchor/Cona/Leader

M&L for ceiling rose surface bakelite 65 mm x 50 mm 3 terminals. Make: Anchor/Cona/Leader

Supply and fix high efficiency wall mounted LED batten type not less than18W 4 ft LED light fitting complete all as specified and as directed. Make :Crompton Cat Part No :LDL-20-CDL / Surya Cat ref SLE BTN T8 20W/Philips/wipro.

S&F MCB TPN enclosure DB 4 way double door with spreader terminals, insulating phase barrier and hardware with neccesary arrangements all as specified and directed. Note :- (i) MCBs shall be measured and paid separetly under the respective item of shedule. Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix MCB TPN 63 amps 415 volts "C" series . Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge. Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix rectangle back light LED sign board outdoor light type and including necessary fixing arrangement complete all as specified and as directed

Supply and fix energy saving wall mounting fan 400 mm with all standard accessories to work on AC single phase 230/240 V, 50 Hz etc all as specified and directed by Engr in Charge.Make :Almonard/ Bajaj/Orient/Polar.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

Supply and spread riddled earth for UG cable cushioning including punning on top and bottom of the cable complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for for 16 sqmm 4 core all as specified and as directed. Make -: UNIVERSAL / POLYCAB / NICCO / PLAZA /HAVELLS.

Material and labour for GI Pipe 40 mm light grade galvanised, with all fitting laid in trenches / wall / floor all as specified and directed. Make:TATA/Jindal/Prakash/Zenith.

M&L Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly underground vertically (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate at a depth not less than 1.5m below ground level connected with and incl GI Earth wire 4mm dia , alternate 5 layers of charcoal (250 Kg) & salt crystal (200Kg )and top two inches layers with Back filling compound (100 Kg), in 15 mm dia GI pipe light grade by means of nuts bolts, washers and necessary earth work in any type of soil PCC (1:3:6) type C1 chamber and RCC(1:2:4)type B-1cover and watering pipe 20mm dia medium grade with funnel complete with mesh,refiling with black cotton soil all as specified . Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, renforcement removal of surplus soil , site clearance etc. (ii) GI Earth wire 4mm dia, GI tubing light grade 15 mm dia upto 7.5m deemed to be included the rate quoted by the contractor.(iii) Beyond 7.5 M the GI Earth wire 4mm dia & GI pipe light grade 40 mm dia shall be measured under the respective item of the schedule..

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make for Copper cable: Finolex/Polycab/ Plaza.

One light point controlled by one switch.

One fan point controlled by one switch.

One 3 pin socket outlet 5 Amps in the same board

All as per item ser no-141 here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.

S&F for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal as specified and as directed by Engr-in-Charge

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc all as specified and as directed by Engr-in-Charge

Supply and fix in repair high efficiency wall mounted LED batten type not less then 18W 4 ft LED light fitting incl taking down old fittings complete all as specified and as directed by Engr-in-Charge

Supply and fix for high efficiency modern 24 watts 2 x 2 sqft LED light with panel for recesssed dust free installation with high brightness LEDs for glare free homogenous illumination incl taking down old unserviceable fittings complete all as directed by Engr-in-Charge

Supply and fix 230 V, 1200mm smart saver-50 of Orient or equivalent of Crompton / Bajaj / Usha

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good the disturbed surface with plaster in cement mortar (1:3) as per the existing surface after carryiing out the concealed wiring including necessary finishes all as directed.

Suply and fix Emergency light, not less than 10 watts with downlight complete all as specified and directed

Supply and fix surface/ceiling mounted LED indoor track light type not less than 10W and including necessary fixing arrangement such as track,end cap,dead end cap, straight connector and suspension kit etc, complete all as specified and as directed.

Supply, Fixing and Testing LED flood light fitting of not less than 10 Watt, Luminaire fitting of IP 65 protection comprises of Pressure die cast Aluminium housing powder coated, toughened glass,luminaire efficacy not less than 100 lm/w provided incl necessary fixing arrangement complete all as specified and directed.

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed / PVC conduit of appropriate size 2x 4 sqmm and 1x 4 sqmm as earth wire Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately.

S&F MCB, DB SPN 02 way in SS enclosure type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed. Make: Legrand/ Siemens/Scheneider/ABB

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed. Make: Legrand/ Siemens/Scheneider/ABB

S&F in repair for Lamp holder angular/batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed by Engr-in-Charge .

SREE BALAJI ENTERPRISES

VEYEM ENGINEERING SERVICES

diesel power services (a.p)

N SRINIVASAN

R.P.TRADERS